Yongnuo YN650EX-RF Manuale utente
1To prevent fire or electrical shock, please do not expose the product to
rain or moisture.
To avoid short circuit, please make sure the batteries contacts are
securely packed and in accordance with local provisions when handling
the battery.
Keep the batteries and other accessories out of the reach of children. If a
child or infant swallows a battery or accessory, please contact a doctor
immediately.
To avoid possible injury to eyes, do not use the flash near the eyes.
To avoid possible safety accident, do not use the flash light on the
people who need to keep highly focused.
If the following situations happen, please remove the batteries
immediately and stop using the flash:
The product falls or is struck seriously and internal parts are exposed.
If the corrosive liquid inside the battery leaks, please take out the
battery with gloves.
The product gives off strange smell, heat, or smokes.
Do not disassemble or repair this product by yourself. High-voltage
internal parts may cause electrical shock.Please remove all the batteries
when the product is not in use for a prolonged period.
Precautions
Conventions used in this user manual:
In order to learn and master the operation of this speed-lite, at the
meanwhile you read this manual, please take user manual of your
camera as reference.
In every operating step, we assume that both camera and speed-lite are
power on.
Icons used in this user manual
：Supplementary information
：Long press the button
：Short press the button
2Integrated Transceiver and Receiver, Compatible with YONGNUO RF Radio Trigger System (RF602/603)During radio transmission wireless shooting,this product can be used as a
master unit or slave unit.It is fully compatible with RF radio triggering
signals from YN650EX-RF / YN685EX-RF / YN320EX / YN685(II) / YN720 /
YN560 IV / YN660 / YN560 III / YN560-TX (pro) / RF603 / RF602 / YN32-TX.
And it also contains 16 transmission channels and 10000 wireless radio ID,
making it easy for multi-flash lighting.
Note: Please set the ID of YN685EX-RF as 0000 when using it with products
that do not support ID setting.
Supports Multi-group Flashes Independent ControlWhen used as a radio master unit, the product is able to control 5
independent groups, performing remote control of flash mode, flash
output and focal length for YN650EX-RF / YN685EX-RF / YN320EX /
YN685(II) / YN720 / YN560 IV / YN660 / YN560 III.
Supports Optical Transmission Wireless Slave Flash In optical transmission wireless flashing shooting, YN685EX-RF can be set
as slave unit to receive optical transmission wireless signals from YN320EX
and from Sony flashes such as HVL-F32M, HVL-F60RM, HVL-F60M,
performing off-camera TTL mode flashing.
High GN; Supports TTL, M and Multi Mode, High-speed Synchronization FlashGN60@ISO100, 200mm,supports TTL, M, Multi flash,with high-speed
synchronization function, all shutters are available for shooting, the
maximum shutter synchronization speed is up to 1/8000s.
Firmware UpdateThe product is equipped with a USB port, you can download the latest
firmware from YONGNUO official website to upgrade the product.
Super-speed Recycle System; Supports external battery pack The flash recycle with full output only needs 2s to perform. Even if without
any new battery, it only takes 3-4s to perform the fast flash recycle. With
the use of compact battery pack, higher recycle needs can be met.
Real-time Display of Power ConsumptionWith real-time display of battery power, it's easy to know the power
consumption.
Electric ZoomEquipped with auto zoom and manual zoom, the flash coverage can be
set in the range of 20 to 200mm, so that the fill light is more uniform and
effective.
Sound prompt, Custom Function and Autosave FunctionLCD Display Screen and Standard PC Synchronous Interface EquippedFeatures
Precautions...................................................................1Features........................................................................2Quick Start....................................................................4Nomenclature...............................................................5The Part NameLCD PanelRecycle Indicator StatusLINK Indicator Status DescriptionSlave Unit Recycle Indicator DescriptionSound Prompt DescriptionInstallation and Detachment........................................9Installing the BatteriesAttaching the Flash to the CameraDetaching the FlashBasic Functions...........................................................10Power-on and Power-offButton Lock FunctionTest FlashTTL ModeM ModeMULTI ModeZOOM: Setting the Flash CoverageCamera Menu AccessAuto-assist Focusing LampPower Saving ModeOverheat ProtectionSound PromptOff-camera Status IndicatorAutosavePC Sync PortClearing Flash SettingsFirmware UpgradeAdvanced Applications...............................................15High-speed Sync FlashRear-curtain SyncRemote Wireless FlashFlash Exposure CompensationFEL/AEL LockHigh-speed Continuous ShootingBounce FlashUse [Catchlight Panel] for ShootingUse Wide PanelWireless Flash Shooting .............................................182.4GHz Radio TransmissionOptical TransmissionCustom Function Settings ..........................................23Troubleshooting Guide...............................................25Specification...............................................................26Chapters3
If you don’t have much time to read the whole user manual, we advise you to read this section.1.Please avoid the excessive use of maximum power output, which can
effectively extend the service life of the product. (It is recommended that
the flash should be idle for more than 10 minutes when overheat
protection is activated.)
2.Press the [MODE] button for seconds to enter trigger mode selection.
Turn the [DIAL] to select a trigger mode.
3.Press the [MODE] button to switch flash modes between TTL/M/Multi/
Gr. (Gr mode only works when the flash is set as radio wireless master
unit.)
4.Turn the [DIAL] to adjust the selected value and press the [SET] button
to save the settings.
5.Press the [Zm/C.Fn] button to enter focal length setting. Press the
[Zm/C.Fn] button for seconds to enter custom function setting.
6.The function buttons 1 to 4 vary according to the current flash status.
Function buttons can be used to operate the functions displayed on the
screen above the corresponding button. For more details, please read
the subsequent section.
7.Press the function button 2 and 3 at the same time for seconds, and
the settings of the flash can be reverted to their defaults.
8.Turn the flash OFF, press the [MODE] button for seconds to turn the
flash on and enter the upgrade interface.
Quick Start4
Nomenclature1.The Part NameCatchlight Panel
Wide Panel
Terminal Cover
Terminal Cover
Bracket Mounting Hole
PC Terminal
External Power
Source Socket
USB Port
Wireless Trigger
Sensor
Slave Unit Recycle
Indicator
Focus Assist
Lamp
Contacts
Bounce Angle Index
Function Button
Battery Compartment Cover
Battery Compartment Cover
Power Switch
Lock-release Button
Dial
[SET/SEL]Select /
Set Button
Test Button /
Recycle Indicator
[MODE]Mode Button /
Trigger Mode Button
LCD Panel
LINK Indicator
Mounting Foot 5
Nomenclature2.LCD PanelTTL AutoflashManual FlashMULTI FLashTTL Autoflash
:Flash
Exposure
Compensation
Manual Flash
MULTI FLash
Number of
Flashes Flash Frequency
:Overheating
ReminderFlash Output
:Auto Zoom Focal Length :Sound Prompt
:Battery Level
Flash Exposure
Compensation
Amount
:High-speed
Sync
Function Menu
:Manual Zoom 6
NomenclatureMaster UnitMaster Unit：Gr Flash Mode Slave UnitFlash Mode
:Master Flash
Shooting ON :Radio Transmission
:Optical Transmission
Exposure
Compensation
Channel
Master
Slave
:Master Flash
Shooting OFF
Gr:Gr Flash Mode
Firing Group
Flash Output/
Exposure
Compensation
Slave Unit Flash
Mode
Flash Mode
Firing Group
RATIO OFF:Flash Ratio ON
RATIO ON:Flash Ratio OFF 7
Nomenclature3.Recycle Indicator Status6.Sound Prompt DescriptionOverheat protection flash
limit is activated
Red and Blue
Light Blinking
Alternately
Stop shooting or turn off the
flash until it is cooled down.
Status Description Action
Red Light Lit The flash is charged and
ready to flash Normal
Wait until flash is fully chargedBlue Light Lit Flash charging is not
completed
a. The battery power is low,
and the flash is going to
power off automatically.
b. Overheating warning
a. Please change the battery.
b. Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Blue Light
Blinking
Reduce the flash frequency or
stop shooting until the flash is
cooled down.
Overheating warning
Red Light
Blinking
Status Description
Transmission OK
Sending or receiving
triggering instruction
Blue
Red
Status Description
Flash recycle of the slave
unit is not completed.
Flash recycle of the slave
unit completed.
Blinking
Off
4.LINK Indicator Status Description5.Slave Unit Recycle Indicator DescriptionSound Description
Power on; sound prompt on; flash OK
The flash exposure may be excessive.
Normal
Adjust exposure
settings or change
shooting conditions.
DiDi
Action
DiDiDi-DiDiDi
The flash exposure may be insufficient.
Adjust exposure
settings or change
shooting conditions.
Di Di Di
The flash isn’ t fully charged. Wait until flash is fully
charged.
Di--DiDi DiDi
The flash has been fully charged and is
ready for shooting. Normal
Di—Di lasts for
seconds
The battery power is low, and the flash is
going to power off automatically.
Please change the
battery.
Di-continuousl
y and quickly
Sleep mode is activated, and the flash is
going to power off automatically.
Please turn off the flash
and turn it on again.
Di-Di-Di- 8
1.Installing the BatteriesSlide and open the battery compartment cover in the direction of the
arrow as shown.
Insert the batteries according to the label inside and make sure the
direction of the battery contact (+/-) is correct.
Slide and close the battery compartment cover in the direction of the
arrow as shown.
Installation and Detachment2.Attaching the Flash to the CameraTurn off the flash, turn the [Lock-release Button] to the end (picture ①),
and slip the flash's [Mounting Foot] completely into camera's hot shoe
(picture ②). Turn the [Lock-release Button] until it is locked (picture ③).
Please use four standard specification AA batteries.To avoid circuit please do not use damaged batteries.3.Detaching the Flash Turn off the flash, turn the [Lock-release Button] to the end, and detach
the flash from the camera. 9
1.Power-on and Power-offSet the [Power Switch] to <ON>, and the flash
will be turned on and start being charged.
After turned on, the <Recycle Indicator> will
be turned on with red light,which indicates it
is ready to fire.
If the battery power is low, the flash will show
the <Low Battery Icon> with the <Recycle Indicator> blinking in blue, and
then automatically turned off. Please replace the battery currently.
After use, set the [Power Switch] to <OFF> to turn off the flash. It’ s
recommended to turn off the flash before you take out the batteries.
2.Button Lock FunctionSet the [Power Switch] to <LOCK>, to lock the [DIAL] and function buttons
of the flash. This function helps to prevent the flash settings from being
accidentally changed. When this function is on, if you operate this
function, <LOCK> will be displayed on the LCD panel.
3.Test FlashAfter the <Recycle Indicator> turns red, you
can press the [TEST] button to test whether
the flash fires normally.
4.TTL ModePress the [MODE] button to switch the flash
mode to TTL mode. In TTL mode, the camera's
metering system will detect the flash lighting
reflected from the subject, thereby adjust the
flash output automatically , so that the subject
and the background obtain balanced
exposure. The product supports functions such
as exposure compensation, high-speed sync, rear curtain sync,
exposure lock and camera menu access.
In TTL mode, you can also compensate the flash brightness. The
compensation range is -3EV to +3EV with the
accuracy of 1/3EV.
5.M ModePress the [MODE] button to switch the flash
mode to M mode. In M mode, you can set the
flash brightness according to your needs.
Basic Functions10
Questo manuale è adatto per i seguenti modelli
11
Indice
Altri manuali Yongnuo Accessori per fotocamere
Yongnuo
Yongnuo YN200 Manuale utente
Yongnuo
Yongnuo TOYUG YN-622C Manuale utente
Yongnuo
Yongnuo yn565ex II Manuale utente
Yongnuo
Yongnuo YNLUX200 Manuale utente
Yongnuo
Yongnuo yn565ex II Manuale utente
Yongnuo
Yongnuo yn-622n-tx Manuale utente
Yongnuo
Yongnuo YN565EXII Manuale utente
Yongnuo
Yongnuo TOYUG YN-622C Manuale utente
Yongnuo
Yongnuo YN-04II Manuale utente
Yongnuo
Yongnuo RF-603 II Manuale utente
