Z-EDGE ZAI03 Manuale utente
PORTABLE AIR INFLATOR
& POWER BANK
Please be sure to read this manual carefully before use.
ZAI03
USER GUIDE
Please read this instruction carefully before using this product for the
first time. It will guide you to use it correctly and remind you of the
relevant precautions.
This product is a portable smart air inflator & power bank, suitable
for the inflation of small cars tire, motorcycle tire, bicycle tire, balls
swimming ring and other inflatables.
When using this product to inflate, please notice the correct air pressure
value required by the product need to be inflated. The product and
hose will get hot after prolonged use. Children are not allowed to use
or play with it.
1
SAFETY INFORMATION
ACCESSORIES LIST
A
D E F G
B C
A. (1) Storage Bag
B. (1) ZAI03
C. (1) Hose
D. (1) Type-C Charging Cable
E. (1) Presta Valve Adapter
F. (1) Ball Needle Adapter
G. (1) Plastic Nozzle Adapter
Tip:
The illustrations of products,
accessories, user interface, etc.
in the manual are schematic
diagrams, for reference only,
please refer to the actual
product.
1
10
9
11
12
13
14
15
2
3
4
6
7
8
5
2
PRODUCT OVERVIEW
Exhaust
Hose Connection
Type-C Port (Input)
USB Charging Port (Output)
LED Light
Display Screen
Control Button
Power Button
1
2
3
4
5
6
7
8
Digital Display
Battery Indicator
Unit of Measurement
Process Bar
Preset Pressure
Scene Modes
Inlet
9
10
11
12
13
14
15
CONTROL BUTTON
3
U/LED
+
-
SET
Press
Switch unit of measurement
Press & Hold (3 Seconds):
Turn on/off LED light
Press
Activate air inflator
Press & Hold (3 Seconds):
Power ZAI03 on/off
Press
Increase 1 PSI / BAR / KPA
Press & Hold (3 Seconds):
Continual increase until released
Press
Decrease 1 PSI / BAR / KPA
Press & Hold (3 Seconds):
Continual decrease until released
Press
Switch scene modes
ADAPTER COMPATIBILITY
4
Suitable for
Cars, Trucks, Trailers, Motorcycle, Tires & more
Just connect it directly.
Schrader Valve (On the hose[C])
Suitable for
Bicycle Tires
Presta Valve
Suitable for
Basketballs, Soccer, Balls, Footballs,
Volleyballs, etc
Ball Needle
Suitable for
Pool Tubes, Floats, Balloons, Toys, etc.
Plastic Nozzle
The connection of the hose is shown in the following figure:
HOW TO USE
5
1. Charging
Use the Type-C charging cable to connect the air pump and the
adapter(Not Included) for charging.
Charging status: the battery indicator flashes
Full status: battery indicator is green, and does not flash.
Caution:
The product cannot be used during charging.
Battery Status 100%
Battery Status 60%
Battery Status 30%
Battery Status 5%
2. Power On/Off
Power On Power Off
Press the power button for 3
seconds to power on.
Press the power button for 3
seconds to power off.
Note:
Z-EDGE ZAI03 will automatically turn off after 3 minutes of inactivity.
6
+
U/LED
-
5. Preset pressure value
Press "+" "-" button: Adjust the preset pressure value.
Long press "+" "-" button: can quickly adjust the preset
pressure value.
Note:
The scene switch and preset pressure value are automatically saved by
the programm. You only need to switch the scene for the next use, and
the preset pressure is automatically set.
Press "SET" button to switch between the following five inflation scenarios.
Select the correct inflation scene before inflation.
Refer the default settings (below).
Car 35 2.4
40 2.7
38 2.6
80.5
0~150 0~10
0-65 PSI
0-55 PSI
0-100 PSI
0-15 PSI
0-100 PSI
Motorcycle
Bike
Ball
Customize
1PSI=6.89KPA 1BAR=100KPA 1kg/cm2=98KPA
3. Mode Switching
Press "U/LED" button to switch key, you can switch the air pressure display
unit. The unit conversion formula is shown below:
4. Unit Switching
Note:
Z-EDGE ZAI03 will automatically turn off after 3 minutes of inactivity.
MODE PSI BAR Range
Long press the button to turn on/off LED lighting.
6. Using The LED Light
7
7. Using The Air Inflator
Start to Inflate
Press the "Power Button"[8] to start inflation.
The digital display of the real-time air pressure value[9] changes
during inflation.
It will generate 75-80 dB noise during inflation and the
hose produces high temperature during long-term work.
Avoid prolonged contact with hose and hose joints[2] by hand.
Special Reminder
*Press the Power button to manually turn off the air compressor at any time.
The inflation pressure of items such as balloons, toy balls, swimming rings
and other products is lower than the range of this air pump, and the
inflation cannot be automatically stopped by the preset pressure.
8. Using The Power Bank
1. Use a compatible USB charging cable(Not included) to charge your
device via the USB output port.
2. Press the "Power Button"[8] to power on the ZAI03. The device
will begin to charge.
*When the power bank battery is low or your device is fully charged,
the inflator will shut down.
Press "SET" button to switch between the following five inflation scenarios.
Select the correct inflation scene before inflation.
Refer the default settings (below).
Note:
1. Always refer to the manufacturer's recommended PSI/BAR level for
the item being inflated
8
9. Measuring Pressure
After switching on, connect the air pipe to the measured object, and the
measured pressure value[9] shows the current pressure value.
10. Reset
After switching on, when the measured pressure value is not zero, long
press "U/LED" and "SET"key for 3 seconds to enter automatically reset.
Attention
- When the hose is unscrewed, the hose and the joint will produce high
temperature due to long time work.
- Do not touch it after a long working time.
- It is recommended to allow the device to cool down for a few minutes.
Note:
Products whose pressure are below the inflator's mininum range,
such as alloons, swimming rings, and ball for kids,cannot be measured
pressure.
9
SPECIFICATION
Model:
Battery Capacity:
Inflation Pressure:
Charging Input:
USB Output:
Charging Time:
Dimension:
Weight:
Working Temperature:
ZAI03
2000mAh / 14.8Wh
150PSI(Max.)
Type-C 5V / 2A
5V / 1.5A
±3H
6x2.3x1.5inch / 152x60x38mm
0.85LB / 385g
14-113°F / -10-45°C
Common unit conversion: 1BAR = 14.5PSI, 1BAR = 100KPA.
Indice
