Z-World OP7100 Manuale utente

OP7100

Serial Graphic Display

Users Manual

0190065  020418J

All manuals and user guides at all-guides.com

all-guides.com

OP7100 Users Manual

Part Number 019-0065



020418-J  Printed in U.S.A.

Z-World reserves the right to make changes and

improvements to its products without providing notice.

Notice to Users

Z-WORLD PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL

COMPONENTS IN LIFE-SUPPORT DEVICES OR SYSTEMS UNLESS A SPE-

CIFIC WRITTEN AGREEMENT REGARDING SUCH INTENDED USE IS EN-

TERED INTO BETWEEN THE CUSTOMER AND Z-WORLD PRIOR TO USE.

Life-support devices or systems are devices or systems intended for surgical im-

plantation into the body or to sustain life, and whose failure to perform, when

properly used in accordance with instructions for use provided in the labeling and

users manual, can be reasonably expected to result in significant injury.

No complex software or hardware system is perfect. Bugs are always present in a

system of any size. In order to prevent danger to life or property, it is the responsi-

bility of the system designer to incorporate redundant protective mechanisms ap-

propriate to the risk involved.

All Z-World products are 100 percent functionally tested. Additional testing may

include visual quality control inspections or mechanical defects analyzer inspections.

Specifications are based on characterization of tested sample units rather than testing

over temperature and voltage of each unit. Z-World may qualify components to operate

within a range of parameters that is different from the manufacturers recommended

range. This strategy is believed to be more economical and effective. Additional

testing or burn-in of an individual unit is available by special arrangement.

Trademarks

 Dynamic C®is a registered trademark of Z-World

 Windows® is a registered trademark of Microsoft Corporation

 PLCBusis a trademark of Z-World

Z-World, Inc.

2900 Spafford Street

Davis, California 95616-6800

USA

Telephone:

Facsimile:

Web Site:

E-Mail:

(530) 757-3737

(530) 753-5141

http://www.z world.com

zworld@zworld.com

All manuals and user guides at all-guides.com

Table of Contents siiiOP7100

TABLE OF CONTENTS

About This Manual vii

Chapter 1: Overview 11

Introduction..........................................................................................12

Features ................................................................................................13

Options ............................................................................................13

Development and Evaluation Tools .....................................................14

Software ..........................................................................................14

CE Compliance .................................................................................... 15

Chapter 2: Getting Started 17

Initial OP7100 Setup............................................................................18

Parts Required ................................................................................. 18

Setting Up the OP7100 ...................................................................18

Connecting the OP7100 to a Host PC..................................................20

Running Dynamic C .............................................................................22

Chapter 3: Hardware 23

OP7100 Subsystems Overview ............................................................24

Computing Module .........................................................................24

Power Management .............................................................................25

ADM691 Supervisor Chip .............................................................. 26

Handling Power Fluctuations........................................................26

Watchdog Timer ........................................................................... 27

Power Shutdown and Reset ..........................................................28

PFI Early Warning ..................................................................... 28

Memory Protection .......................................................................29

Battery Backup ............................................................................. 29

System Reset ...................................................................................29

Liquid Crystal Display (LCD) .............................................................30

Contrast Adjustment ........................................................................30

Background .....................................................................................31

Coordinate Systems.........................................................................32

Keypad Interface .................................................................................. 33

All manuals and user guides at all-guides.com

iv sTable of Contents OP7100

Digital I/O ............................................................................................34

Serial Communication..........................................................................35

RS-232 Communication .................................................................. 37

Receive and Transmit Buffers....................................................... 37

CTS/RTS Control .........................................................................38

Modem Communication ............................................................... 38

RS-485 Communication .................................................................. 39

Developing an RS-485 Network ................................................... 39

Use of the Serial Ports.....................................................................41

Z180 Serial Ports .......................................................................... 42

Asynchronous Serial Communication Interface...................................44

ASCI Status Registers ..................................................................... 44

/DCD0 (Data Carrier Detect)........................................................44

TIE (Transmitter Interrupt Enable) ............................................... 44

TDRE (Transmitter Data Register Empty) ...................................44

CTS1E (CTS Enable, Channel 1) .................................................45

RIE (Receiver Interrupt Enable) ...................................................45

FE (Framing Error) .......................................................................45

PE (Parity Error) ........................................................................... 45

OVRN (Overrun Error) ................................................................45

RDRF (Receiver Data Register Full) ............................................ 45

ASCI Control Register A ................................................................46

MOD0MOD2 (Data Format Mode Bits) .................................... 46

MPBR/EFR (Multiprocessor Bit Receive/Error Flag Reset)........46

/RTS0 (Request to Send, Channel 0) ............................................46

CKA1D (CKA1 Disable)..............................................................46

TE (Transmitter Enable) ............................................................... 46

RE (Receiver Enable) ...................................................................47

MPE (Multiprocessor Enable) ......................................................47

ASCI Control Register B ................................................................ 47

SS (Source/Speed Select) .............................................................47

DR (Divide Ratio) ........................................................................48

PEO (Parity Even/Odd) ................................................................48

/CTS/PS (Clear to Send/Prescaler) ............................................... 48

MP (Multiprocessor Mode) ..........................................................48

MPBT (Multiprocessor Bit Transmit) .......................................... 48

Chapter 4: Software 51

Supplied Software ................................................................................ 52

Digital I/O ............................................................................................53

Real-Time Clock (RTC) ....................................................................... 54

Display .................................................................................................55

Flash EPROM ................................................................................. 55

All manuals and user guides at all-guides.com

Table of Contents svOP7100

Dynamic C 32 Libraries .......................................................................56

OP71HW.LIB.................................................................................. 56

Keypad Programming ..................................................................... 64

Using Dynamic C v. 5.xx ..................................................................... 65

EZIOOP71.LIB ...............................................................................65

GLCD.LIB ......................................................................................65

KP_OP71.LIB ................................................................................. 69

SYS.LIB ..........................................................................................71

Chapter 5: Graphics Programming 73

Initialization .........................................................................................74

Drawing Primitives ..............................................................................74

Plot a Pixel ......................................................................................74

Plot a Line .......................................................................................75

Plot a Circle .................................................................................... 75

Plot a Polygon .................................................................................75

Fill a Circle ..................................................................................... 75

Fill a Polygon ..................................................................................75

Draw a Bitmap ................................................................................ 75

Font and Bitmap Conversion ............................................................... 76

Using the Font/Bitmap In Your Program ........................................ 77

Printing Text......................................................................................... 78

Keypad Programming .......................................................................... 79

Initialization ....................................................................................79

Scanning the Keypad.......................................................................79

Reading Keypad Activities .............................................................. 79

Chapter 6: Installation 81

Grounding ............................................................................................82

Installation Guidelines .........................................................................83

Mounting ..............................................................................................84

Bezel-Mount Installation.................................................................84

General Mounting Recommendations ............................................. 85

Appendix A: Troubleshooting 87

Out of the Box......................................................................................88

Dynamic C Will Not Start .................................................................... 89

Dynamic C Loses Serial Link ..............................................................89

OP7100 Repeatedly Resets .................................................................. 89

Common Programming Errors .............................................................90

All manuals and user guides at all-guides.com

vi sTable of Contents OP7100

Appendix B: Specifications 91

Electrical and Mechanical Specifications ............................................92

LCD Dimensions .............................................................................92

Bezel Dimensions ........................................................................... 92

General Specifications ....................................................................93

Header and Jumper Configurations ..................................................... 94

Appendix C: Memory, I/O Map, and Interrupt Vectors 97

OP7100 Memory ................................................................................. 98

Execution Timing ............................................................................99

Memory Map .....................................................................................100

Input/Output Select Map ............................................................... 100

Z180 Internal Input/Output Registers Addresses 00-3F ................100

Epson 72423 Timer Registers 0x41800x418F ............................ 102

Other Registers .............................................................................. 103

Interrupt Vectors ................................................................................104

Nonmaskable Interrupts ................................................................105

Jump Vectors .................................................................................105

Interrupt Priorities .........................................................................106

Appendix D: Serial Interface Board 107

Introduction........................................................................................108

External Dimensions ..........................................................................109

Appendix E: Backup Battery 111

Battery Life and Storage Conditions .................................................. 112

Replacing the Lithium Battery ........................................................... 112

Battery Cautions ................................................................................ 113

Index 115

All manuals and user guides at all-guides.com

all-guides.com

OP7100 About This Manual svii

ABOUT THIS MANUAL

This manual provides instructions for installing, testing, configuring, and

interconnecting the Z-World OP7100 touchscreen operator interface.

Instructions are also provided for using Dynamic C functions.

Assumptions

Assumptions are made regarding the user's knowledge and experience in

the following areas.

 Ability to design and engineer the target system that interfaces with the

OP7100.

 Understanding the basics of operating a software program and editing

files under Windows on a PC.

 Knowledge of the basics of C programming.

For a full treatment of C, refer to the following texts.

The C Programming Language by Kernighan and Ritchie

and/or

C: A Reference Manual by Harbison and Steel

 Knowledge of basic assembly language and architecture for the Z180

microprocessor.

For documentation from Zilog, refer to the following texts.

Z180 MPU User's Manual

Z180 Serial Communication Controllers

Z80 Microprocessor Family User's Manual

All manuals and user guides at all-guides.com

OP7100viii sAbout This Manual

Acronyms

Table 1 lists and defines the acronyms that may be used in this manual.

Icons

Table 2 displays and defines icons that may be used in this manual.

Table 1. Acronyms

Acronym Meaning

EPROM Erasable Programmable Read-Only Memory

EEPROM Electronically Erasable Programmable Read-Only Memory

LCD Liquid Crystal Display

LED Light-Emitting Diode

NMI Nonmaskable Interrupt

PIO Parallel Input/Output Circuit

(Individually Programmable Input/Output)

PRT Programmable Reload Timer

RAM Random Access Memory

RTC Real-Time Clock

SIB Serial Interface Board

SRAM Static Random Access Memory

UART Universal Asynchronous Receiver Transmitter

Table 2. Icons

Icon Meaning Icon Meaning

Refer to or see

!Note

(

Please contact 7L

Tip

Caution

High Voltage

Factory Default

All manuals and user guides at all-guides.com

OP7100 About This Manual six

Conventions

Table 3 lists and defines the typographical conventions that may be used in

this manual.

Pin Number 1

A black square indicates

pin 1 of all headers.

Measurements

All diagram and graphic measurements are in inches followed by millime-

ters enclosed in parenthesis.

Pin 1

Table 3. Typographical Conventions

Example Description

while Courier font (bold) indicates a program, a fragment of a

program, or a Dynamic C keyword or phrase.

// IN-01… Program comments are written in Courier font, plain face.

Italics Indicates that something should be typed instead of the

italicized words (e.g., in place of filename, type a file’s

name).

Edit Sans serif font (bold) signifies a menu or menu selection.

. . . An ellipsis indicates that (1) irrelevant program text is

omitted for brevity or that (2) preceding program text may

be repeated indefinitely.

[ ] Brackets in a C function’s definition or program segment

indicate that the enclosed directive is optional.

< > Angle brackets occasionally enclose classes of terms.

a | b | c A vertical bar indicates that a choice should be made from

among the items listed.

All manuals and user guides at all-guides.com

OP7100xsAbout This Manual

All manuals and user guides at all-guides.com

Altri manuali per OP7100

Altri manuali Z-World Monitor

Z-World

Z-World OP7100 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione