Zanussi Electrolux ZDF 121 Manuale utente

User

manual

Dishwasher

ZDF 121

156999 65/0en 17-03-2006 14:10 Pagina 1

Content

Safety information - - - - - - - - - - - - - - - - - -3

Control panel and functions - - - - - - - - - - -4

Programme table - - - - - - - - - - - - - - - - - - -5

efore the first use - - - - - - - - - - - - - - - - -6

Setting the water softener - - - - - - - - - - - - -6

Filling with dishwasher salt - - - - - - - - - - - -9

Filling with rinse aid - - - - - - - - - - - - - - - -10

Adjusting the dosage of rinse aid - - - - - - -10

Loading cutlery and dishes - - - - - - - - - - -11

Filling with detergent - - - - - - - - - - - - - - -13

Unloading the dishwasher - - - - - - - - - - - -13

Cleaning and care - - - - - - - - - - - - - - - - - 14

Environmental concerns - - - - - - - - - - - - - 15

Something not working- - - - - - - - - - - - - - 16

Technical data- - - - - - - - - - - - - - - - - - - - 18

Consumption values - - - - - - - - - - - - - - - 18

Hints for test institutes - - - - - - - - - - - - - - 19

Installation - - - - - - - - - - - - - - - - - - - - - - 20

Service and spare parts - - - - - - - - - - - - - 23

Guarantee conditions- - - - - - - - - - - - - - - 24

European guarantee - - - - - - - - - - - - - - - 25

156999 65/0en 17-03-2006 14:10 Pagina 2

Safety information

Correct use

●This dishwasher is only intended for washing

household utensils suitable for machine

washing.

●Do not put any solvents in the dishwasher.

This could cause an explosion.

●Knives and other items with sharp points

must be loaded in the cutlery basket with

their points down or placed in a horizontal

position in the upper basket.

●Only use products (detergent, salt and rinse

aid) suitable for dishwashers.

●Avoid opening the door whilst the appliance

is in operation, hot steam may escape.

●Do not take any dishes out of the dishwasher

before the end of the dishwashing cycle.

●After use, isolate the appliance from the

power supply and turn off the water supply.

●This product should be serviced only by an

authorised service engineer, and only

genuine spare parts should be used.

General safety

●Dishwasher detergents can cause chemical

burns to eyes, mouth and throat. Could

endanger life! Comply with the safety

instructions of the dishwasher detergent

manufacturer.

●The water in your dishwasher is not for

drinking. Detergent residues may still be

present in your machine.

●Ensure that the door of the dishwasher is

always closed when it is not being loaded or

unloaded. In this way you will avoid anybody

tripping over the open door and hurting

themselves.

●Do not sit or stand on the open door.

Child safety

●This appliance is designed to be operated by

adults. Don’t allow children to use the

dishwasher unsupervised.

●Keep all packaging well away from children.

There is risk of suffocation.

●Keep all detergents in a safe place out of

children’s reach.

●Keep children well away from the dishwasher

when the door is open.

Installation

●Check your dishwasher for any transport

damage. Never connect a damaged

machine. If your dishwasher is damaged

contact your supplier.

●All packaging must be removed before use.

●Any electrical and plumbing work required to

install this appliance must be carried out by

a qualified and competent person.

●For safety reasons it is dangerous to alter

the specifications or attempt to modify this

product in any way.

In the interest of your safety and to ensure the correct use, before installing and first using the

appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary

mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly

familiar with its operation and safety features. Save these instructions and make sure that they

remain with the appliance if it is moved or sold, so that everyone using it through its life will be

properly informed on appliance use and safety.

156999 65/0en 17-03-2006 14:10 Pagina 3

Control panel and functions

●Never use the dishwasher if the electrical

supply cable and water hoses are damaged;

or if the control panel, work top or plinth area

are damaged such that the inside of the

appliance is freely accessible. Contact your

local Service Force centre, in order to avoid

hazard.

●All sides of the dishwasher must never be

drilled to prevent damage to hydraulic and

electric components.

WARNING!

For electrical and water connection carefully

follow the instructions given in specific

paragraphs.

End of pro ramme light

Programme selector dial and On/Off switch

Programme guide

Start/Cancel button

Pro ramme selector

dial and On/Off switch

●when in this position, the machine is switched off (corresponding light off),

●when the marker on the dial corresponds with a programme, the machine

is switched on and a programme is selected (corresponding light on)

156999 65/0en 17-03-2006 14:10 Pagina 4

Start/Cancel

button

●Startin the washin pro ramme:

1. Select a washing programme.

2. Press the Start/Cancel button (corresponding light on).

IMPORTANT!

Once the programme has started, if you want to change the selection made

you must cancel the washing programme in progress.

●Cancel the washin pro ramme in pro ress:

1. Press and hold the Start/Cancel button until the corresponding light

turns off.

2. Release the Start/Cancel button.

3. Turn the programme selector dial to the Off position or select a new

washing programme (check that there is detergent in the detergent

dispenser.

End of pro ramme

light

Illuminates when the washing programme has ended. Switch off the

dishwasher by returning the programme selector dial to the Off position. The

On/Off indicator light turns off.

It also has added functions of visual signalling as:

- the setting of the water softener,

- intervention of an alarm due to the malfunction of the machine.

Pro ramme Use Cycle description

Pro ramme table

Rinse and Hold Any. Prewash

DPartial load (to be completed later in the

day). This programme does not require the

use of detergent.

30 min. Light soil. Main wash-

BCrockery and cutlery Final rinse

Normal 65° Normal soil. Prewash - Main wash

ACrockery and cutlery 2 intermediate rinses -

Final rinse - Dry

Eco 50° Normal soil. Prewash - Main wash

CCrockery and 1 intermediate rinse -

cutlery Final rinse - Dry

156999 65/0en 17-03-2006 14:10 Pagina 5

Before the first use

When usin separate special

(dishwasher) salt, rinse aid and

deter ent:

- set the water softener

- add special (dishwasher) salt

- fill up with rinse aid

When usin tablets that inte rate

rinse aid and deter ent:

there is no need to fill up with rinse aid

- set the water softener

- add special (dishwasher) salt

When usin tablets that inte rate

rinse aid, deter ent, salt function

and other additives:

there is no need to fill up with special salt or

rinse aid.

Check whether these detergents are suitable

for your water hardness. Follow the

manufacturers instructions.

- Set the water hardness to level 1.

IMPORTANT!

If the drying results are not satisfactory we

recommend that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosage to position 2.

If you decide in future to use separated

detergents, we advise that you:

- Fill up the salt and rinse aid container.

- Adjust the water hardness setting to the

highest level and perform 1 normal washing

programme without loading any dishes.

- Adjust the water hardness setting according

to the hardness of the water in your area.

- Adjust the rinse aid dosage

Settin the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and salts

from the water supply, which would have a

detrimental or adverse effect on the operation

of the appliance.

The softener should be adjusted according to

the hardness of the water in your area. Your

local Water Authority can advise you on the

hardness of the water in your area.

IMPORTANT!

The water softener must be set in both ways:

manually and electronically.

156999 65/0en 17-03-2006 14:10 Pagina 6

Water hardness Number of flashes of the Adjustment of the water

“end of pro ramme” li ht hardness settin

in Clarke1) in °TH2) in mmol/l3) manually electronically

64 - 88 91 - 125 9,0 - 12,5 10 2 level 10

53 - 63 76 - 90 7,6 - 8,9 9 2 level 9

46 - 52 65 - 75 6,5 - 7,5 8 2 level 8

36 - 45 51 - 64 5,1 - 6,4 7 2 level 7

28 - 35 40 - 50 4,0 - 5,0 6 2 level 6

18 - 22 26 - 32 2,6 - 3,2 4 1 level 4

5 - 12 7 - 18 0,7 - 1,8 2 1 level 2

23 - 27 33 - 39 3,3 - 3,9 5 2 level 5

13 - 17 19 - 25 1,9 - 2,5 3 1 level 3

< 5 < 7 < 0,7 1 1 level 1

no salt necessary

1) Clarke degree, measure of the water hardness.

2) (°TH) French degree, measure of the water hardness.

3) (mmol/l) millimol per litre, international unit for water hardness

The water softener is factory set at position 2.

Settin the water softener manually (see table)

Set switch to position 1

or 2

factory

setting

156999 65/0en 17-03-2006 14:10 Pagina 7

Settin the water softener electronically (see table)

The dishwasher must

be switched off Release the button. The

end of pro ramme

indicator light will flash.

The number of flashes

corresponds to current

level set.

The end of pro ramme

indicator light might

flash 5 times, for

example. The flashing is

repeated every 5

seconds.

To change the level,

press the start/cancel

button. Each time the

button is pressed the

level increases. (Level 1

follows level 10).

The end of pro ramme

indicator light indicates

the new setting.

To memorise the

operation, turn the

programme selector dial

to position off.

Press and hold the start/cancel button and turn the

programme selector dial clockwise till the first

programme. Keep the button pressed until the

programme selector indicator light and the

start/cancel indicator light start flashing.

The water softener is factory set at position 5.

156999 65/0en 17-03-2006 14:10 Pagina 8

Fillin with dishwasher salt

Unscrew the cap. Only before fillin with

salt for the first time,

fill the salt container

with water

Using the funnel

provided, pour in the

salt until the container is

filled with salt.

Remove any trace of

salt. Replace the cap tightly

turning it clockwise until

it stops with a click.

CAUTION!

Use only special salt suitable for dishwashers

IMPORTANT!

Immediately start a complete programme.

The salt cap has a refill indicator window in the

centre in which a reen float is clearly visible when

there is salt inside the container and almost

disappears when the salt has finished.

IMPORTANT!

The salt container will require topping up

periodically.

IMPORTANT!

Water will overflow from the container as salt is

added.

156999 65/0en 17-03-2006 14:10 Pagina 9

Fillin with rinse aid

Open the lid. Fill up with rinse aid.

The maximum level for

filling is indicated by

"max".

Clean up any rinse aid

which overflows. Close

the lid and press until it

locks.

CAUTION!

Never fill the rinse aid dispenser with any other

substances (e.g. dishwasher cleaning agent, liquid

detergent). This would damage the appliance.

Adjustin the dosa e of rinse aid

Increase the dose if there are drops of water or

lime spots on the dishes after washing. Reduce the dose if there are whitish streaks

on the dishes or a bluish film on glassware or

knife blades.

Open the lid. Set the dosage level.

(The dose is factory set

in position 4).

Close the lid and press

until it locks.

Top up the rinse aid

when the indicator (B)

becomes clear.

156999 65/0en 17-03-2006 14:10 Pagina 10

Altri manuali per ZDF 121

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Zanussi Electrolux Lavastoviglie

Zanussi Electrolux

Zanussi Electrolux DA 6142 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 6126 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 4111 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDT 6053 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 6066 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DX 6452 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 2400 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DCS 12 W Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDF 501 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 4143 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DA 6153 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 4126 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DEF201 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDS 231 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDF 301 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDF 121 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DX 6451 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 6280 Manuale operativo

Zanussi Electrolux

Zanussi Electrolux ZDF 601 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 6128 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZDF 501 Manuale utente

Zanussi Electrolux

Zanussi Electrolux DA4442 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZSF 4123 S Manuale utente

Zanussi Electrolux

Zanussi Electrolux DE 6754 Manuale utente

Manuali Lavastoviglie popolari di altre marche

Electrolux

Electrolux ESI5211LOX Manuale utente

KitchenAid

KitchenAid KUDB230B Manuale utente

Brandt

Brandt BDJ424DB Manuale utente

Asko

Asko DSD767UXXL.AU Manuale utente

Beko

Beko DFN26210W Manuale utente

NEFF

NEFF S153ITX00E Scheda tecnica

Midea

Midea SV 4.45 wi Manuale utente

LG LDF7932 Manuale utente

Gorenje

Gorenje GV63214 Manuale utente

Hotpoint

Hotpoint HDA1100ZWH Manuale di servizio

Blomberg

Blomberg LDFN2240W Manuale utente

AEG

AEG FFB83836PM Manuale utente

Cylinda

Cylinda DM3220RFD Manuale utente

Atag

Atag DW8214MB Manuale utente

GE GLD8000 Series Manuale utente

Siemens

Siemens SN23HI02KE Scheda tecnica

Omega

Omega ODW717X Manuale utente

BORETTI

BORETTI BVW-683 Manuale utente