Zanussi Electrolux ZWT6021 Manuale utente

User manual

ZWT 6021

Washing machine

We were thinking of you

when we made this product

Welcome to the world of Electrolux

Thank you for choosing a first class

product from Electrolux, which hopefully

will provide you with lots of pleasure in

the future. The Electrolux ambition is to

offer a wide variety of quality products

that make your life more comfortable.

You find some examples on the cover in

this manual. Please take a few minutes

to study this manual so that you can

take advantage of the benefits of your

new machine. We promise that it will

provide a superior User Experience

delivering Ease-of-Mind. Good luck !

4contents

Contents

Warnings ........................................... 5

Description of the appliance .............. 7

How to run a wash cycle ? ................ 8

Washing guide ................................ 12

Programmes table ........................... 14

Consumption .................................. 15

Care and cleaning ........................... 16

Operating problems ........................ 17

Technical specifications ................... 20

Installation ....................................... 20

Environment .................................... 23

The following symbols have been used

in this user guide :

Important information about con-

cerning your safety and informa-

tion on how to avoid damaging

the appliance.

General information.

Information concerning the envi-

ronment.

warnings 5

Warnings

These warnings are for the safety of

you and others around you.

Please read these points carefully

before installing and using your ap-

pliance. Thank you for your atten-

tion.

Keep this user manual with your ap-

pliance. If the appliance is sold or gi-

ven to another person, please make

sure this user manual is included.

This way, the new user will have the

relevant operating instructions and

warnings.

General safety

• Do not modify or attempt to modify

this appliance. This would put your-

self in danger.

• Ensure that all coins, safety pins,

brooches, screws etc have been

removed before starting a washing

programme. If left in washing, they

can seriously damage the appliance.

• Use the amount of detergent recom-

mended in the paragraph “Using the

right amount of detergent”.

• Put small items together (socks, belts

etc.) in a small linen bag or pillow

case.

• Unplug and close inlet hose tap after

using appliance.

• Always disconnect the power supply

from the appliance before cleaning or

maintenance.

• Do not machine wash clothes with

ribbing, unfinished or torn material.

Installation

• Unpack or ask for the appliance to

be unpacked immediately upon deli-

very. Check the outside of the

appliance is not damaged in any way.

Report all transit damage to your

retailer.

• Remove all transit bolts and packa-

ging before installing the appliance.

• Connection to the water supply must

be carried out by a qualified plumber.

• If your domestic electrical circuit

needs adapting to allow the

appliance to be plugged in, use a

qualified electrician.

• Ensure that, after installation, the

power cable is not trapped under the

appliance.

• If the appliance is installed on carpe-

ted floor, ensure that the carpet does

not obstruct any ventilation ducts

located at the base of the appliance.

• The appliance must be equipped

with an earthed power plug which

conforms to regulations.

• Before connecting your appliance to

the power supply, carefully read the

instructions in the chapter entitled

“Electrical connection”.

• Replacing the power cable should

only be carried out by an authorised

service engineer.

• The manufacturer cannot be held

responsible for any damage resulting

from incorrect installation.

6warnings

Precautions to be taken against

frost

If your appliance is exposed to tempera-

tures below 0°C, the following precau-

tions must be taken :

• Close the tap and disconnect the

inlet hose.

• Place the end of this hose and the

drain hose in a basin on the floor.

• Select the Drain programme let it run

until the end of the cycle.

• Disconnect the appliance from the

power supply by turning the program

selector to “Stop”.

• Unplug the appliance.

• Replace the inlet hose and drain

hose.

This way, the water remaining in the ho-

ses will be drained away, avoiding any

ice formation which would damage your

appliance.

Before turning your appliance on again,

ensure that it is installed in an area whe-

re the temperature will not fall below

freezing.

Use

• Your appliance is intended for normal

domestic use. Do not use the

appliance for commercial or industrial

purposes or for any other purpose.

• Refer to the instructions on the label

of each item before washing.

• Do not put items into the washing

machine which have had stains

removed with petrol, alcohol, trichlo-

rethylen etc. If such stain removers

have been used, wait until the pro-

duct has evaporated before putting

these items into the drum.

• Your appliance has been designed

for use by adults. Ensure children do

not tamper or play with it.

description of the appliance 7

Description of the appliance

The control panel

Lid handle

Adjustable levelling feet

Dispenser box

Prewash

Wash

Softener (do not fill above the MAX

symbol )

The control panel

Programme selector

“Spin” pushbutton

“Option” pushbutton

“Extra rinse” pushbutton

Lights of cycle progress

“Start/Pause” pushbutton

“Delay start” pushbutton

1762 5

3 4

8how to run a wash cycle

How to run a wash cycle?

Using for the first time

• Ensure the electrical and water con-

nections comply with the installation

instructions.

• Remove the polystyrene insert and

all other items inside the drum.

• Run an initial wash cycle at 90°C,

without any washing but with deter-

gent to clean the water tank.

Daily use

Loading washing

• Open the lid of the appliance.

• Open the drum by depressing the loc-

king button A : The two shutters

unlock automatically.

• Load the washing, close the drum

and the lid of your washing machine.

Before closing the lid of your appliance,

ensure that the drum is properly closed :

• When the two shutters are closed,

• locking button A released.

Proportioning of detergents

Your washing machine has been desi-

gned to reduce your water and deter-

gent consumption. You can therefore

reduce the amounts recommended by

detergent manufacturers.

Pour the amount of washing powder into

the washing and prewash com-

partments if you have selected the

“prewash” option. Pour fabric softener

into the compartment if necessary .

If you use another detergent type, refer

to the section “detergents and

additives” in the washing guide.

Selection of desired programme

You can find the right programme for

different types of washing in the

programme table (see “Programme

table”).

Turn the programme selector to the

required programme. The “Start/Pause”

pushbutton flashes green.

If you turn the programme selector to

another programme while a cycle is in

progress, the appliance will ignore the

new selected programme. The “Start/

Pause” pushbutton flashes red for a few

seconds.

how to run a wash cycle 9

Selecting the spin speed

Press the “Spin” pushbut-

ton to change the spin

speed, if you want your

washing to be spun at a dif-

ferent speed to the one se-

lected by the appliance. You

can also select “No spin”*,

“Rinse hold” *or “Night si-

lence plus”*.

The maximum speed is 600 rpm for all

the programmes.

At the end of the programme, if you have

selected “Rinse hold” or “Night silen-

ce plus”, you then need to select a

“Spin” or “Drain” programme to fi-

nish the cycle.

“Rinse hold”

The washing machine will not drain the

water from the last rinse, so will not

crease the laundry.

Selecting options

You must select the

different options after

selecting the pro-

gramme and before

pressing the “Start/

Pause” pushbutton

(see “Programme table”). Press the de-

sired button(s) ; the corresponding lights

come on. If pressed again, the lights go

out. If one of the options is not compati-

ble with the selected programme, the

“Start/Pause” pushbutton flashes red.

“Prewash” option

The appliance runs a prewash at 30°C

max. The prewash finishes with a short

spin cycle for cotton or synthetic pro-

grammes, and with an empty cycle for

delicates programmes.

“Light/Super quick” option

The cycle can be made longer or shorter

by pressing the “Option” pushbutton to

choose “Light” or “Super quick”. By de-

fault, all indicators are switched off.

Light : Lightly soiled laundry

Super quick : Very lightly soiled laundry

or half load

The availability of these different levels

varies depending on the selected pro-

gramme type.

“Extra rinse” option

The washing machine will add one or

more rinses during the cycle.

This option is recommended for people

with sensitive skin and in soft water

areas.

• Temporary :

Press the “Extra rinse” pushbutton .

The option is only active for the selected

programme.

• Permanent :

Hold down the “Spin” and “Option”

pushbuttons for a few seconds. The op-

tion is permanently activated, even if the

appliance is switched off.

To deactivate it, repeat the process.

*depending on model

10 how to run a wash cycle

“Delay start”

This option allows you to delay the start

of a wash programme by 3, 6 or 9 hours

by pressing the “Delay start”

pushbutton.

You can change or cancel the delayed

start time at any time before you press

the “Start/Pause” pushbutton, by pres-

sing the “Delay start” pushbutton again

(when all indicators are off, the wash

programme will start immediately).

If you have already pressed the “Start/

Pause” pushbutton and you want to

change or cancel the delayed start, pro-

ceed as follows :

• To cancel the delayed start and start

the cycle immediately, press “Start/Pau-

se” and then “Delay start”. Press “Start/

Pause” to start the cycle.

• To change the timer delay period, you

must go through the “Off”

position

and reprogram your cycle.

The lid will be locked during the delayed

start time. If you need to open it, you

must first pause the appliance by pres-

sing the “Start/Pause” pushbutton. After

closing the lid again, press the “Start/

Pause” pushbutton.

Start of the programme

Press the “Start/Pause”

pushbutton to start the

cycle ; the corresponding

light will come on green.

It is normal for the programme selector

to remain stationary during the cycle.

The light corresponding

to the current cycle is

illuminated.

: Prewash + Wash

: Rinse + Spin

: End

Interrupting a programme

Adding washing during the first 10

minutes

Press the “Start/Pause” pushbutton :

the corresponding light will flash green

while the appliance is paused. The lid

can only be opened around 2 minutes

after the washing machine has come to

a stop. Press the “Start/Pause” pus-

hbutton again to continue the program-

me.

Modifying the programme in pro-

gress

Before making any changes to the cur-

rent programme, you need to pause the

washing machine by pressing the “Start/

Pause” pushbutton. If the modification is

not possible, the “Start/Pause” pus-

hbutton flashes red for a few seconds. If

you still decide to change the program-

me, you must cancel the current pro-

gramme (see below).

Cancelling the programme

If you want to cancel the programme,

turn the programme selector to the “Off”

position.

Indice

Altri manuali Zanussi Electrolux Rondella

Zanussi Electrolux

Zanussi Electrolux ZWF 14109 Manuale utente

Zanussi Electrolux

Zanussi Electrolux FD 1026 Manuale utente

Zanussi Electrolux

Zanussi Electrolux F1003W Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWV 1651S Manuale utente

Zanussi Electrolux

Zanussi Electrolux FC 1200W Manuale utente

Zanussi Electrolux

Zanussi Electrolux FA4412 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF 1012 W Manuale utente

Zanussi Electrolux

Zanussi Electrolux FA5423 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF 1651W Manuale utente

Zanussi Electrolux

Zanussi Electrolux ELECTROLUX ZWT 10120 Manuale utente

Zanussi Electrolux

Zanussi Electrolux FXC 1206 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF1421W Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWA 385 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF 1020W Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF1421W Manuale utente

Zanussi Electrolux

Zanussi Electrolux FAE 1026 V Manuale utente

Zanussi Electrolux

Zanussi Electrolux U31302 ZWF 16581 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWC 1300W Manuale utente

Zanussi Electrolux

Zanussi Electrolux FA 8432 Manuale utente

Zanussi Electrolux

Zanussi Electrolux FBU55 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWA 3100 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWF 1630 W Manuale utente

Zanussi Electrolux

Zanussi Electrolux F855 Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZWA 5120 Manuale utente

Manuali Rondella popolari di altre marche

Tricity Bendix

Tricity Bendix AW 1000 W Guida del prodotto

Panasonic

Panasonic NA-F60L5WRB Manuale utente

GE WSLP1500 Manuale

Electrolux

Electrolux EWF1284EDW Manuale utente

Bosch

Bosch WAN2829BSN Manuale utente

LG TV2516DV3B Manuale utente

LG TH2517DSAV Manuale utente

VESTEL

VESTEL CMH-XL 7510 TE Manuale utente

AEG

AEG 74335 Manuale operativo

Johnson

Johnson JWF721A Manuale utente

Beko

Beko WTE7604XLW0 Manuale utente

Danby

Danby DTT100A1WDB Istruzioni per il montaggio

Amica

Amica WA 14 Ex Manuale utente

Daewoo

Daewoo DWD-F1222 Manuale utente

Bosch

Bosch WAS28461AU Manuale utente

Miele

Miele PW 6080 Vario Manuale utente

Finlux

Finlux FLX108CF220 Manuale utente

Whirlpool

Whirlpool 3LBR5132AN0 Manuale utente