Zebex Z-1060 Manuale utente

No warranty of any kind is made in regard to this material,

including, but not limited to, implied warranties of merchantabil-

ity or fitness for a particular purpose. Although every effort is

made to assure accuracy and completeness, we can not be

held liable for any errors contained herein nor incidental or con-

sequential damages in connection with furnishing, performance

or use of this material.

We shall be under no liability in respect of any defect arising

from fair wear and tear, wilful damage, negligence, abnormal

working conditions, failure to follow the instructions and warn-

ings, or misuse or alteration or repair of the products without

written approval.

No part of this document may be reproduced, transmitted,

stored in a retrieval system, transcribed, or translated into any

language or computer language in any form or by any means

electronic, mechanical, magnetic, optical, chemical, psithonic,

manual or otherwise, without express written consent and

authorization.

We reserve the right to make changes in product design

without reservation and without notification. The material in this

guide is for information only and is subject to change without

notice.

All trademarks mentioned herein, registered or otherwise,

are the properties of their various respective owners.

iii

Table of Contents

Unpacking............................................................. 1

Finding Your Way Around .................................... 2

Battery Care ......................................................... 2

Installing Batteries ................................... 4

Charging Batteries................................... 5

Getting Started ..................................................... 7

Scanning and Storing Data................................... 7

Uploading Data to a PC...................................... 10

Uploading Data with WinTaskGen...................... 12

Uploading Data with HyperTerminal................... 14

Setup .................................................................. 15

LCD Contrast......................................... 16

Beep Volume ......................................... 16

System Timer ........................................ 17

Barcode Setup....................................... 19

Specifications ..................................................... 20

DIMENSIONS........................................ 22

Congratulations on your purchase of the super compact

Mini Personal Data Collector (PDC) with LCD display.

Along with superior portability and visually safe scanning

LEDs, the PDC features a real-time clock, a buzzer, a

dual-color status LED, and a UART port for direct con-

nection to external equipment.

The on-board 32K EEPROM provides a robust, stable,

programmable memory space. Some of this non-volatile

memory is dedicated to storing scanned data. The PDC

can retain more than 1000 records.

The Mini Personal Data Collector comes already pro-

grammed with a basic data collection program, called

FREETASK, that can scan and store barcodes, and do

simple edits on the stored data. Data can be uploaded to

a PC through the RS-232 link cable.

WinTaskGen, a program on the included CD-ROM, can

be used to create data collection programs (Tasks) for

download and use with the PDC. A Task can have up to

four data forms with up to 16 separate data fields per

form.

For more advanced requirements, there are two libraries

for developing programs under the Keil C environment:

one is the hardware library (Z1060Lib.LIB), the other is a

compressed database system (DBLite60). Contact your

agent if you are interested in this approach.

Unpacking

The PDC package should contain:

1 ea. Mini Personal Data Collector

1 ea. DB-9(F) serial

Communication Cable

4 ea.

VARTA 1/V40H NiMH

rechargeable batteries

1 ea Power Adapter

1 ea. CD-ROM support disk

1 ea. User’s Manual (this book)

If any package contents are damaged or missing, please

contact your dealer immediately.

Finding Your Way Around

Figure 1: The Mini Personal Data Collector

Battery Care

In the interests of providing the best product perfor-

mance possible, the Mini Personal Data Collector comes

with high quality, rechargeable Nickel Metal Hydride

(NiMH) batteries and a Power Adapter. After NiMH bat-

teries are installed, connect the Power Adapter cable

and the batteries charge right in the unit.

Before you use new NiMH batteries for the first time you

should charge them fully. Please note that new NiMH

LED lamp

scan window

LCD screen

UP key

SCAN key

RS-232 port

DOWN key

FUNCTION

key

batteries need to go through three to five charge-dis-

charge cycles before they reach peak performance and

capacity. The first several times that you use new NiMH

batteries you may find that they discharge fairly quickly

during use. This is normal until the batteries mature.

It is highly recommended that NiMH batteries always be

operated until fully discharged before recharging. If you

recharge NiMH batteries before they are fully dis-

charged, they may develop a pattern of inhibited output.

Under favorable conditions, NiMH batteries can last

through hundreds of recharges. You will get better per-

formance if you keep battery teams together. Don’t mix

new and old batteries.

Note: If the PDC will remain unused for an extended

period (two months or more) the batteries should

be removed. Even when the PDC is turned off,

there is a very small amount of power consumed,

which can, over time, have a bad effect on batter-

ies.

Installing Batteries

Figure 2: Inserting Batteries

1. Loosen the battery cover screw and remove the

cover.

2. Insert four batteries according to the orientation in

the picture: two with positive side up on the left, two

with negative side up on the right.

3. Replace the cover and tighten the screw.

battery

cover

screw

Charging Batteries

Warning! Use the Power Adapter with NiMH

batteries ONLY! Connecting the Power

Adapter with any other type of batteries in the

PDC voids the warranty, ruins batteries, can

burn up the Mini Personal Data Collector, and could pos-

sibly cause harm to persons or property!

You may use regular disposable alkaline cells to operate

the PDC, but never mix NiMH with alkaline batteries, and

never, never connect the Power Adapter when there are

disposable (alkaline) batteries in the unit.

To charge NiMH batteries:

1. With NiMH rechargeable batteries (ONLY!) in the

PDC unit, plug the Power Adapter connector into the

socket on the side of the large end connector of the

Communication Cable.

2. Plug the Power Adapter into an outlet. While charg-

ing, the LED on the PDC lights up red. The LED

turns off when the batteries are fully charged.

Charging takes 4 to 6 hours.

Figure 3: Connecting the Power Adapter

It is normal for the Power Adapter and the NiMH battery

cells themselves to become warm during charging.

Note:

If needed when NiMH batteries are low, the PDC

may be operated with the Power Adapter con-

nected. Never use the Power Adapter with any

other type of batteries in the PDC unit!

Indice

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente