Zeegma Sap Manuale utente

Sap

EN DE PL IT FR

ES NL UK LT HR

User manual

Bedienungsanleitung

Instrukcja obsługi

Manuale d’uso

Manuel de l’Ulisateur

Manual de usuario

Handleiding

Посібник користувача

Vartotojo vadovas

Korisnički priručnik

EN Introducon

Dear customer!

Thank you for placing trust in us and choosing Zeegma.

We provide you with a product perfect for everyday use thanks to the use of

high-quality materials and modern soluons.

We are convinced that the product will sasfy your requirements as it has

been designed with utmost care.

Before you use the product, please read this manual carefully.

Should you have any remarks or quesons concerning the product, please do

not hesitate to contact us:

[email protected]

Important

Please read this manual before you start using the product to see its funcons

and use them in accordance with intended use.

• Keep this manual for future reference.

• Appliances can be used by persons with reduced physical, sensory or mental

capabilies or lack of experience and knowledge if they have been given

supervision or instrucon concerning use of the appliance in a safe way and if

they understand the hazards involved.

• Children must not play with this appliance.

• Do not use the product for more than 20 minutes. If you do so, leave the

appliance for 5 minutes unl it cools down and then use again.

• Keep the product out of reach of children to limit the suocaon risk or electric

shock risk.

• Do not repair the product on your own (does not apply to suggeson in

the chapter: Troubleshoong). If the appliance malfuncons, contact the

manufacturer’s authorized service center.

• Do not wash the motor under running water and do not immerse it in water to

avoid electric shock.

If:

•the product or any of its parts is overheated,

•the feeder cable smells like burning or vibrates irregularly,

•the tank or any other item is broken,

•the appliance acts up,

please unplug the product and contact the authorized service center.

• Do not pull the feeder cable rapidly and remember to dust it.

• To unplug the product, pull a plug instead of a cable.

• If the product is inac ve, unplug it.

• Do not use the appliance if the feeder cable or plug are damaged.

• Do not wrap the feeder cable around the product.

• Do not keep the appliance and its feeder cable near  re or sources of heat.

• The feeder cable plug must be inserted into the socket properly; otherwise it

may lead to  re.

• Do not use parameters other than 220-240 V~ 50-60 Hz to power the device.

• During opera on do not place such items as teaspoons, s cks, cleaning brushes

in the tank. Do not put  ngers in either.

• The appliance must be stored on a stable and horizontal surface.

• Do not use the appliance if it stands on an unstable surface.

• Do not use the appliance near furniture or walls as the product may make

them dirty.

• When assembling accessories, the product must be inac ve.

• Do not use the product to crush hard fruits or vegetables.

• Do not use the product if there are no fruits or vegetables inside.

• Do not open the product cover when it operates.

• None of the product components must be used in the microwave.

• Do not expose the product to sunlight because it may fade.

• Use the components supplied only.

• If you want to move the appliance, unplug it and remove the tank.

• Always disconnect the appliance from the supply if it is le una ended and

before assembling, disassembling or cleaning.

How to move the product properly:

EN Descripon

8 9

1. Pushrod

2. Feeder with cover

3. Auger

4. Sieve x3

5. Tank with pulp and juice outlets

6. Base with motor

7. Feeder cable

8. Reverse gear switch

9. Regular gear switch

10. O switch

11. Cleaning brush

12. Tank x2

13. Non-drip plug

How to assemble the appliance

Assemble the appliance on a at and stable surface. The appliance must not be

plugged in when you assemble it.

1. Place a rubber gasket in the pulp outlet (correct inlet marked with line).

2. If you have diculty with inserng the valve, you can wet it with a lile

amount of water.

Pulp outlet

Rubber gasket

(not xed)

Pulp outlet

Rubber gasket

(xed properly)

Note! Before every use, make sure the rubber valve has been xed properly.

3. Place the tank on metal groove which stands out of the juicer base.

Tank

Metal groove

Juicer base

Make sure the tank has been xed on the groove properly

(push unl it resists)

EN 4. Insert the auger in the tank (push un l it resists).

If there are any di cul es, wet the auger with a li le amount of water.

If you fail to install the appliance properly, the juice will leak. Also, the feeder

with cover will not be closed properly.

Note! Never put the hand inside the tank when the appliance works!

5. Place the feeder with cover on the tank. Next slide the cover in a clockwise

direc on un l it engages in the groove on the handle.

Groove on handle

Cover on the tank Cover  xed properly

How to disassemble the appliance

To disassemble the appliance, follow the steps presented in the assembly

manual in a reversed order.

If you have diculty in pulling the auger out of the tan:

Boom of the tank

1. Remove the tank from the juicer base.

2. Remove the cover.

3. Push the auger metal rod from the boom.

How to use

Sap slow juicer is equipped with a revoluonary mechanism thanks to which

you can have fresh juice by squeezing fruits and vegetables rather than

grinding them. When compared to a tradional juice extractor, Sap relies on

low-speed squeezing which lets the juice retain natural color, natural avor as

well as nutrients and vitamins.

The juicer separates the juice from pulp with two dierent outlets and

guarantees high-purity juice. The machine is able to extract juice from celery,

spinachs, carrots, apples, bananas, tomatoes, cucumbers, pears, oranges and

other similar fruits or vegetables.

The pushrod serves to cram leaf ingredients into the tank.

• The product is not intended for starchy fruits and vegetables. Do not

squeeze sugar cane, persimmon and other too hard products in the

appliance.

• Do not put a few items at a me into the tank as you may clog it.

• You can put fruits with small seeds (e.g. apples, grapes, watermelon) inside

the juicer. Do not place fruits and vegetables if their seeds are large (e.g.

peach, avocado). These stones must be removed beforehand.

EN • Boiled soya pulp may be more di cult to remove than other pulps.

• Some fruits and vegetables may leave traces of pulp in the juice.

• In case of any doubts, follow the instruc ons.

1. Check all components of the set.

Make sure they have been assembled

in accordance with the manual.

2. Place the tank under the pulp and

juice outlets.

3. Lift the non-drip plug at the juice

outlet.

4. Plug the product in.

Put ingredients into the juicer slowly.

If necessary, use a pushrod.

To switch the appliance on, slide the

switch into „STA.

If ingredients get stuck in the tank, slide

the switch into „REV” for a few seconds.

By doing so, you ac vate reverse rota on.

A er a while return to original model: slide

the switch into „STA”.

To stop the squeezing process, slide the

switch into „O”.

Ifpulpdoesnotcomeout,stoptheappliance

and clean it with a brush supplied.

Once the operaon is nished, unplug the appliance.

Tips:

• When extracng the leaf juice (e.g. spinach), the product may be louder, it

is natural.

• Thequalityandlooksofthejuicedependsonhowfreshfruitsandvegetables

are.

• Some fruits and vegetables may leave more pulp in the juice than others. If

necessary, lter such juice before you drink it.

• Carrot juice may contain less water and more deposits.

• If you put too many ingredients into the juicer, the tank may clog.

• If you can noce that the tank is clogged and juice does not come out –

remove some ingredients.

• If you prepare juice of several dierent ingredients, change the order of

ingredients added.

• If one of the ingredients are leaves, place them into the product along with

other fruit to increase squeezing eciency.

• Be careful when squeezing hard fruits and vegetables (e.g. carrots). The

appliance is likely to overheat quicker.

Troubleshoong

Problem Check Soluon

The juicer does not work

Has the feeder cable

been plugged in?

Check if the feeder

cable is connected to the

socket 220-240 V

~ 50-60 Hz.

Has the juicer been

assembled properly?

Assemble the product

in accordance with the

manual.

Has the ON switch been

set properly?

To switch the appliance

on, slide the switch into

„STA”.

Has the appliance been

used for more than 20

minutes?

Switch the product o.

Wait for a while and start

it again. If you want to

use the appliance for

another period of 20

minutes, the product

needs to cool down for

one hour.

EN Problem Check Soluon

Juice includes pulp or

juice comes out of the

pulp outlet

Has the rubber gasket

been xed properly?

Fix or adjust the rubber

gasket as presented in

the manual.

Have you used fresh

fruits or vegetables?

Overripe fruits or

vegetables contain less

water and may clog the

juicer mechanism. If you

want to use overripe

fruits, at rst immerse

them in mineral water for

at least 10 minutes.

Have you put too many

products at a me into

the juicer?

Slide the switch into

reverse rotaon mode

(REV), aer a few

seconds stop the product

and set the regular mode

(STA).

The juicer stops when

working

Have you put fruits/

vegetables into the juicer

„by force”?

Remove some fruits or

vegetables.

Have you put fruits/

vegetables with hard

stones into the juicer?

Switch into reverse

rotaon mode (REV),

aer a few seconds stop

the appliance and set

regular mode (STA).

Pulp is too wet Is the sieve clogged?

Check the auger

mechanism for excess of

pulp. Clean it up.

Motor is too loud or

vibrates

Have all components of

the set been assembled

properly?

If the product has been

assembled properly, the

appliance may be louder

when squeezing overripe

fruits and vegetables.

The tank vibrates during

operaon

It is a regular operaon of the product. The motor sets

the tank in moon.

Indice

Lingue:

Altri manuali Zeegma Spremiagrumi

Zeegma

Zeegma Sap Pro Manuale utente

Manuali Spremiagrumi popolari di altre marche

GE 169201 Manuale utente

Exquisit

Exquisit ZP 3001 WET Manuale utente

Philips

Philips HR1851 Manuale utente

Sam Cook

Sam Cook MASTERCHEF EXECUTIVE PSC-50 Manuale utente

Termozeta

Termozeta spremiagrumi Manuale utente

ElectrIQ

ElectrIQ WF1000 Manuale utente

Bella

Bella WHOLE FRUIT JUICER Manuale utente

HAEGER

HAEGER Little Juice CJ-025 006A Manuale utente

Havells

Havells Fusion Manuale utente

Siemens

Siemens MK554 SERIES Manuale utente

Beper

Beper 90.302B Guida rapida

NATURSAFT

NATURSAFT 015.401.3 Manuale utente

Moulinex

Moulinex BKB 2 Manuale utente

Royal Catering

Royal Catering RCJU-01 Manuale utente

camry

camry CR 4002 Manuale utente

AIGOSTAR

AIGOSTAR 30HIM Manuale utente

ZUMEX

ZUMEX MINEX Manuale utente

Skymsen

Skymsen EX Manuale utente