Safety measures 14-Function Foot Control Panel, Wired or Wireless
Version 6.1
Page 8 G-30-1706-en
–at a distance of less than 25 cm from flammable anesthetics or volatile
solvents such as alcohol, benzine or similar substances.
•If you notice any smoke, sparks or unusual noise, switch off the connected
foot control panel and remove the batteries. In this case, do not use the
foot control panel again before it has been repaired by our Service
department.
•Never use force when trying to connect any electrical connectors (plugs,
sockets). If the connection cannot be made easily, check whether the plug
fits the socket. If any of the connectors are damaged, label the foot
control panel as not suitable for operation. Refrain from any further use
and arrange for it to be repaired by our Service department.
•Over long distances (e.g. relocation, return for repair, etc.), the foot
control panel must always be transported in the original packaging or in
special return packaging. Please contact your dealer or ZEISS Service for
this purpose.
•Use the foot control panel for the described intended purpose only.
•Operate the foot control panel only with the components included in the
delivery package. If you wish to use other components, check beforehand
that the safe use of these components has been documented and
confirmed by ZEISS or the manufacturer of the components.
•If a failure occurs which cannot be fixed using the information provided in
the section entitled "What to do in the event of malfunctions", attach a
sign to the foot control panel stating that it is out of order and contact
ZEISS Service.
•The foot control panel may not be modified without the manufacturer’s
approval.
•The foot control panel is a high-grade technical product. To ensure
optimum performance and safe functioning, we recommend having it
checked by our service representatives or qualified specialist staff as part
of a regular scheduled maintenance program.
Information on exposure to radio frequency radiation in accordance
with FCC regulations
The emitted output power of the component is far below the FCC limit values
for radio frequency exposure. Nevertheless, the component should be used in
such a way that potential contact with persons during normal operation is
kept to a minimum.
NOTE! Classification for Canada
This Class B digital component complies with Canadian standard ICES-003.
