Safety measures S88 / OPMI Lumera T
Version 8.0
Page 10 G-30-1682-en
Notes for the operator
The correct use of the device is absolutely vital for safe operation. Therefore,
please thoroughly familiarize yourself with the content of these Instructions
for Use before starting up the system. Please comply with the Instructions for
Use of the other system components as well. You can obtain additional
information from ZEISS Service.
•Only operate the device within the scope of its intended use.
•The device may be operated only by properly instructed and trained
persons.
It is the responsibility of the customer or institution operating the
equipment to train and instruct all staff using the equipment.
•Keep the Instructions for Use available at all times for the operating
personnel.
•Note the symbols and labels attached to the device! (See page 36).
•Use only original accessories approved by ZEISS.
Legal regulations • Check regularly that the legal regulations applicable in your country with
regard to accident prevention and work safety are being complied with.
•This device must not be modified without the manufacturer’s approval.
If the system is modified after consultation with the manufacturer,
suitable inspections and testing must be completed to ensure subsequent
safe use.
The manufacturer is not liable for damage caused by an unauthorized
modifications to the device. Furthermore, such unauthorized modifications
will render the warranty and any claims under warranty invalid.
•If required by the applicable national laws and regulations, connect the
device to the special "equivalent power supply".
Ambient conditions • Do not use the power-operated devices included in the delivery package
– in areas where there is a risk of explosion,
– or at a distance of less than 25 cm from flammable anesthetics or
volatile solvents such as alcohol, benzine or similar substances.
•Do not use or store the device in damp rooms. Do not expose the system
to dripping water, running water, gushing water, sprayed water or splashes.
