Zeliox ZEL16-1,2-EU Guida
User & Installation
Manual
Zeliox Compact
ENGLISH
2
Table of contents
1. Operation 7
2. Main menu 9
3. Engine run signal 11
4. Settings Menu 13
5. Operating conditions 15
6. 12V charger 17
7. Battery 18
8. Sensors 21
9. Potective devices 22
10. Safety 23
11. Trouble shooting 24
1. Installation 26
2. Rear connections 27
3. Engine run signal 30
4. APPENDIX II - MSDS - (Material Safety Data Sheet) 32
5. Glossary and abbreviations 39
6. Technical Information 40
7. Error Zeliox Compact 42
User Manual
Installation Manual
Information contained in this document may be changed without prior notice.
3
Introduction
This manual includes both a user and installation guide
Denition
Welcome to the world of Excessive Power: Zeliox Compact.
The Zeliox Compact is a battery powered mobile power converter designed for
use in vehicles, vessels, tiny houses etc. The inverter supplies different output
voltages, 5V, 12V and 230V. The Zeliox Compact functions are highly reliable and
quiet, without the emission of harmful substances.
Zeliox Compact types:
This user manual is for the Zeliox Compact:
Zeliox Compact
ZEL16-1,20-EU 1600Watt – 1.2kWh - shore power
Dimensions and weight
Dimensions 420 x 190 x 370 mm (l x h x d)
Weight ZEL16-1,20-EU 23 Kg
ZEL16-1.20-EV 22 Kg
Product identication
Zeliox Compact - lithium-ion battery powered inverter
Product Identication Number (PIN)
Unique serial number on the side, in the format: ZC-XX-XXXX
(for example , “ZC-20-0001”)
Initial supplier identier
Zeliox BV
Spaarpot 13,
5667 KV, Geldrop
www.zeliox.com
Telephone number
0031 40 3400 383 General / Sales
0031 40 3400 384 Service
Copyright
Zeliox Compact User manual © 2021 Zeliox Compact. All rights reserved.
Nothing in this document may be reproduced in any way whatsoever or
shared with third parties without the written permission of Zeliox BV.
4
Warnings
WARNING:
• Do not use the Zeliox Compact without fully reading this user manual.
WARNING:
• This is a category C2 UPS product.
• In an inhabited area, this product can cause radio interference, in
which case the user should take additional measures.
• This is a Class I product. Only connect a 230V from a source that is
grounded, including any extension cords.
• This is a Class 9 (hazardous materials UN3481) electrical device,
this means that it is a power source with high energy density and
hazardous materials in a sealed metal housing.
• Make sure that the installation of the Zeliox Compact meets the
IP20 requirements, the lowest degree of protection of the Zeliox
Compact is IP20.
WARNING:
• Check that the Zeliox Compact is not damaged during transport.
If damaged, contact the supplier.
• Disable the Zeliox Compact completely (on/off switch) and check for
dangerous voltages before changing a connection.
• Make sure that the Zeliox Compact is connected correctly and
according to the instructions for use.
• The installation must be done according to the national guidelines.
• The installation must be carried out by professional installers only.
• When installing, national security regulations must be strictly
housing, installation, spacing, clearance, markings and separation.
• Heavy inductive loads can cause damage to the Zeliox Compact.
Additional optional measures are needed for this type of high loads.
For more safety information, see Appendix II – MSDS (Material Safety
Data Sheet pag. 32-40).
5
Notes
Please note
• Do not submerse in water.
• Do not short-circuit.
• Do not open the Zeliox Compact.
• Do not discharge the Zeliox Compact before fully charging it.
• Charge only within the indicated limits.
• Keep the Zeliox Compact turned off during movement and
installation.
• Do not place the Zeliox Compact upside down or on its back.
• Do not switch the Zeliox Compact in series or in parallel.
•
• Do not cover or block the fan air intake/outlet.
• Do not plug into its own socket.
Risks in case of re:
• Risk of explosion.
• Combustion gases that are highly irritating to the eyes and respiratory organs.
General measures to be taken by the driver when these risks occur:
• Turn off the engine.
• Place a warning signal on the road to warn others.
• Inform others of the risk and make sure you stay out of the wind.
lithium batteries (UN3481) on board.
In case of re:
• Ventilate.
• If possible, immerse the Zeliox Compact completely in water.
oxide are formed.
• Possibly extinguishing with a carbon dioxide extinguisher.
NON SPILLABLE
LI-ION BATTERY
6
User
Manual
Zeliox Compact
ENGLISH
7
1. Operation
1.1 Operation Zeliox Compact
To operate the Zeliox Compact push the on/off switch with LED (1) and the
TFT screen (2).
1. On/off switch
2. Socket outlet
3. Control screen
1.1.1 On/off switch
With a push of the on/off switch, the Zeliox can be switched on and off.
The button contains a LED that can display various statuses* of the Zeliox
Compact.
An optional dashboard connector has the same function one to one.
* LED statuses:
• Constantly on: the Zeliox Compact is on.
warning to the end user that the Zeliox is connected to the mains and that
driving away is not possible. If necessary, the Zeliox Compact can
be connected to the start interrupter of the vehicle. Ask for the
possibilities at your supplier.
mode and needs to be charged.
5
6
1
34 2
4. Light sensor
5. USB type A 5V 2A
6. Fan air
8
1.1.2 TFT control panel
The Zeliox Compact can be fully operated via the TFT control panel.
The control panel is a resistive touch screen for better robustness.
1.1.3 USB type A
No data exchange takes place over this output, only a voltage of 5V is
offered. The maximum current that the Zeliox Compact can deliver is 2A
distributed between the two connectors.
Type Connector: USB type A.
1.1.4 230V outlet
This standard socket (Schuko) allows you to connect your electrical
devices.
Use a extension cord if multiple devices need to be used at the same
time. Make sure that the total power does not exceed the Zeliox Compact
Do not use a extension cord connected to the Zeliox Compact outside the
harness (vehicle/vessel) if the Zeliox is not connected to the mains.
The voltage on this connector is around 230V/50Hz and is purely
sinusoidal, which results in less electromagnetic radiation.
The maximum output power is 1600W.
1.1.5 Light sensor
The light sensor is located at the front next to the USB, it is used for
ambient dimming.
1.1.6 Fan air
Do not block or cover the intake or outlet.
9
2. Main menu
Using the various icons, the Zeliox Compact can be operated and the
statuses can be viewed.
2.1 Status information on the main menu
2.1.1 The following statuses are displayed on the main menu:
1. Vehicle charging status – Indicates whether the Zeliox is charging via
the vehicle.
2. 230V in status – Indicates whether Zeliox Compact is connected to
shore power.
3. Status information – Displays the various voltages in the Zeliox Compact.
4. Isolation monitor status – Indicates the status of the isolation monitor.
5. Zeliox settings statuses – Indicates which settings are active.
6. Various operational statuses.
7. Settings menu – Only accessible by the experts of Zeliox® (installation
manual).
8. 230V out-Indicates whether the 230V output is active (operable).
9. 12V out-Indicates whether the 12V output is active (operable).
10. Current indication–Indicates whether there is power running to the
various outputs.
11. Main battery status – Displays the current capacity of the main battery.
D B F
ISO:
Status:
1
2
3
4
5 6
7
8
9
1011
10
2.1.2 Control options from main menu
The following can be operated via the main menu:
• 230V output
• 12V output
• Status page
• Settings menu
2.1.3 Various Operational statuses
This trio of spheres displays the following statuses:
D
– Lights up green when DC/DC converter (vehicle charging) is active
B
– Lights up green when backup battery is charging
F
– Lights up green if Main battery is full
2.1.4 Isolation guard status
These three colored spheres display the status of the insulator watchman:
– Green: 230V in available
– Yellow: Isolation monitor active
– Red: Isolation error detected
Indice
