Zenitel VINGTOR STENTOFON ECP-AA1 Guida rapida
Installation, Configuration & Operation
ECP-AA1 Intercom
A100K11789
TECHNICAL MANUAL
2 ECP-AA1 Installation, Configuration & Operation A100K11789
Contents
1Introduction......................................................................................................... 3
1.1 Document Scope...................................................................................................................3
1.2 Products.................................................................................................................................3
1.3 Publication Log......................................................................................................................3
1.4 Related Documentation.........................................................................................................3
2Installation & Mounting....................................................................................... 4
3Connectors & Power........................................................................................... 5
3.1 Connectors ............................................................................................................................5
3.1.1 Ethernet Connector .............................................................................................................................5
3.1.2 I/O Connector......................................................................................................................................5
3.2 Power.....................................................................................................................................5
3.3 Connection to Emergency Break...........................................................................................6
3.4 Connection to CCTV System.................................................................................................6
4Configuration....................................................................................................... 7
4.1 Initial Setup............................................................................................................................7
4.2 Audio Settings .......................................................................................................................8
4.3 I/O Settings............................................................................................................................9
4.4 Output Settings......................................................................................................................10
4.4.1 CCTV Interface....................................................................................................................................10
4.4.2 General Settings..................................................................................................................................11
4.5 Call Button Settings...............................................................................................................13
4.5.1 Ringlist Settings...................................................................................................................................14
4.6 SIP Configuration ..................................................................................................................15
5Operation............................................................................................................. 16
3 ECP-AA1 Installation, Configuration & Operation A100K11789
1 Introduction
1.1 Document Scope
This document describes the installation, configuration and operation of the ECP-AA1 Intercom.
1.2 Products
Item Number
Item Name
1008192011
ECP-AA1 Intercom
1.3 Publication Log
Revision
Date
Author
Status
1.0
18.5.2016
HVD/HKL
Published
1.1
16.9.2019
HKL
New doc no. A100K11789
1.4 Related Documentation
Doc. no.
Documentation
A100K11194
Turbine IP Intercoms Technical Manual
4 ECP-AA1 Installation, Configuration & Operation A100K11789
2 Installation & Mounting
The ECP-AA1 is flush-mounted using 4 screws of type:
•M4x16 DIN 7991 A4 –Flat Head Socket Cap Screw, Stainless Steel A4 DIN7991
•Length as required
5 ECP-AA1 Installation, Configuration & Operation A100K11789
3 Connectors & Power
3.1 Connectors
The ECP-AA1 has 2 connectors located at the bottom of the unit.
3.1.1 Ethernet Connector
Type: M12, D-coded, Female, 4-pin
1
TD+
2
RD+
3
TD-
4
RD-
3.1.2 I/O Connector
Type: M12, A-coded, Female, 8-pin
1
+5V DC
2
GND
3
I/O 1
4
I/O 2
5
I/O 3
6
Relay –Common
7
Relay –NC
8
Relay –NO
3.2 Power
The ECP-AA1 is powered through the Ethernet connector via Power over Ethernet (PoE). The
Ethernet connector is located at the bottom of the unit.
6 ECP-AA1 Installation, Configuration & Operation A100K11789
3.3 Connection to Emergency Break
The emergency break provides a clean contact to the ECP-AA1. Its purpose is so that an
emergency call is made as soon as the emergency break handle is operated.
Procedure
•Connect the clean contact between pins 2 and 3 on the I/O connector.
3.4 Connection to CCTV System
The ECP-AA1 provides a clean contact to the CCTV system. Its purpose is to send a trigger to the
CCTV system when a call is made from the ECP-AA1.
Procedure
•Connect the CCTV trigger input between pins 6 and 8 on the I/O connector.
7 ECP-AA1 Installation, Configuration & Operation A100K11789
4 Configuration
4.1 Initial Setup
The ECP-AA1 is delivered with factory default settings. By default, the unit’s IP settings are
configured according to DHCP.
To configure the unit:
1. Press the call button on the unit for it to speak its IP address
2. Ensure that the IP address of your PC is in the same range as that of the station IP
address.
3. Access the station by logging into the web interface using a standard web browser on
your PC
4. In the browser’s address bar, enter the station IP address and press the ENTER key
•The station login page will be displayed.
5. Click Login
6. Enter the default User name: admin
7. Enter the default Password: alphaadmin
8. Select Station Main > Main Settings
9. Under Station Mode select Use SIP
10. Under Product Model And Accessory select Kit
11. Depending on system requirements, set the IP Settings to DHCP or Static IP. In the
latter case, fill in the network details as required
12. Click Save
13. On the new page, click Apply
The unit will now reboot.
8 ECP-AA1 Installation, Configuration & Operation A100K11789
4.2 Audio Settings
Normally no changes are required to be made to the audio settings, but depending on the specific
circumstances where the unit is installed, minor adjustments may be needed.
•Select SIP Configuration > Audio Settings
On this page it is possible to set:
•Speaker Volume
•Microphone Sensitivity
•Noise Reduction Level
Furthermore, it is possible to select different algorithms for the Conversation Mode.
Note that due to the close proximity of the microphone and speaker it may be necessary to select
Robust Duplex as Conversation Mode if either the speaker level or the microphone sensitivity is
increased from that of the default setting.
9 ECP-AA1 Installation, Configuration & Operation A100K11789
4.3 I/O Settings
•Select SIP Configuration > I/O Settings
Under Configuration set the following values for the I/O Pins:
-I/O Pin 1: Input 1
-I/O Pin 2: Input 2 or Output 2 –depending on the application for which this I/O will be used
-I/O Pin 3: Input 3 or Output 3 –depending on the application for which this I/O will be used
-I/O Pin 4: Input 4
-I/O Pin 5: Output 5
-I/O Pin 6: Output 6
•Click Save
Although the ECP-AA1 will not use these settings until after a reboot, it is not necessary to reboot
at this stage.
10 ECP-AA1 Installation, Configuration & Operation A100K11789
4.4 Output Settings
•Select SIP Configuration > Relay Settings
4.4.1 CCTV Interface
For Choose Relay To Configure:
•Select Relay 1
Under Configuration set the following values:
-Outgoing Ringing: On
-Idle: Off
•Click Save
Indice
Altri manuali Zenitel Sistema di interfono
Zenitel
Zenitel VINGTOR STENTOFON ITSV-1 Manuale utente
Zenitel
Zenitel TCIS-1 Guida
Zenitel
Zenitel ITSV-2 Manuale utente
Zenitel
Zenitel EAPFX-1-V2 Manuale di istruzioni
Zenitel
Zenitel Turbine Compact IP + Guida
Zenitel
Zenitel EAPFX-1-V2 Guida
Zenitel
Zenitel VR3G-1 Guida
Zenitel
Zenitel Phontech CIS 3100 Manuale di istruzioni
Zenitel
Zenitel Vingtor Stentofon AlphaCom Manuale utente
Zenitel
Zenitel Vingtor Stentofon ITSV-3 Manuale utente
