Zennio MINiBOX 0-10V X3 Manuale utente

➢

MINiBOX 0-10V X3

Multifunction Actuator with 3 fold 0-10V analog

input/output

ZIO3X010

USER MANUAL

Application program version: [1.0]

User manual edition: [1.0]_a

www.zennio.com

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

CONTENTS

Contents........................................................................................................................................ 2

1 Introduction .......................................................................................................................... 3

1.1 MINiBOX 0-10V X3 ........................................................................................................... 3

1.2 Installation........................................................................................................................ 4

1.3 Start-Up and Power Loss.................................................................................................. 5

2 Configuration......................................................................................................................... 6

2.1 General............................................................................................................................. 6

2.2 Fan Coil............................................................................................................................. 8

2.3 Analog Voltage Outputs ................................................................................................... 9

2.4 Thermostats ................................................................................................................... 10

2.5 Logic Functions............................................................................................................... 11

2.6 Manual Control .............................................................................................................. 12

ANNEX I. Communication Objects............................................................................................... 15

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

1INTRODUCTION

1.1 MINiBOX 0-10V X3

MINiBOX 0-10V X3 from Zennio is a KNX actuator that aims at fulfilling the climate

control needs of KNX environments with integrated fan coil units where the valves in the

pipes are controlled through analogue 0-10 VDC signals.

The actuator provides three analogue outputs, which permits controlling one fan coil

drive consisting of two or four pipes (each with its own valve) and a fan system.

1 fan coil analog module to control 2 and 4 pipes units with 0-10V fan or

valves.

3 independent 0-10V analog voltage outputs configurable as fan or valve of

a fan coil unit or other adjustable load between these voltage levels.

3 independent thermostats.

10 customisable, multi-operation logic functions.

Manual operation / supervision of the outputs 0-10V through the on-board

pushbuttons and LEDs.

Heartbeat or periodical “still-alive”notification.

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

1.2 INSTALLATION

MINiBOX 0-10V X3 connects to the KNX bus through the on-board KNX connector.

Once the device is provided with power from the KNX bus, both the individual address

and the associated application program may be downloaded.

This device does not need any additional external power since it is entirely powered

through the KNX bus.

Figure 1. MINiBOX 0-10V X3. Elements

The main elements of the device are described next.

Test/Prog. Button (4): a short press on this button sets the device into the

programming mode, making the associated LED (5) light in red.

Note: if this button is held while plugging the device into the KNX bus, the

device will enter into safe mode. In such case, the LED will blink in red every

0.5 seconds.

Outputs (1): output ports for the insertion of the stripped cables of the systems

being controlled by the actuator (see section 2.3). Please secure the

connection by means of the on-board screws.

To get detailed information about the technical features of this device, as well as on the

installation and security procedures, please refer to the corresponding Datasheet,

bundled with the original package of the device and also available at www.zennio.com.

1. Inputs/Outputs.

2. 0-10V Output LED Indicator.

3. 0-10V Output Manual Control Button

4. Prog./Test Button.

5. Prog./Test LED.

6. KNX Connector.

7. Fixing Clamp.

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

1.3 START-UP AND POWER LOSS

Depending on the configuration, some specific actions will be performed during the start-

up. For example, the integrator can set whether the output channels should switch to a

particular state and whether the device should send certain objects to the bus after the

power recovery. Please consult the next sections of this document for further details.

On the other hand, when a bus power failure takes place, MINIBOX 0-10V X3 will

interrupt any pending actions, and will save its state so it can be recovered once the

power supply is restored. Also, after failure recovery, the analog outputs and fan coil

module will switch to the specific state configured in ETS (if any).

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

2CONFIGURATION

2.1 GENERAL

After importing the corresponding database in ETS and adding the device into the

topology of the project, the configuration process begins by entering the Parameters tab

of the device.

ETS PARAMETERISATION

The only parameterisable screen that is always available is “General”. From this screen

it is possible to activate/deactivate all the required functionality.

Figure 2. General.

Fan Coil [disabled/enabled]

: enables o disables the “Fan Coil” tab on the left

menu. See section 2.2 for more details.

Analog Voltage Outputs [disabled/enabled]: enables o disables the “Analog

Voltage Outputs” tab on the left menu. See section 2.3 for more details.

Thermostats [disabled/enabled]: enables o disables the “Thermostats” tab

on the left menu. See section 2.4 for more details.

Logic Functions [disabled/enabled]: enables o disables the “Logic Functions”

tab on the left menu. See section 2.5 for more details.

The default values of each parameter will be highlighted in this document, as follows:

[default/rest of options].

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

Heartbeat (Periodical Alive Notification) [disabled/enabled]: this parameter

lets the integrator incorporate a one-bit object to the project (“[Heartbeat]

Object to Send ‘1’”) that will be sent periodically with value “1” to notify that

the device is still working (still alive).

Figure 3. Heartbeat (Periodical Alive Notification).

Note: The first sending after download or bus failure takes place with a delay

of up to 255 seconds, to prevent bus overload. The following sendings match

the period set.

Manual Control [disabled/enabled]: enables o disables the “Manual Control”

tab on the left menu. See section 2.6 for more details.

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

2.2 FAN COIL

MINiBOX 0-10V X3 incorporates a module to control the fan and valves of a 2 or 4

pipes fan coil unit via its 0-10V analog voltage outputs.

Please refer to the specific user manual “Fan Coil ‘Analog’”, available in the MINiBOX

0-10V X3 product section, at the Zennio website (www.zennio.com) for detailed

information about the functionality and the configuration of the related parameters.

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

2.3 ANALOG VOLTAGE OUTPUTS

The MINiBOX 0-10V X3 incorporates three 0-10V analog outputs which can be used

to control fans and valves of a fan coil unit or other adjustable loads or generic outputs

between these voltage levels.

Please refer to the specific user manual “Analog Voltage Output”, available in the

MINiBOX 0-10V X3 product section, at the Zennio website (www.zennio.com) for

detailed information about the functionality and the configuration of the related

parameters.

MINiBOX 0-10V X3

https://www.zennio.com Technical Support: https://support.zennio.com

2.4 THERMOSTATS

MINiBOX 0-10V X3 implements three Zennio thermostats which can be enabled and

configured independently.

Please refer to the specific “Zennio Thermostat”user manual (available in the MINiBOX

0-10V X3 product section at the Zennio homepage, www.zennio.com) for detailed

information about the functionality and the configuration of the related parameters.

Altri manuali per MINiBOX 0-10V X3

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Zennio Controllori

Zennio

Zennio ALLinBOX 1612 Guida

Zennio

Zennio MINiBOX 25 v3 Guida

Zennio

Zennio DIMinBOX 2CH ZDI-DB2C Manuale utente

Zennio

Zennio ZIO-IB24 Manuale utente

Zennio

Zennio ZoningBOX 6 Guida

Zennio

Zennio MINiBOX 25v2 Manuale utente

Zennio

Zennio ALLinBOX 1612 v2 Manuale utente

Zennio

Zennio MAXinBOX 8 Plus Guida

Zennio

Zennio MINiBOX 25 Guida

Zennio

Zennio AudioInRoom ZMU-AUIR Manuale utente

Zennio

Zennio MAXinBOX SHUTTER 4CH Manuale utente

Zennio

Zennio MAXinBOX 24 v2 Guida

Zennio

Zennio HeatingBOX 230V 4X Guida

Zennio

Zennio MAXinBOX FANCOIL 4CH2P Guida

Zennio

Zennio inBOX 24 v2 Manuale utente

Zennio

Zennio ACTinBOX MAX6 Manuale utente

Zennio

Zennio ZCL-8HT230 Guida

Zennio

Zennio ZCL-8HT230 Manuale utente

Zennio

Zennio ZN1CL-IRSC Manuale utente

Zennio

Zennio IRSC Zone Manuale utente

Zennio

Zennio ZN1DI-RGBX4 Manuale utente

Zennio

Zennio MINiBOX 20 Manuale utente

Zennio

Zennio FANinBOX 230V 1CH Guida

Zennio

Zennio MAXinBOX 24 Guida

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente