ZEPCAM T1 Manuale di istruzioni
QUICK START
MANUAL
ZEPCAM T1
ZEPCAM T1-XT
ZEPCAM T1 LIVE
TABLE OF CONTENTS
3 ZEPCAM
4 ZEPCAM T1, T1-XT, T1 LIVE FUNCTIONS
5 LIVE MODULE
5 REMOTE CONTROL
6HOW TO USE THE ZEPCAM - GENERAL
8HOW TO USE THE ZEPCAM - RECORDING
9HOW TO USE THE ZEPCAM LIVE - SETTING UP 3G AND WI-FI
11 HOW TO USE THE ZEPCAM LIVE - LIVE STREAMING
12 HOW TO USE THE ZEPCAM LIVE - VIEWING LIVE STREAMING VIDEOS OVER WI-FI / 3G
13 HOW TO USE THE ZEPCAM LIVE - WI-FI- ADHOC CONNECTION TO ZEPCAM
2
1. 2.
3.
4.
5.
6. 7a. 7b.
ZEPCAM
1. Zepcam T1-XT recorder
2. Zepcam Live module
3. Zepcam Remote control
4. 2a USB charger
5. USB cable
6. Video cable
7a. Zepcam Bulletcam
7b. Zepcam Clipcam
- Various mounts
3
UP
Select
On/Off button
Down
Large Button
Mic in
Video/ Audio out
Use the UP button to browse through the menus
Use the SELECT button to select an option in a menu
Use the SELECT button to switch the Zepcam on and off
Press SELECT for 10 sec. to reset the Zepcam
Use the DOWN button to browse through menus
This button has several functions
• Go directly to CAMERA from the MAIN MENU
• Start recording
• Insert a TAG
• Press and hold this button for a few seconds to stop recording
• Return to the MAIN MENU
To connect a microphone
To connect earphones or a display
ZEPCAM T1, T1-XT, T1 LIVE FUNCTIONS
Large button
USB connection
Indicator lights
Mic in
A/V output
Camera connector
Live module connector
Up
Select
Down
4
STRM
STOP
Connector
Press the STRM (=Stream) button to start streaming
Audio signal: single beep
Press the STRM button to add a TAG in the video file while streaming
Audio signal:
1. Recording mode: Single beep
2. Streaming video mode: Double beep
Use the STOP button to stop streaming and save your video file
Audio signal: single long beep
Use the connector to connect the Live module to the Zepcam recorder
LIVE MODULE
REMOTE CONTROL
The REC/ TAG button has several functions:
• Start recording / Start streaming
• Insert a TAG
• Press and hold the REC/ TAG button for a few
seconds to stop recording
REC/ TAG
Stream
Stop
Connector
REC/ TAG
Remote needs to be paired with Zepcam.
Pair remote in SETTINGS >ADVANCED SETTINGS >REMOTE PAIRING
5
SWITCH THE ZEPCAM ON / OFF
Press and hold the SELECT button for a few seconds, until the Zepcam login screen appears
Select EXIT in the MAIN MENU to switch off the Zepcam
Before you can use the Zepcam, you have to log in
The Zepcam has 3 different levels with different user authorisations
The user names and passwords can be found on the card added to this manual
To change the password, check the Zepcam T1 + T1- Live manual online
With this menu you can check the position of the camera. If necessary you can change
the position of the camera without recording.
There are two ways to start the CAMERA MENU:
• Select the option CAMERA in the MAIN MENU
• Press the LARGE BUTTON
HOW TO USE THE ZEPCAM - GENERAL
LOG IN
CAMERA PREVIEW
• When recording stops, automatically the MOVIES MENU appears
In this menu you will see a list with all the video files on the Zepcam
• Use the SELECT button to select and play a video file
• Select the MOVIES MENU in the MAIN MENU
PLAY BACK VIDEOS on the Zepcam recorder
6
HOW TO USE THE ZEPCAM - GENERAL
• Connect the Zepcam to a PC or Mac using the USB cable
• Go from the MAIN MENU to SETTINGS and ADMINISTRATOR SETTINGS
• Select the option ATTACH TO PC
• The Zepcam is now connected to your PC and the Zepcam drive will appear on your PC screen
• Select the MOVIES folder, you can now copy the video files to your PC
• To charge your battery use the Zepcam USB charger
• Connect the USB charger to the USB connection under the rubber cover of the Zepcam recorder
• Charger indicator LED status: Blue LED flashing: Battery is charging
Blue LED on: Battery is fully charged
• For fastest charging results make sure the Zepcam is switched off
CHARGING the BATTERY
CONNECT TO PC or MAC
This function will only work when logged in as Administrator or Super User
BRIGHT=
CHARGED
USB CONNECTOR
FLASH =
CHARGING
Charging time depends on the Zepcam and the charger:
Zepcam Zepcam XT
Normal charger 6-8 hours 12-16 hours
Fast charger 3-4 hours 6-8 hours
7
While recording you can insert a TAG. With a TAG you can mark important moments in a recording and it
makes it easier to trace back these important moments in the video file.
• While recording press the LARGE button
• While recording you shortly press the REC/ TAG button on the remote control
(The ORANGE LED light on the remote control will flash)
• While streaming press the STRM button on the Live module
HOW TO USE THE ZEPCAM - RECORDING
For local recording make sure the Live module is disconnected or switched off.
When the Live module is connected, the Zepcam automatically switches to streaming mode.
START RECORDING
• Use the LARGE BUTTON or select CAMERA in the MAIN MENU
• Press RECORD while in the CAMERA menu
• Press the REC/ TAG button on the remote control
While recording the RED LED lights on the recorder and remote control flash (orange when streaming).
INSERT TAG
• Press STOP in the CAMERA menu
• Press the REC/ TAG button on the remote control, until the GREEN LED is flashing
STOP RECORDING
8
Before you can start video streaming you need to set up the wireless network (3G or Wi-Fi) connection.
HOW TO USE THE ZEPCAM LIVE - SETTING UP 3G / WI-FI
SETTING UP Wi-Fi STREAMING
For the first Wi-Fi network setup we recommend to generate a special Wi-Fi setup file. Once your Zepcam
has access to a Wi-Fi network it is easier to add new Wi-Fi networks via a special web interface.
First time Wi-Fi setup: Generate Wi-Fi file:
• Go to live.zepcam.com
• Click on CREATE WI-FI SETUP
• Enter the exact Wi-Fi details (SSID, PASSWORD, security level) and select GENERATE
• Copy the downloaded file (named wpa_supplicant.conf) to the root folder of your Zepcam
• Disconnect the Zepcam from your PC
• Choose SETTINGS >STREAMING SETTINGS >WI-FI >SETTINGS >ADVANCED SETTINGS
>UPDATE CONFIG FILE WI-FI
• The Zepcam can now be connected to the Wi-Fi network
The word LINK appears next to the Wi-Fi icon
9
• Connect the Zepcam to your Wi-Fi network (STREAMING SETTINGS>Wi-Fi: On)
• Find the Zepcam IP address (STREAMING SETTINGS >WI-FI >DETAILS>WIRELESS IP ADDRESS)
• On your computer (connected to same Wi-Fi network) open your browser and enter the IP address
• In your browser: go to settings
For APN settings:
• Enter your APN setting supplied by your telecom provider, or find them on the internet
For Wi-Fi settings:
• Enter the Wi-Fi details (NAME, PASSWORD, security level) and select UPDATE WI-FI
• The new APN and Wi-Fi settings are now added to your Zepcam
To set up 3G streaming, an UNLOCKED SIMcard with data plan is needed (no PIN lock activated)
• Make sure the Zepcam Live module is NOT attached to the Zepcam recorder
• Open the live module by using a screwdriver
• Place your SIM card in the SIM card reader and close the live module by using the screws
• Insert the connector of the live module in the back of the recorder
• Switch on the recorder, login with your personal id and go to SETTINGS >STREAMING SETTINGS
>3G >SETTINGS
• Now select provider (the Zepcam will search for mobile provider, this may
take a few minutes) and choose your provider with the right subscription
• Manual add provider APN (see adding APN settings) via Wi-Fi login
• Wait until you see the 3G icon on the top of the recorder screen, which
indicates you have a connection. If the word LINK appears, streaming is
possible
SETTING UP 3G STREAMING
Make sure you have a SIMcard with a sufficient data plan
ADDING APN SETTINGS OR WI-FI NETWORKS
HOW TO USE THE ZEPCAM LIVE - SETTING UP 3G / WI-FI
10
Altri manuali per T1
2
Questo manuale è adatto per i seguenti modelli
2
Indice
