Zephyr Adjustable Depth Liners AK088xAS Manuale utente

*Dimension does not include 3/8” wide flange around liner.

**The inside depth shown in the table above assumes a minimum cabinet backboard thickness of 3/8”.

17 1/2” - 20 1/2” 17 1/8” - 20 1/8”

20 1/2” - 23 1/2” 20 1/8” - 23 1/8”

Without Backboard **With Backboard

*Inside Depth (B)

*Inside

Width (A)

Liner

Model Custom Hood

Exterior Width

Power Pack

Model

AK0800AS

AK0836AS

AK0806AS

AK0842AS

AK0848AS

AK0854AS

AK0860AS

30 inches

36 inches

42 inches

48 inches

54 inches

60 inches

AK8000AS

and

AK8100AS

AK8200AS

AK8300ASX

28 1/2”

34 1/2”

40 1/2”

46 1/2”

52 1/2”

58 1/2”

20 1/2” - 23 1/2” 20 1/8” - 23 1/8”

AK0886AS

AK0882AS

AK0888AS

36 inches

42 inches

48 inches

34 1/2”

40 1/2”

46 1/2”

AK0884AS

AK0880AS 54 inches

60 inches

AK8800AG

and

AK8800AS 52 1/2”

58 1/2”

21/16''

3/4''

Plywood base thickness: 3/4”

thickness:

FIG 1

Installation -

Recommended

WARNING:

When building a custom hood for a power pack, always follow all applicable construction codes and standards.

See the illustrations and table below to locate your liner choice and use corresponding custom hood

base dimensions. For the liner installation, only the bottom of the custom hood is needed. Do not

finalize the entire custom hood yet, because an opening is needed for the power pack.

Zephyr recommends the base of the custom hood to be 3/4” thick plywood. The sides,

front and backboard (if included) of the custom hood to be 3/4” thick, assuming standard

cabinet widths.

FIG 1:

Consider the shape and size of the power pack to determine the configuration of the custom hood.

For more details, refer to the installation manual of the power pack.

FEB09.0201

AK08xxAS Adjustable Depth Liners

www.zephyronline.com

Zephyr Corporation

2277 Harbor Bay Pkwy, Alameda, CA 94502

Tel: 1.888.880.8368 Fax: 1.888.990.8368

e-mail: [email protected]

CAUTION:

Before installing, remove any protective film from all parts.

The custom hood liner must be installed before the power pack unit. For installation into shallow

cabinets (20-

1/2

” to 21-

1/2

“ inside depth) the power pack must be installed before the liner front

panel section. This must be done because the power pack flange must fit under the liner front

panel section when an overlap occurs.

Refer to power pack instructions for mounting height details.

Install 1 small pad (A), included in the

hardware package, to each side of the main

liner plate. (See figures 1 and 2)

Temporarily install the main liner plate (B) to

the external base of the custom hood (C).

When inserting the main liner plate, push

slightly on the pads (A) to prevent damage.

Main liner plate should be positioned as far

back as possible.

Using a pen, mark the outline of the future

opening for the power pack. Remove the

main liner plate (B) from the custom hood.

Cut out an opening in the bottom of the

custom hood.

Reinstall the main liner plate to the base of

the custom hood and secure it with (5) 3/4”

screws.

Slide the front panel section (D) into the nose

of the custom hood base. Take care not to

scratch the main liner plate when installing

the front panel section of the liner. Assemble

it to the cabinet using (3) 1/2” screws.

Note: When installing the power pack it will need to be secured to a wood surface and not only to

the liner. See power pack installation manuals for more detailed mounting instructions.

www.zephyronline.com

3 4

Installation -

ower Pack Liner

AK08xxAS Adjustable Depth Liners

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Zephyr Accessori

Zephyr

Zephyr PRB24C01BPG Guida all'installazione

Zephyr

Zephyr PRB24C01BG Guida all'installazione

Zephyr

Zephyr Presrv PRB24C01CPG Guida all'installazione

Zephyr

Zephyr Pattern Glass AHG-00BL Manuale utente

Zephyr

Zephyr Presrv PRKB24C01AG Guida all'installazione

Zephyr

Zephyr PRWB24F02AG Guida all'installazione

Zephyr

Zephyr Duct Cover Extension Z1C-00LL Manuale utente

Zephyr

Zephyr Presrv PRB24C01AG-ADA Guida all'installazione

Zephyr

Zephyr PRB24C01AS-ADA Guida all'installazione

Zephyr

Zephyr Duct Cover Extension Z1C-00HZ Manuale utente

Zephyr

Zephyr Presrv PRB24C01CG Guida all'installazione

Zephyr

Zephyr Presrv PRB24C01ABSG Guida all'installazione

Zephyr

Zephyr ARC Z1C-00SL Manuale utente

Zephyr

Zephyr PRB24C01AS-OD Guida all'installazione

Zephyr

Zephyr Presrv PRB24C01CBSG Guida all'installazione

Zephyr

Zephyr Duct Cover Extension Z1C-00LA Manuale utente

Zephyr

Zephyr Presrv PRB24C01BBSG Guida all'installazione

Zephyr

Zephyr Duct Cover Extension Z1C-00PN Manuale utente

Zephyr

Zephyr Presrv PRPB24C01AG Guida all'installazione

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente