Zoko U300 Manuale utente
U300 Ｈａｎｄｈｅｌｄ Reader
User Manual
Shielded USB cable with a ferrite core must be used with this unit to ensure compliance with the Class B
FCC limits.
1
Copyright
1． Copyright ownership belongs to Shenzhen Zoko Industry Development Co., Ltd
2． The company’s products have been approved and being approved by the People’s Republic
of patent protection.
3． This user manual shall replace all other versions published before.
4． Publish date: June 2013
300
2
U300 Ｈａｎｄｈｅｌｄ Reader Product introduction
Model：
Product naming
Product series no.
AbbreviationofUHF
图 2 Product naming
U300 Ｈａｎｄｈｅｌｄ Reader，applies sensor and wireless RFID technology, with UHF module
produced in America built inside, and is able to read ID cards, display data, store data
and transmit data through wireless technology all at once. The product has PC plastic
housing of high resistance, and is waterproof, dust-proof, anti-static and durable. The
outstanding features of the handheld reader are user-friendly, of low power consumption
and high precision, quick response and easily portable.
。
Contents
This user manual provides operation and service instruction of U300 Ｈａｎｄｈｅｌｄ reader, and
is composed of six chapters.
Chapter One: Safety warnings
This chapter gives precautions and safety warnings.
Chapter Two: Settings and operation instruction
This chapter illustrates settings of the product and how to operate.
Chapter Three：Maintenance
This chapter provides instructions on daily maintenance of the products.
Chapter Four：Trouble-Shooting
This chapter gives solutions for frequently seen troubles.
Chapter Five：Technical specification
U 300
3
This chapter introduces the technical spec and working standard of this product.
Chapter Six：Product service and technical support
This chapter shows access to service and technical supports.
4
Chapter One: Safety warnings
Symbol illustration
★ Severe danger may be caused to threat safety.
* Precautions and reminder.
※ Notes and description.
！ Warnings, it may affect or damage the instrument functions.
Safety warnings
★ Do not change any components or parts of the device passed QA test.
★ Do not change battery or charge the device at dangerous place.
★ Never connect any accessories at dangerous place.
★ Never dismantle or open the device in a flammable or explosive environment.
★ The battery is specially produced for the device. Do not apply unauthorized batteries
to the device or it may be dangerous!
★Never user batteries that are not listed in this user manual!
Chapter Two Settings and operation instruction
Part 1 System composition
1. U300 Ｈａｎｄｈｅｌｄ Reader
Portable handheld device for user, able to read cards, store data and
transmit data through wireless technology to management center.
UHFRFID contactless card reading
BT wireless data transmission
Industrial product design, shatter-resistant, waterproof
2. RFID tag
5
Part 2 Operation instructions
1. Buttons
Device is off. 1.User presses CENTER
button for two seconds
to turn device on.
Device is in Read
Mode(EPC default).
2.Read Mode: User
presses CENTER to read
UHF tag.
6
Little Mango UHF Reader Press CENTER
button to read tag SETTINGS
EPC:0c210531607300312202137f Press
CENTER button to read tag SETTINGS
4.ReadMode:Userpresse
sCENTERandreadsadiffe
renttag
EPC:2y345asdf43443456345899ddab
Press CENTER button to read tag
SETTINGS
7
1. In Read Mode, user
presses LEFT button to
display read
“Settings”. User
uses UP and DOWN button
to highlight options.
2. User selects TID and
presses LEFT button for
“OK”. A beep will
confirm the selection.
3. User presses RIGHT
button to go back to
Read Mode.
8
Select Read Mode :EPC TID User
Memory Adjust Power Level OK BACK
Select Read Mode: EPC TID User
Memory Adjust Power Level OK BACK
Little Mango UHF Reader Press CENTER
button to read tag SETTINGS
4. User presses LEFT
button for “OK” to
set Power Level.
5. A beep confirms the
selection.
6.User presses RIGHT
button to return to
Settings Mode
Power Level 15dB Press UP or DOWN to
change OK BACK
Save Success! Power Level 15dB Press
UP or DOWN to change OK BACK
Select Read Mode: EPC TID User
Memory Adjust Power Level OK BACK
9
Device is on. 1. User connects hand
held device to computer
with USB cable. User
presses the DOWN button
to switch to Memory
Drive mode.
2. Computer
application can access
and download Data .txt
file. See Appendix A
for data file format.
EPC:2y345asdf43443456345899ddab
Press CENTER button to read tag
SETTINGS
Comma Separated Values (CSV). Columns:
ID Column Name Column Format Example
1 Date-Time Stamp YY/MM/DDHH:MM:SS 11/02/2121:35:45
2 EPC 24hexadecimalscharacters(ma
x) 0c210531607300312202137f
3 TID or User
Memory
16hexadecimalscharacters(ma
x) e28011302000295e
4 Mode Identifier “EPC” ,“TID” ,or “UID” TID
Indice
