Zomodo FTC014 Istruzioni per l'installazione
ZOMODO.CA
Faucet Installation
FTC014FTC014
Parts List
4 Faucet body
2 Ring
3 O-ring
1 Spout
5 Cartridge
6 Handle
7 O-ring
9 Plasc washer
10 Steel washer
8 Threaded tube
11 Locking Nut
13 Washer
14 Filter connector
12 Converter
1
2
3
4
5
6
7
9
10
11
8
12
13
14
116.5
195
278
Care and Maintenance
In order to ensure proper funcon over the lifeme of the faucet, smoothly
operate the handle and during use. When installing do not over ghten the
locking nut. Regularly clean the faucet with a so, damp cloth and avoid
abrasive cleaners, steel wool, and strong chemicals.
Notes
All pipework must be thoroughly flushed prior to installaon as foreign
materials may block the flow.
1.
Working Specificaons
Working pressure: 20-100 psi
Working temperature: 1-60°C
This faucet must be installed with isolang/wall valves in accordance with
local installaon codes. All ZOMODO faucets are strongly recommended
to be installed by a licensed plumber. Improper installaon may void the
warranty.
FTC014FTC014
SINK WALL
WALL
Locate a hole centre in the countertop at
least 50mm from the wall and with enough
clearance to the rim/flange of the sink.
Dim. A >50mm(2”) and Dim. B >50mm (2”) .
If you need to locate the faucet within these
dimensions, you should ensure enough
clearance for the mounng washers and
nut (9,10,11). Cut a hole 26mm diameter
into the countertop .
Step 2
SINK WALL
WALL
A
B
SINK WALL
WALL
Insert the faucet into the countertop. Then
slide the washers (9 and 10) onto the threaded
tube (8) of the faucet followed by the nut (11)
in the order shown in the diagram. Tighten the
nut (11) with a wrench and ensure the faucet is
correctly aligned above the countertop.
Step 3
Tighten the converter (12) and filter
connector (14) with a wrench, ensure
washer (13) is between the converter (12)
and filter connector (14). Then connect filter
hose to the filter connector(14).
Step 4
Remove the Filter connector (14), disassemble
other parts in sequence (9) (10) (11) (12) (13).
Ensure threaded tube (8) is ght in the faucet
body (4).
Step 1
(1”)
SINK WALL
WALL
Test the faucet flow funcons, clean the
water purificaon equipment.
Step 5
FTC014
Troubleshoong
1. If water is leaking from the threaded tube (8) you should ensure the
O-ring (7) is secure in the groove of the faucet body and reghten. It
is possible that these connecons have loosened when the flexible
hoses are ghtened to the threaded tube.
2. If the faucet is lose or rotatable at the base as it enters the countertop
you should reghten the nut (11) ensuring the handle lever assembly
is correctly posioned.
Altri manuali Zomodo Accessori per cucina e bagno
Zomodo
Zomodo KTC012 Istruzioni per l'installazione
Zomodo
Zomodo BTC015 Istruzioni per l'installazione
Zomodo
Zomodo KTC019 Istruzioni per l'installazione
Zomodo
Zomodo KTC011 Istruzioni per l'installazione
Zomodo
Zomodo FTC015 Istruzioni per l'installazione
Zomodo
Zomodo KTC013 Istruzioni per l'installazione
Manuali Accessori per cucina e bagno popolari di altre marche
Alpha Bidet
Alpha Bidet Alpha One Manuale utente
InSinkErator
InSinkErator H/HC3300 Manuale di installazione
Clou
Clou Xo type 1 Manuale utente
Kohler
Kohler Contra 26448T-4 Manuale utente
Grohe
Grohe Bridgeford 20 158 Manuale utente
Hans Grohe
Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Manuale utente