Zoom IG-4160 Manuale utente
IG-4160
IG-4160IG-4160
IG-4160
Zoom Internet
Zoom InternetZoom Internet
Zoom Internet
Gateway
GatewayGateway
Gateway
User Guide
NOTICE
NOTICENOTICE
NOTICE
This document contains proprietary information protected by copyright, and
this Manual and all the accompanying hardware, software, and
documentation are copyrighted. No part of this document may be
photocopied or reproduced by mechanical, electronic, or other means in
any form.
The manufacturer does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty or representation,
either expressed or implied, with respect to the quality, performance,
merchantability, or fitness for a particular purpose of the software or
documentation. The manufacturer reserves the right to make changes to the
hardware, software, and documentation without obligation to notify any
person or organization of the revision or change.
All brand and product names are the trademarks of their respective owners.
© Copyright 2001
All rights reserved.
Contents
GETTING STARTED .......................................................... 4
1.1 PACKAGE CONTENTS .......................................................... 4
1.2 YOU WILL ALSO NEED ....................................................... 4
1.3 INSTALLATION ROAD MAP ................................................... 5
1.4 FAMILIARIZING YOURSELF WITH YOUR GATEWAY ...................... 7
1.5 CONNECTING THE PC AND THE IG-4160 ................................ 9
CONFIGURING YOUR INTERNET ACCESS METHOD....... 11
2.1 USING A CABLE OR DSL MODEM WITH A DYNAMIC IP ADDRESS ..13
2.2 USING A DSL MODEM WITH A STATIC IP ADDRESS ..................15
2.3 USING A DSL MODEM WITH PPPOE .....................................16
2.4 USING A DIAL-UP OR ISDN MODEM .....................................17
2.5 USING THE GATEWAY WITHOUT WAN ACCESS .......................19
SETTING UP THE GATEWAY AS A PRINT SERVER ......... 20
3.1 CONNECTING THE PRINTER TO THE GATEWAY .........................20
3.2 INSTALLING THE PRINT SERVER SOFTWARE ON A CLIENT PC.......21
3.3 CONFIGURING THE PRINT SERVER FUNCTION ..........................22
3.4 UNINSTALLING THE PRINT SERVER .......................................26
ADVANCED SETUP OPTIONS.......................................... 27
4.1 MODIFYING FIREWALL SETTINGS .........................................27
4.2 CONFIGURING THE LAN DHCP SERVER ................................31
4.3 CONFIGURING A VIRTUAL SERVER ........................................32
4.4 CONFIGURING LAN MAC ADDRESSES ...................................34
4.5 CONFIGURING THE ROUTER ACCESS CONTROL.........................36
4.6 CONFIGURING THE WAN PING RESPONSE ..............................38
4.7 THE CLONE WAN MAC FEATURE ........................................38
SYSTEM ADMINISTRATION ........................................... 40
5.1 MONITORING SYSTEM STATUS ............................................40
5.2 PERFORMING SYSTEM ADMINISTRATION TASKS........................42
5.3 RESETTING THE GATEWAY TO ITS DEFAULT SETTINGS...............44
REGULATORY INFORMATION ........................................ 45
4 IG-4160 Zoom Internet Gateway User Guide
1
Getting Started
1.1 Package Contents
Check that your package includes the following items:
•One Internet Gateway
•One CD-ROM
•One power adapter and power cord
•One Ethernet cable
•Installation instructions, including a Quick Start for cable
modem users, and this User Guide.
If anything is missing or damaged, please contact your supplier.
1.2 You Will Also Need
The IG-4160 is compatible with computers using the Windows,
Macintosh, and Linux operating systems.
Optionally, you can use your Gateway as a print server and share a
parallel port printer connection among multiple PCs. (Note: This
option is only for Windows computers.) If you want to use your
Gateway as a print server, you will need a standard parallel printer
and cable.
Chapter 1: Getting Started 5
1.3 Installation Road Map
The following diagram depicts the different setups that are possible
with your Zoom IG-4160 Internet Gateway.
IG-4160
Internet Gatew ay
COM
WAN
PRINTER
HUB
PRINTER
ETHERNET MODEMS
CABLE MODEMS
ADSL MODEMS
RS232 MODEMS
DIAL-UP MODEMS
ISDN MODEMS
LAN 1
LAN 2
SERVER
DESKTOP PC
10/100BaseT
EQUIPMENT CONFIGURATIONS
Or
LAPTOP PC
10/100BaseT
DMZ
WAN
UNPROTECTED (Public Network)
LAN
PROTECTED (Private Network)
WAN DEVICES LAN DEVICES
The first step is to decide what type of WAN device you intend to
use to access the Internet. (Your choices are depicted on the left-
hand side of the diagram above.)
Once you’ve made that decision, the key stages to set up and use
your Gateway are as follows:
1
11
1Connect the hardware.
2
22
2Establish wired communication with the Gateway using a PC
that we’ll call the Administrator PC.
3
33
3Configure your Internet access method using the
Administrator PC.
4
44
4Connect to the Internet.
Using the following flowchart as a road map should simplify the
process of setting up your Gateway. You can also keep this
flowchart as a handy reference, should you ever want to modify
your Gateway setup.
6 IG-4160 Zoom Internet Gateway User Guide
In this manual we also describe additional options and features
available to you. For example, you can connect a printer to your
Gateway and share it among multiple users. You can also add more
sophisticated capabilities to the Gateway. For instance, you can
modify its built-in firewall protection to accommodate special
gaming or video applications. The flowchart also includes these
additional chapters.
Select the W AN
Device you
want to use to
connect to the
Internet
Go to Chapter 2.1
Cable
Modem
Go to Chapter 2.2
ADSL
Modem
Go to Chapter 2.3
ADSL Modem
with PPPoE
Go to Chapter 2.4
Dial-up or ISDN
Modem
PLAN YOUR GATEWAY SETUP
How Do You Plan to Use Your Gateway?
Are you connecting a
Shared Printer?
Check Only One
No
No
(* Select fo r AP Mode or P rinter S hare Only)
Go to Chapter 3
Yes or Unsure Go to Chapter 4
Yes or Unsure Go to Chapter 5
No Done
Yes
Do you plan to use the
Advanced Features?
Do you plan to use the
System Administration
functions?
Go to Chapter 2.5
No WAN
Device *
No
Go to Chapter 1.5
Connecting your
Administrator PC to the
Gateway
Fam iliarize yourself with
the Internet Gateway Chapter 1.1 to 1.4
Chapter 1: Getting Started 7
1.4 Familiarizing Yourself with Your
Gateway
The Gateway has LED indicators on its front panel so you can
monitor its operation and perform troubleshooting if necessary.
The table below defines these LEDs and how to interpret them.
This table is for reference only and is not required for IG-4160
installation.
LED Function Color Status Description
POWER Power
indicator Green On Power is on.
Blinking @
1 sec.
intervals
Gateway is
functioning properly.
SYS System
status Orange
Rapid
blinking
Gateway is resetting
to factory defaults.
On WAN port is linked.
WAN WAN port
activity Green Blinking
WAN port is
sending or receiving
data.
Green On
LAN port is
connected. No data
is flowing.
Blinking
LAN port is
connected. Data is
flowing.
Link/Act
1~2
Wired LAN
port link
activity status
Off LAN port is not
connected.
On Data rate=100Mbps
100BaseT
1~2
Wired LAN
port data rate Green Off Data rate=10Mbps
The back panel of your Gateway looks like this.
8 IG-4160 Zoom Internet Gateway User Guide
The table below explains the purpose of these back panel ports, or
jacks. When you connect your modem to your Gateway, all
connections will originate from this back panel.
Port Description
COM Serial port in case you want to connect a dial-up or ISDN
modem
PRINTER Parallel printer port for optional printer
1A LAN port for connecting networked computers and other
10/100BaseT Ethernet LAN devices
2A second LAN port for connecting networked computers
and other 10/100BaseT Ethernet LAN devices
WAN In case you want to connect an Ethernet cable or DSL
modem
12VDC Power: DC 12V, 1.5A (minimum)
Before connecting your modem and Gateway, be sure to review
the following pre-installation checklist.
PRE-INSTALLATION CHECKLIST
Review this checklist before setting up your Gateway and modem
✔Check with your service provider: If you have a cable modem,
you may have to register your Gateway’s WAN MAC address
before setting up the Gateway. Note: The WAN MAC address
is printed on the Gateway’s bottom case label.
✔Is your Internet or online service working properly? If
necessary, refer to the instructions provided by your service
provider.
✔Check that an Ethernet NIC card is already installed in your
PC, then turn to page 9.
Chapter 1: Getting Started 9
1.5 Connecting the PC and the IG-4160
The diagram below shows what your completed setup will look
like.
IG-4160
ETHERNET CABLE
(LAN)
MODEM
RF (COAXIAL) OR
PHONE LINE
CONNECTION
Admin PC
CABLE/DSL MODEM
ETHERNET
(WAN) CABLE
or
DIAL-UP/ISDN MODEM
SERIAL (COM PORT) CABLE
A
AA
ABe sure you’ve completed the pre-installation checklist on
page 8.
Shut off your computer and turn off your modem. Don’t
plug the Gateway in yet.
B
BB
BFor cable and DSL modems:
Unplug the Ethernet cable from your PC and plug it into
the WAN port on the back of the Gateway. Don’t unplug
the Ethernet cable plugged into the modem.
For dial-up and ISDN modems:
Unplug the serial cable from the PC and plug it into the
COM port on the back of the Gateway. Don’t unplug the
serial cable plugged into the modem.
C
CC
CUsing the Ethernet cable supplied with the Gateway, plug
one end into a LAN port (labeled 1and 2) on the back of
the Gateway and plug the other end into the PC.
10 IG-4160 Zoom Internet Gateway User Guide
D
DD
DTurn the modem back on. If you are using a cable or DSL
modem, wait until it synchronizes itself with the modem
service. (You’ll know it’s synchronized when the cable
modem’s light goes from blinking to steady.)
E
EE
EPlug the Gateway in: Plug one end of its power adapter into
the 12VDC power jack on the back of the Gateway and
then plug the other end into a wall outlet. The Gateway’s
SYS indicator will come ON for about 10 seconds, and
then it will flash rapidly a few times. When the indicator
flashes continuously once per second, the start-up process
is complete, and your Gateway is ready.
F
FF
FNote: If you are using a cable modem and your service
provider has instructed you to call back with your
Gateway’s WAN MAC address, now is the time to do so.
Turn your computer back on and restart it.
Altri manuali per IG-4160
1
Indice
Altri manuali Zoom Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
