Zoom Multistomp MS-70CDR Istruzioni per il montaggio
MS-70CDR Firmware Update Guide (Mac)
Copyright(C) 2019 ZOOM Corporation. All Rights Reserved.
•Macintosh®, Mac®, Mac OS®, OS X®and macOS® are trademarks or registered trademarks of Apple Inc.
Note: Other Product names, registered trademarks and company names in this document are the property of their
respective companies.
Note: All trademarks and registered trademarks in this document are for identification purposes only and are not
intended to infringe on the copyrights of their respective owners.
The illustrations in these instructions might differ from actual screens.
Contents
1. Introduction...................................................................................................................... 2
Precautions ......................................................................................................................... 2
2. Updating the firmware ..................................................................................................... 3
●
Zoom Corporation does not bear liability for any damages or third-party claims arising from the
use of the software, whether directly or indirectly. Unauthorized redistribution, sale, leasing, renting,
alteration, or reverse engineering of the software is prohibited. Features and specifications of the
software and the contents of the documentation may be changed in future without notice.
2
1. Introduction
Thank you very much for downloading the firmware update application for
the MS-70CDR.
This document explains how to update the firmware for the MS-70CDR.
Precautions
1）Log in to your Mac computer using an account with administrator privileges.
2）Before starting this application, shut down all other applications that are running.
In addition, if any MIDI or audio devices are connected by USB cable to the
computer you are using, disconnect them all.
3
2. Updating the firmware
2.1 While pressing both the up and down cursor keys, use a USB cable to
connect the USB connector to the computer.
The FIRMWARE UPDATE screen appears.
2.2 Double-click the firmware update application icon to launch.
2.3 With a MS-70CDR, click the “MIDI IN” and “MIDI OUT” fields to open lists of MIDI
devices and select “ZOOM MS Series” for both.
If nothing is shown in the fields, click [Rescan Device] button.
4
2.4 Click the [Execute] button to start the firmware update. The progress of the firmware
update appears as a bar like this.
Do not disconnect the USB cable while the firmware is being updated.
In the unlikely event that a firmware update should fail, follow the procedures from
step 2.1 to update the firmware again.
2.5 When the firmware update completes, it will appear as follows.
Click the [Exit] button to close the firmware update application. Then, turn the
MS-70CDR power off.
This completes the firmware update.
©2019 ZOOM CORPORATION Z2I-3014-03
Altri manuali per Multistomp MS-70CDR
1
Indice
Altri manuali Zoom Pedale musicale
Zoom
Zoom 503 AMP SIMULATOR Manuale utente
Zoom
Zoom G2 Manuale utente
Zoom
Zoom 505 GUITAR Manuale utente
Zoom
Zoom 9000 Manuale utente
Zoom
Zoom G2 Manuale utente
Zoom
Zoom G1 Four Manuale utente
Zoom
Zoom MULTISTOMP MS-50G+ Manuale utente
Zoom
Zoom G2.1u Manuale utente
Zoom
Zoom B1 FOUR Manuale utente
Zoom
Zoom G2.1NU Manuale utente
Zoom
Zoom G2.1u Manuale utente
Zoom
Zoom 507 REVERB Manuale utente
Zoom
Zoom 506 BASS Manuale utente
Zoom
Zoom 8080 Manuale utente
Zoom
Zoom G1N EXT Manuale utente
Zoom
Zoom 506II Bass Manuale utente
Zoom
Zoom Guitar Effects Console G9.2tt2q Manuale utente
Zoom
Zoom B22 Manuale utente
Zoom
Zoom 2020 Manuale utente
Zoom
Zoom G3 Manuale utente
