Zoom Zoom ADSL USB Modem Quick Start guide None Manuale utente

Quick Start

ADSL USB Modem

This Quick Start contains all the information you should need

to install and use your Zoom ADSL USB modem. Instructions for

both Windows and Macintosh computers are included.

Important! Before You Begin

Before you install your ADSL modem, you must have ADSL

service enabled on your telephone line. To do this, you need

to sign up with an ADSL service provider. Your service

provider may refer to “ADSL service” as “DSL service.”)

Package Contents

Your package contains the items shown below:

The CD contains the installation software, documentation,

warranty, and Customer Support information.

In addition, the package may include:

•Phone-jack adapter to adapt the phone cord to a particular

phone jack (certain countries only)

•ADSL line filter(s) (certain modem model only).

If anything is missing or damaged, please contact Zoom Customer

Support or your retailer or distributor.

Zoom ADSL

USB Modem Software

CD-ROM

Phone Cord USB Cable

2 ADSL USB Modem Quick Start

You Will Also Need

•A Windows 98/98SE/Me/2000/XP or Macintosh computer

equipped with a USB port.

•An ADSL-enabled telephone wall jack to plug the modem into.

Quick Start

If you have a Macintosh computer, please go to page 15. If you

have a Windows computer, please continue below.

Step 1: Installing the Software

and Hardware for Windows

1Make sure that your computer is on.

2Insert the supplied CD into the CD-ROM drive of your

computer. The CD should start automatically and the

Language Selection screen should appear. (If the CD does

not start automatically, on the desktop, click the Start button,

click Run, and then type D:\setup.exe, where Dis the letter

of your CD-ROM drive.)

3Select your language. The Main Menu screen then opens.

4Click Installation Wizard.

5Click USB to start the software installation, then click Next

when prompted.

4 ADSL USB Modem Quick Start

6In the Country Selection dialog box, select your country and

click Next. If your country is not listed, select Other.

Depending on your selection, one of the following will happen:

!If your country only has one type of ADSL service, the

Start Copying Files dialog box opens. Go to Step 9.

!If your country has more than one type of ADSL service,

the Service Provider Selection dialog box opens. Go to

Step 7.

!If you selected Other, the Internet Settings Selection

dialog box opens. Go to Step 8.

7If your country has more than one type of ADSL service, the

Service Provider Selection dialog box opens.

Select your service.

If you do not know which service to select, please contact your

ADSL service provider to get the information. If you cannot

or do not want to contact your service provider, we

recommend that you first try the entry labeled (1). If you

cannot connect once you have completed the installation, you

will have to go to page 24 for additional instructions on

changing your settings.

Go to Step 9.

6 ADSL USB Modem Quick Start

8If you selected Other in Step 6, the Internet Settings

Selection dialog box opens.

Enter the VPI and VCI numbers in their corresponding boxes,

select the Encapsulation Type from the drop-down list, and

click Next.

If you do not know your service provider’s settings, please

contact your provider and ask for them.

9In the Start Copying Files dialog box, review the settings

displayed. Click the Back button if you want to change

anything, or click Next to begin the installation.

1010

10 When the installation is complete, click Finish to restart

your computer. As your computer restarts, do the

following:

aClick OK when you are prompted to connect the USB

hardware, and then plug one end of the USB cable

into the modem’s USB port and the other end into

your computer’s USB port.

bPlug one end of the supplied phone cord into the

modem’s jack labeled LINE and the other end into

the ADSL wall jack.

cAs the modem performs a startup sequence, you may

see a Found New Hardware box indicating the

progression of the installation. Typically no user action

is necessary. When the startup sequence is complete,

you will see a message that you have successfully

connected the USB hardware. Depending on your

operating system, you may be prompted to restart your

computer.

8 ADSL USB Modem Quick Start

1111

11 If you want to plug a phone in through the modem, you

can do so by plugging it into the modem’s jack labeled

PHONE. If you do this, you should use a filter for that

phone as discussed below.

We HIGHLY RECOMMEND that you install a filter

for EVERY phone and fax that is sharing the ADSL

phone line. (Do not plug a filter between the wall jack

and the modem.) Phone filters block the ADSL

frequencies so that someone making a phone call will not

hear modem noise on the line. Filters also keep phone

conversations from interfering with ADSL performance.

You may have received ADSL phone filters with your

modem. If you did not, or if you need more filters, they

are available at most retail stores that carry consumer

electronics.

To attach a filter, plug the phone or fax machine’s cord

into the filter’s PHONE end and plug the filter’s LINE

end into the wall jack.

Congratulations! You have installed the modem software and

hardware. Now continue with the next section, Configuring Your

Web Browser.

Step 2: Configuring Your Web

Browser

The software that you use to make an Internet connection must be

set for a network connection, not a dial-up connection.

This section includes instructions for recent versions of two

popular Web browsers: Internet Explorer Version 5.0 (or later) and

Netscape Navigator Version 7.2. Netscape Navigator instructions

are on page 11, and Internet Explorer instructions are below.

Tip:

If you are using an earlier version of one of these browsers, the

configuration may be slightly different from below. In those

cases—or if you are using another browser altogether—configure

the browser to use a network connection (this might be called a

“Local Area Network” or “broadband” connection).

Configuring Internet Explorer

The following instructions are for Internet Explorer Version 5.0 or

later. (If you do not have this version, you can get a free upgrade

from Microsoft Corp. If you are not sure what version you have,

open Internet Explorer and from the Help menu, choose About

Internet Explorer. The version number is directly below the

Microsoft Internet Explorer logo. You can ignore all the numbers

after the period following the first digit.)

1On the desktop, right-click the Internet Explorer icon, and

select Properties.

Tip:

If you cannot access Internet Explorer in this way, open your

computer’s Control Panel (click the Start button and then,

depending on your computer, either click Control Panel, or

click Settings and then Control Panel). In the Control Panel,

double-click the Internet Options icon. If this icon does not

appear, double-click the Network and Internet Options icon

and then double-click the Internet Options icon.

10 ADSL USB Modem Quick Start

2On the Internet Properties dialog box, select the

Connections tab, then click the Setup button.

3The setup process will proceed differently, depending on your

operating system. The following table details the process for

your Windows computer.

Windows XP Windows 98/Me/2000

a. On the

Welcome to the

New Connection Wizard

dialog box, click Next.

(If you see a Location

Information dialog box,

click Cancel and then

when asked if you are sure

you want to cancel, click

Yes to return to the

Welcome dialog box.)

b. On the

Network

Connection Type dialog

box, select Connect to

the Internet, then click

Next.

c. On the

Getting Ready

dialog box, select Set up

my connection manually,

then click Next.

d. On the

Internet

Connection dialog box,

select Connect using a

broadband connection

that is always on, then

click Next.

e. On the

Completing the

New Connection Wizard

dialog box, click Finish.

a. On the

Internet

Connection Wizard

dialog box, select I want

to set up my Internet

connection manually, or

I want to connect

through a local area

network (LAN), then click

Next.

b. On the

Setting up your

Internet connection

dialog box, I connect

through a local area

network (LAN), then click

Next.

c. On the

Local area

network Internet

configuration dialog box,

uncheck the Automatic

discovery of proxy

server check box, then

click Next.

d. On the

Set Up Your

Internet Mail Account

dialog box select No, then

click Next.

e. On the

Completing the

New Connection Wizard

dialog box, uncheck the

To connect to the

Internet immediately,

select this box… check

box (if it appears) and click

Finish.

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza