Zte MF65M Manuale utente
1
MF65M
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
2
Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. LED Indicators
2. Power Key
3. WPS Key
4. Charging/micro-USB Jack
5. (U)SIM Card Slot
6. microSDHC Card Slot
NOTE:
The microSDHC™ logo is a trademark of SD-3C,
LLC.
3
Getting to Know Your Device
Indicators
When the device is powered on, the following icons may
be lighting. For a description of the icons, refer to the fol-
lowing table.
Indicator Status Description
Network
Red solid
Error status. Not registered to the
mobile network, no (U)SIM card
inserted or no network service
available.
Green
solid
Registered to the mobile net-
work.
Green
blinking
Connected to the mobile network
and data is being transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue
blinking WPS is active.
off Wi-Fi is off or your device is in
sleep mode.
4
Getting to Know Your Device
SMS
Blue solid You have unread messages.
Blue
blinking You have new messages.
off No unread messages.
Battery
Red solid
/ blinking
The battery is low. Please charge
the battery.
Green
blinking
The battery is being charged or
in standby mode.
Green
solid
The battery level is middle or
high.
off Your device is not being charged,
or the battery is not inserted.
5
Getting to Know Your Device
Connection Scenarios
The device can access the Internet in two ways and it
allows multiple clients to surf on the Internet at the same
time. The following gures are for your reference only.
• 3G Mode: A (U)SIM card can be used to access the
Internet.
• Internet Wi-Fi Mode: Your device can be connected
to a WLAN device (such as a hotspot device or wire-
less router) through Wi-Fi to access the Internet. The
WLAN device must be already connected to the Inter-
net.
NOTE: Your device and the WLAN device must be in
different subnets.
6
Getting to Know Your Device
Installing Your Device
1. Slide the back cover and remove it.
NOTE: Do not remove the cover rudely.
2. Install a (U)SIM card to the (U)SIM card slot.
WARNING!
Your device does not support the micro-SIM and nano-SIM
card or any other non-standard SIM cards. To avoid damag-
ing the device, do not use those cards or any card holders.
7
Installing Your Device
3. Install the microSDHC card if necessary.
8
Installing Your Device
4. Install the battery.
5. Close the back cover.
9
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Make sure your computer or other client devices have
enabled Wi-Fi, and search for available wireless net-
works.
NOTE:
Refer to your Wi-Fi-enabled client device manual for
further details on how to search for wireless networks. If
you use a computer, you need to set your computer to
obtain an IP address automatically.
3. Select the Wi-Fi name (SSID) of your device, and
click Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE:
Refer to the chapter Getting to Know the Wi-Fi SSID
and Password to get the default Wi-Fi SSID and pass-
word.
5. Wait until the client device is connected to your de-
vice successfully.
10
Connecting to Your Device
Using a USB Cable
1. Connect a computer to your device with a USB cable.
2. Power on your device. The operating system detects
and identifies new hardware, and automatically in-
stalls the hardware.
NOTE:
If the system does not automatically launch installation,
you can click the device installation icon in My Computer
to install the software.
3. Wait until the computer is connected to your device
successfully.
Getting to Know the Wi-Fi SSID and
Password
You can view the label on the device to get the default
Wi-Fi SSID and password.
Altri manuali per MF65M
5
Indice
Altri manuali Zte Telefono cellulare
Zte
Zte Telstra Lite 2 Manuale utente
Zte
Zte Z5156CC Manuale utente
Zte
Zte Axon 7 Manuale utente
Zte
Zte MF970 Manuale utente
Zte
Zte Movistar Novus Manuale utente
Zte
Zte -J G730 Manuale utente
Zte
Zte V880E Manuale utente
Zte
Zte Overture 3 Manuale utente
Zte
Zte Blade A5 2020-T Manuale utente
Zte
Zte AT&T Z432 Manuale utente
