Zte MF83M Manuale utente
1
ZTE MF83M
Quick Guide
2
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and micro-
lm, without the prior written permission of ZTE Corpora-
tion.
The manual is published by ZTE Corporation. We reserve
the right to make modications on print errors or update
specications without prior notice.
Version No. : R1.0
Edition Time : 7.2013
3
Getting to Know Your Device
Appearance
The following gure is only for your reference. The actual
product may be different.
1. LED Indicators
2. Power Button
3. WPS Button
4. Micro USB Port
5. (U)SIM Card Slot
6. microSD Card Slot
NOTE:
1. microSD logo is a trademark of SD-3C, LLC.
2. You can hold the Power button and WPS button to
reset the device.
4
Indicators
Indicator Status Description
Network
Red solid
Error status. Not registered
to the mobile network, no
(U)SIM card inserted or no
network service available.
Green solid Registered to the mobile
network.
Green
blinking
Connected to the mobile
network and data is being
transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue blinking WPS is active.
LED light off Wi-Fi is off or your device is
in sleep mode.
SMS
Blue solid You have unread messages.
Blue blinking You have new messages.
LED light off No messages.
5
Battery
Red solid/
blinking
The battery is low. Please
charge the battery.
Green
blinking
The battery is being
charged.
Green solid The battery level is middle
or high.
LED light off
Your device is in standby
mode and not being
charged, or the battery is
not inserted.
Connection Scenario
Your device supports two methods to connect to the Inter-
net and supports multi-clients for surng on the Internet at
the same time. The following gure is only for your refer-
ence.
• 3G Mode: Use your (U)SIM card to access the Inter-
net.
6
• Internet Wi-Fi Mode: Your device will connect to
other WLAN device (hotspot device, wireless router,
etc.) via Wi-Fi to access the Internet. The WLAN de-
vice has already connected to the Internet.
NOTE:
The subnets of your device and other WLAN device must
be different.
7
Installing Your Device
1. Slide the back cover and remove it
2. Insert the (U)SIM card.
IMPORTANT: Your device does not support Micro/Nano
or any other nonstandard SIM cards. To avoid device
damage, please do not use them.
8
3. Insert the microSD card if necessary.
4. Insert the battery.
5. Close the back cover.
9
Connecting to Your Device
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes
to initialize.
2. Use your normal Wi-Fi application on the client to
search for the available wireless networks.
NOTE: Please set the client to obtain an IP address
automatically referring to the chapter “Configuring your
PC”, and then the client will get an IP address like
“192.168.0.101”.
10
3. Select the SSID of your device, and then click Con-
nect.
NOTE:
Please check the label on your device to get the default
SSID.
4. Input the password, and then click Connect.
Indice
Altri manuali Zte Telefono cellulare
Zte
Zte C70 Manuale utente
Zte
Zte Blade V40 Design Manuale utente
Zte
Zte GSM Wireless Phone Manuale utente
Zte
Zte Rock Manuale utente
Zte
Zte Z978 Manuale utente
Zte
Zte Blade G Manuale utente
Zte
Zte Grand X In Manuale utente
Zte
Zte Z798BL Manuale utente
Zte
Zte Z955L Manuale utente
Zte
Zte Blade L5 Plus Manuale utente
