Zte A002ZT Manuale utente
1
A002ZT
USB Modem
Quick Start Guide
2
Getting to Know Your
Modem
Your modem supports data services through the
mobile phone network, enabling you to
communicate anytime and anywhere.
The following figure is only for your reference.
The actual product may be different.
3
1. Rotatable USB connector
2. Indicator light
Red
blinking
• There is no nano-SIM card inserted
or the nano-SIM card is damaged.
• The PIN or PUK is enabled.
Red on • The device is just powered on.
• The device is searching for available
networks.
• There is no network service
available.
Green
on
The device is connected to the 2G/3G
mobile network and data is being
transferred.
Green
blinking
The device is registered to the 2G/3G
mobile network.
Blue on The device is connected to the LTE
network and data is being transferred.
Blue
blinking
The device is registered to the LTE
network.
3. nano-SIM card slot cover
4
Installing the nano-SIM
Card
1. Open the nano-SIM card slot cover.
NOTE:
Do not remove the cover rudely, because it is
connected with the device.
2. Install a nano-SIM card to the nano-SIM card
slot.
WARNING!
To avoid damage to the device, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can get
a standard nano-SIM card from your service
provider.
3. Close the nano-SIM card slot cover.
5
Connecting the Modem to
Your PC
Rotate the USB connector and insert the modem
into your computer’s USB port securely. The
operating system automatically detects and
identifies your modem and installs the software
automatically.
NOTE:
If the system does not launch installation
automatically, you can double-click the modem
installation icon in My Computer > ZTEMODEM
to install the software.
6
Logging in to the Device
Manager Website
1. Launch the Internet browser and enter
http://192.168.0.1 in the address bar or click
on your desktop.
2. Click Login and enter the password to log in to
the
Device Manager Website.
NOTE:
View the label on the device to get the default
password.
7
Accessing the Internet
After a client device is successfully connected to
your device, you can access the Internet in Auto
or Manual mode. The default mode is Manual.
Mode Operation
Auto Your device is automatically
connected to the Internet.
To set Auto mode:
1. Log in to the Device Manager
Website.
2. Select Settings > Mobile
Network > Network
Settings > Connection
Mode > Auto, and then click
Save Changes.
Manual 1. Log in to the Device Manager
Website.
2. Select Home, and click
Connect to connect to the
Internet.
NOTE:
To change the current connection setting, please
disconnect from the Internet first.
8
Getting More Help
You can get help by:
Sending an email to [email protected]
Visiting www.ztedevices.com
9
LEGAL INFORMATION
Copyright © 2020 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted,
reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including
photocopying and microfilm, without the prior written
permission of ZTE Corporation.
The manual is published by ZTE Corporation. We
reserve the right to make modifications on print errors
or update specifications without prior notice.
Version No.: R1.0
10
Warning and Notice
Using Your Modem
If inadequately shielded, some electronic devices
may be affected by the electromagnetic
interference caused by the modem, such as the
electronic system of vehicles. Consult the
manufacturers of such devices before using the
modem if necessary.
Operating the modem may interfere with medical
instruments such as hearing aids and pacemakers.
Always keep the modem more than 20
centimeters away from such medical instruments
when your modem is turned on. Turn the modem
off if necessary. Consult a physician or the
manufacturers of medical instruments before
using the modem if necessary.
Be aware of the usage limitation when using the
modem at places such as oil warehouses or
chemical factories, where there are explosive
gases or explosive products being processed.
Turn off the modem if necessary.
Do not use electronic transmission devices in
aircrafts, at petrol stations or in hospitals. Observe
and obey all warning signs, and turn off the
modem in these conditions.
Do not touch the inner antenna area unless it is
Altri manuali per A002ZT
1
Indice
Altri manuali Zte Modem
Zte
Zte ZXHN H108N Foglio di istruzioni
Zte
Zte MF681 Manuale utente
Zte
Zte MF190J Manuale utente
Zte
Zte MF823 Manuale utente
Zte
Zte AX326 Manuale di istruzioni
Zte
Zte MF636 Manuale di istruzioni
Zte
Zte MF195 Manuale utente
Zte
Zte ZXDSL 831C Manuale utente
Zte
Zte MF636 Manuale utente
Zte
Zte ZXDSL931WII Manuale utente
Manuali Modem popolari di altre marche
Davicom
Davicom DM562AP Manuale utente
EpiValley
EpiValley TATA indicom SXC-1080 Manuale utente
Intelimax
Intelimax MA-2060 Manuale utente
SMC Networks
SMC Networks D3CM1604V Manuale per l'uso e la cura
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuale utente
Thrane&Thrane
Thrane&Thrane imarsat EXPLORER 300 Manuale utente
