Zte MF636 Guida all'installazione

ZTE Rogers

MF636 USB Modem

Quick Start User Guide

www.ztecanada.com

© ZTE Corporation, 2008.

-1-

1. Insert the SIM Card into the modem

The SIM slot is located above the

USB connector

Before using the modem make sure the SIM

card supports data services. Insert the SIM

card as shown with the gold contacts facing

down and the beveled edge on the left hand

side.

Push the SIM card in as far as it will go.

2. Connect the USB modem to your PC

Connect the modem to your PC’s USB port directly. You may alternatively use the

supplied USB cable. In most cases the single cable should suffice. However, to

increase the power delivered to the modem, use the double USB cable if required.

After the modem is connected, your PC will launch the installation application

software automatically.

Note: If your security settings preventAutorun then you will have to start the process

manually. Navigate to the CDROM and double click the Autorun.exe file to start the

software installation

-2-

3. First Time Software Installation

Select your language and click OK.

-3-

First Time Software Installation Continued…

Click Next to continue.

-4-

First Time Software Installation Continued…

Read the license agreement, select I accept the terms of the license agreement

and press Next.

-5-

First Time Software Installation Continued…

Click Next to accept the default installation location or press Change to specify your

own path.

-6-

First Time Software Installation Continued…

The wizard will take a few minutes to install software. Click Finish to complete.

-7-

4. Using your Modem

Connect your modem to the computer. Your computer will launch the Connection

Manager application automatically. The modem will initialize and the main user

interface will appear.

-8-

Using your Modem Continued…

Click the Internet button and then click Connect to establish a connection to the

internet.

5. Removing the Modem Safely

Please close the application software first, use the Safe Hardware Removal

procedure and then pull out the modem or USB cable.

-9-

6. LED Indicator

LED Indicator USB Modem Working Status

Yellow Power on. Not registered on the 2G or 3G network

Green Solid Registered on the 2G network.

Green blinking Active data transfer on the 2G network

Blue solid Registered on the 3G network.

Blue blinking Active data transfer on the 3G network.

Red solid Roaming status

Red blinking Active data transfer in roaming status

7. Functions & Operation

Connects to the internet.

Messages Interface

View your Contacts

Opens the Rogers Home Page

Change system settings

View the Help file

-10-

Altri manuali per MF636

5

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Zoom

Zoom 1070 Series Manuale utente

Aztech

Aztech HW831 Manuale utente