Zte Telstra MF90 Manuale utente

Altri manuali per Telstra MF90

6

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Zoom

Zoom 1070 Series Manuale utente

Aztech

Aztech HW831 Manuale utente

1

ZTE MF90

Let’s go

Getting started with your device.

2

LEGAL INFORMATION

Copyright © 2014 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photocopying and microlm, without the prior written per-

mission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right

to make modications on print errors or update specications with-

out prior notice.

Version No. : R1.0

Edition Time : 01.2014

NOTE:

Do not use the device in an enclosed environment or where heat

dissipation is poor. Prolonged work in such space may cause ex-

cessive heat and raise ambient temperature, which may lead to au-

tomatic shutdown of the device for your safety. In the case of such

event, cool the device in a well-ventilated place before turning on

for normal use.

3

Getting to Know Your Device

Appearance

The following gure is only for your reference. The actual product

may be different.

1. LED Indicators

2. Power Button

3. WPS Button

4. Micro USB Port

5. (U)SIM Card Slot

6. RESET Button

7. microSDHC Card Slot

NOTE:

microSDHC logo is a trademark of SD-3C, LLC.

4

Indicators

Indicator Status Description

Network

Red solid

Error status. Not registered to the

mobile network, no (U)SIM card in-

serted or no network service avail-

able.

Green solid Registered to the 2G/3G network.

Green

blinking

Connected to the 2G/3G network

and data is being transferred.

Blue solid Registered to the 4G network.

Blue blinking Connected to the 4G network and

data is being transferred.

Wi-Fi

Blue solid WPS is active.

Blue blinking Wi-Fi is active.

LED light off Wi-Fi is off or your device is in

sleep mode.

5

Battery

Red blinking The battery is empty. Please

charge the battery.

Red solid

• The battery is low. Please charge

the battery.

• The battery is in the over-volt-

age charging status.

Green

blinking

• Blinks every 2 seconds when

the battery is being charged.

• Blinks every 8 seconds when

your device is in sleep mode

and not being charged.

Green solid The battery level is middle or high.

LED light off

Your device is in sleep mode and

not being charged, or the battery is

not inserted.

6

Connection Scenario

Your device supports two methods to connect to the Internet and

supports multi-clients for surng on the Internet at the same time.

The following gure is only for your reference.

• 4G Mode: Use your (U)SIM card to access the Internet.

• Internet Wi-Fi Mode: Your device will connect to other WLAN

device (hotspot device, wireless router, etc.) via Wi-Fi to ac-

cess the Internet. The WLAN device has already connected to

the Internet.

NOTE:

The subnets of your device and other WLAN device must be differ-

ent.

7

Installing Your Device

1. Slide the back cover and remove it

8

2. Insert the (U)SIM card.

IMPORTANT: Your device does not support Micro/Nano SIM card

or any other nonstandard SIM cards. To avoid device damage,

please do not use them or any card holders.

3. Insert the microSDHC card if necessary.

4. Insert the battery.

9

5. Close the back cover.

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly.

2. Use your normal Wi-Fi application on the client to search for

the available wireless networks.

10

NOTE: Please set the client to obtain an IP address automatically

referring to the chapter “Conguring your PC”, and then the client

will get an IP address like “192.168.0.101”.

3. Select the SSID of your device, and then click Connect.

NOTE: Please check the label on your device to get the default SSID.

4. Input the password, and then click Connect.