Zte MC801A1 Manuale utente
MC801A1
Let’s go
Getting started with your device.
2
1. Prepare
A valid nano-SIM card.
View the label on your device to get the default information. The
3
2. Insert the nano-SIM Card
Open the slot cover at the bottom of the device and insert the nano-SIM
card.
4
3. Power on Your Device
Connect the power adapter to your device and then your device will be
powered on and connect to the Internet automatically.
5
4. Access the Internet
Wi-Fi: Get the default SSID and password on the label and connect
to the Wi-Fi network with your mobile device, and then access the
Internet.
6
Network cable(RJ45): Connect with the computer via LAN ports
and then access the Internet.
7
5. Change Your Device Settings
You can change the device settings by logging in to the 5G CPE
1. View the label on your device to get the default Device Manager
Website IP address and Password.
2. Launch the Internet browser and enter the Device Manager Website
IP address in the address bar.
3. Input the password and then click Login.
change the Wi-Fi SSID, password or other settings.
8
Internet Wi-Fi Function
Your device supports the Internet Wi-Fi function and you can use this
function to extend your existing Wi-Fi network.
2. Select Wi-Fi Settings > Internet Wi-Fi.
3. Set the Internet Wi-Fi Switch to Enable, and click Apply.
4. Connect to the Wi-Fi hotspot.
Select a Wi-Fi hotspot listed in the Wi-Fi Hotspot area and click
Connect. Enter a password in the Password text box and click
Yes.
Add Network, enter the Wi-Fi hotspot information in
the Add Wi-Fi Hotspot area, and click Apply. Click the Wi-Fi
hotspot you have added and then click Connect.
5. After the device is connected to the Wi-Fi hotspot successfully, you
can access the Internet.
9
Bridge Mode
Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
3. Change the operation mode to Bridge Mode and select the WAN
connection network port. The device will be restarted automatically.
NOTE:
mode.
4. Connect the computer or other cable-connected client to the LAN
port you selected and the client can obtain the IP address from the
WAN DHCP host and connect to the Internet directly.
NOTE:
The cable-connected client connected to the other LAN port or the Wi-
Fi connected clients cannot visit the Internet, but they can communicate
with each other. If you want to change the operation mode, you can use
10
Cable Broadband Mode
Your device supports the cable broadband mode and you can use this
service from your service provider to access the Internet.
1. Connect either of the two LAN ports and the broadband service
network port with a network cable.
3. Change the operation mode to Cable Broadband Mode.
NOTE:
mode.
4. Set the detailed parameters given by your service provider.
5. Use your clients to access the Internet.
Indice
Lingue:
Altri manuali Zte Router di rete
Zte
Zte MF286D Manuale utente
Zte
Zte Avid 4G LTE Manuale utente
Zte
Zte mf910l Manuale utente
Zte
Zte ZXR10 ZSR Istruzioni per il montaggio
Zte
Zte ZXR10 5900E Series Manuale utente
Zte
Zte ZXR10 3800-8 Istruzioni per l'installazione
Zte
Zte WiFi MF20 Manuale utente
Zte
Zte MF65 Manuale utente
Zte
Zte E1200 Manuale utente
Zte
Zte ZXV10 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza