Zumimall ZS-GX2S Manuale utente
WIRELESS 丨OUTDOOR 丨WATERPROOF 丨Wi-Fi
GX2KPAN TILT BATTERY CAMERA
Get Smarter About Your Security
Thanks for your shopping and trust.
We are keeping to optimize product and improve our lifetime customer
service to offer you a better shopping experience. If you have any
problems, please feel free to send us an E-mail. We will solve your
problems within 24 hours. Besides, your advice or suggestions will be
much appreciated and welcomed.
Register via link below to get 3 Years Warranty Extension.
http://bit.ly/zuReg
Product Service
Email: [email protected]
Distributor: [email protected]
More About Us
Web: www.zumimall.com
Facebook: www.facebook.com/zumimalloffice
Amazon Store: www.amazon.com/zumimalls
Warranty Service
1. What’s in the Box ------------------------------------------------P1
2. Product Diagram ------------------------------------------------P2
3. Download & Install App ----------------------------------------P3
4. Connect Camera to App ---------------------------------------P4
5. Camera Installation ---------------------------------------------P5
6. Important Notes -------------------------------------------------P5
7. Device Menu -----------------------------------------------------P6
8. PIR Body Detection ----------------------------------------------P7
8.1 Body Detection Alarm Setting -----------------------------P7
8.2 Alarm Notifications -----------------------------------------P7
9. Power Saving Settings -------------------------------------------P8
9.1 Alarm Interval & Shooting Interval ------------------------P8
9.2 Maximum Shooting Time & Recording Time ------------P8
9.3 Alarm Plan ---------------------------------------------------P9
10. Battery Management ----------------------------------------P10
11. Multi User Sharing -------------------------------------------P11
12. Reset Camera ------------------------------------------------P12
INDEX PAGE
1. What’s in the Box
1
NOTE: Micro SD card and power adapter are not included.
1 ZS-GX2S Camera
1 USB Cable
1 Solar Panel with Cable
1 User Manual
1 Metal Mount
1 Screw Set
WIRELESS 丨OUTDOOR 丨WATERPROOF丨Wi-Fi
GX2KPAN TILT BATTERY CAMERA
Get Smarter About Your Security
2. Product Diagram
Power Button
Reset Button
Blink Slowly in Red
Blink Fast in Red
Solid in Red
Solid in Blue
Blink Slowly in Blue
Keep pressing for 5-10 seconds to power on/power off
Keep pressing for 5-10 seconds to reset
Awaiting Wi-Fi connection, ready for adding devices
Wi-Fi connecting
Network problem
Wi-Fi connected, camera running normally
Firmware update
2
Lens Mode Indicator
Power Light
Microphone
PIR Sensor
Wi-Fi Antenna
USB Charge Port
Thumb Screw
Speaker
SD Card Slot
Reset Key
Power Key
DC 5V
Power Reset
Download ZUMIMALL App from Google Play™ or App Store™.
Or scan the QR codes as below, with your smart phone.
NOTE: Google Play™ is a trademark of Google Inc.
App Store™ is a service mark of Apple Inc.
NOTE: Please turn on both of the following permissions.
① Allow ZUMIMALL App to access mobile cellular data and wireless LAN, otherwise it will
fail to connect the camera.
② Allow ZUMIMALL App to receive pushed messages, otherwise, the phone will not
receive alarms when motion is detected.
3. Download & Install App
ZUMIMALL AndroidiOS
>
>
<
Notifications
ZUMIMALL
ALERTS
Allow Notifications
9:41
Lock Screen
Banner Style
Sounds
Badges
OPTIONS
When Unlocked(Default)
Show Previews
Temporary
>
>
Automatic
Notification Grouping
>
NotificationCenter Banners
5:51
<
ZUMIMALL
Wireless Data
ALLOW”WIRELESS DATA”TO USE DATA
Off
WLAN
WLAN & Cellular Data
5:51
3
4. Connect Camera to App
5:48
Devices
Devices Messages
Tap + to add a new device.
Me
5:48
Camera
Select Device
Get Smarter about your Smart Security
Battery Camera
Doorbell
Tap '+'to Add Device Select 'Battery Camera'Tap 'Next'Reset it and Tap 'Next'
5:49
Add Battery Camera
Press the [battery camera] button to wake the
device if it is asleep.
Hold the device power button to start the
device.
<
4
Please stay near to your router foe the best
signal.
Next
Hole the RESET button on your device for 4-5
seconds(please refer to the usea manual for
more on this).
Wait for a flashing RED indicator light.
Tap Next
5:49
Add Battery Camera
Please reset the device.
<
Next
Input Wi-Fi Password Prepare the Scanning Scan QR Code When Indicator
Flashing Slowly in Red Finished Installation
When Reaches 100%
5:50
Wi-Fi Setup
Select your Wi-Fi network
(Please select a 2.4G network, this device will
not work with 5G Wi-Fi networks)
Junan
cam2019@
Change WiFi
Hide Password
<
Next
5:50
Scan QR Code
<
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Nctificati...ne heard.
5:50
Connect Network
<
Please place the camera & phone
close to your router for the best
signal.
Device Found!
Connecting the device to the network...
Registering device...
12%
connecting...
Please remove all film from the lens.Tap
Next to show a QR code, and let your
device scan the code. Keep your phone 5-8
inches from the lens.
5:50
Operation instructions
<
Next
— — — — — — — — — — — — — — — —
15~25cm
5~5 in
4
5. Camera Installation
To reduce false alarms, please note that:
① Do not install the camera in a position facing strong lights/mirror/window/swimming
pool.
② Do not place the camera too close to any angel with busy traffic.
Recommended distance between the camera and motion objects is within 32ft (10m).
③ Keep camera away from the outlets, including air conditioner vents, humidifier outlets,
the heat transfer vents of the projectors, etc.
④ Keep the camera at least 1 meter away from any wireless devices to avoid interference,
such as microwave stove, Wi-Fi routers and etc.
6. Important Notes
5
①Choose a dry, clean, flat surface(Recommend attaching directly on a wooden wall;
avoid uneven wooden and stucco walls).
② Drill holes in the wall and fasten the camera with screws.
③ Rotate the camera to a proper angle.
-------------------------
15°
7. Device Menu
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Device List
Add Camera
Real Time
Live View Button
Camera Name
History Playback
Cloud Storage
Messages
My Device List
Personal Homepage
Quit Live Viewing
Setting Manual
Battery Status
HD/SD Switch
Volume On/Off
Full Screen
Preview
Screenshot Button
Body Detection On/Off
Notification History
Cloud Storage
Record to Phone
Two-Way Talk
Zoom
Time Bar
PTZ
Alarm Record Album
Date of History Record
5:51
Devices +
Devices Messages Me
060238708
2020-10-08 14:50:10
12
4
6
7
10
3
5
8
9
5:51
060238708
Bit Rate:10.74KB/s WiFi:97%
2020-10-08 15:30:10
HD
Live
Screenshot
Motion Detection
Intercom Record
History Cloud
<
11 12
13
14
16
20
21
22
23
19
18
17
15
5:51
060238708
2020-9-14 15:30:10
Live
Screenshot
Alert
Record
History Cloud
<
Calendar
14:00 15:00 16:00
27
28 26
25
24
6
PTZ Album PTZ Album
This camera does not support 7*24 hours all day recording, it is an event recording
camera. It is only triggered when body motion is detected. Here are system's reactions:
① Alarm notifications with sounds from App.
② Pictures/videos automatically stored in Micro SD Card or Cloud.
8.2 Alarm Notification
PIR Body Detection defaults to be on
'
High
'
level. But it is adjustable.
Please refer to the pictures below.
8.1 Body Detection Alarm Setting
8. PIR Body Detection
Sensitivity
LOW: 1-3
MID: 4-7
HIGH: 8-10
NOTE: The higher the sensitivity is, the longer distance the PIR can detect. Accordingly, the battery will
drain faster.
Detecting Distance (For moving and living objects)
13-16ft（4-5meters）
16-23ft（5-8meters）
23-42ft（8-13meters）
Tap on
'
...
'
Set it upSelect
'
Motion Setting
'
5:51
060238708
Bit Rate:10.74KB/s WiFi:97%
2020-10-08 15:30:10
HD
Live
Screenshot
Motion Detection
Record
History Cloud
<
Intercom
5:51
Settings
<
Receive Alert Notifications
Device Share
>
Device Information
>
Installation Guide
>
Basic Function
>
Power Saving settings
>
Motion Detection
>
Recording management
>
Device Version
Delete the Device
>
Cloud Storage Service
>
Album
5:50
Motion Detection
Motion Detection
After turning it on,you can montior the human behavior who
stands in front oh the device and send alarms. it is possible
to choose different detection sensitivities.
After Detection sensitivity is supported to select from 1 to 10,
Higher the value, easier to trigger the motion detection and
alarm.turning it on,you can montior the human behavior who
stands in front oh the device and send alarms. it is possible
to choose different detection sensitivities.
Set the time period of th alarm, the device only triggers an
alarm event during this time period
Time Setting
<
Off
2 minutes
5 minutes
The Alert will be triggered only when
human motion is detected.
Day Detection
Night Detection
10 minutes
Detection sensiticity
Alarm interval
Alert Plan
<
1 2 3 4 5 6 7 8 9 10
7
PTZ
Indice
Lingue:
Altri manuali Zumimall Telecamera di sicurezza
Zumimall
Zumimall F5K Manuale utente
Zumimall
Zumimall GX1C Manuale utente
Zumimall
Zumimall GX2K Manuale utente
Zumimall
Zumimall X1K Manuale utente
Zumimall
Zumimall BF-BK04 Manuale utente
Zumimall
Zumimall A3K Manuale utente
Zumimall
Zumimall F5 Manuale utente
Zumimall
Zumimall ZM-6S Manuale utente
Zumimall
Zumimall GX2S Manuale utente
Zumimall
Zumimall A3P Manuale utente
