ZWO ASI071MC Pro Manuale utente

ZWO

ASI Cooled Camera

Quick Guide

苏州振旺光电有限公司

Suzhou ZWO Co.,Ltd.

Thank you for purchasing a ZWO ASI camera. This guide is brief summary of the

installation procedure to get you up and running with your new camera. Please be sure

to read the user manual for more complete instructions.

Driver and software installation(Windows)

1. Download and install ASI Camera driver from our website1or the

CD-ROM that came with your camera.

After plugging in the camera, you will see your ZWO camera model

listed under the “Imaging devices” category of the Device Manager if the

driver is installed successfully.

NOTE: To open device manager in windows, you may use one of the

following methods:

a) All Windows: Open Control Panel; Find and open Hardware and

Sound; Find and open Device Manager.

b) Windows 8/10: Right-click Start menu; Find Device Manager and

click to open.

c) Click “Start”menu and click “Run”( or press “WIN+R”key ); Type

devmgmt.msc and choose OK.

2. Download and install SharpCap (capture software) from our website or

CD-ROM. Choose your camera model from the camera menu. Then

you can see the preview video. Keep in mind that you will only see

some brightness in the preview video without lens or telescope.

3. Download and install ASCOM driverfrom our website1or CD-ROM.

Important note:Please install newest ASCOM Platform2first!

Then you should install theASI cameraASCOM driver:

4. Download one of various imaging software programs from our website

That’s all! You are ready to use your ASI camera to begin imaging the

night sky, including planetary objects as well as deep sky objects(DSO).

To learn more about your camera, you may find a more detailed user

manual can be found at our website:

https://astronomy-imaging-camera.com/manuals/

Definations:

website1: https://astronomy-imaging-camera.com/software/

ASCOM Platform2:http://ascom-standards.org/

Camera ports

Cooler power supply: Cooler and fan need an

external power supply. We recommend at least a

12V@3AAC-DC adapter or battery from 9-15V is

also suitable.

Connector standard: 2.1*5.5mm, center positive.

USB3.0 Port:

Connect to your computer

USB 2.0 Hub:

Connect to a guide camera

or EFW

Chamber seal screw:

Do not open it.

LED: Power on

Connecting the camera to the telescope

Color camera connection diagram (depicted without EFW):

Mono camera connection diagram (depicted with EFW, OAG& Guide

camera):

Additional options are available to adapt ASI cooled cameras to different

apertures, interfaces and thread standards:

1. 1.25” nose-piece

6. M42 21mm extender

2. 1.25” filter (optional)

7. OAG

3. M42-M48 adapter

8. Focal reducer (optional)

4. T2 extender 11mm

9. M42-M42 adapter(male to male)

5. M42-M48 16.5mm extender

10. ZWO EFW

Controlling your camera through ASCOM

ASCOM is a standard platform for astronomy software, many astronomy

imaging programs support ASCOM. When you want to use ASCOM to

control the camera, the ASCOM Platform(6.2 or newer) must first be

installed. After you have installed the ASCOM Platform, you may then

install the ASI Camera ASCOM driver.

There are two ASI cameras that can be chosen in setup dialog. Please

select “ASI Camera(1)”for main camera and “ASI Camera(2)”for guide

camera, if you need to control two ASI cameras simultaneously for

imaging and guiding.

For a single-camera setup, you can just use “ASI Camera(1)”to setup

your ASI camera.

In the ASCOM settings dialog, we provide 3 different gain and offset

settings for DSO imaging:

Highest Dynamic Range and Unity Gain and Lowest Read Noise

You can add own presets if you wish as well (select the “…” option):

You can select a predefined setting depending on your conditions.

Then press “Set”button to apply the preset and press “OK”to save the

settings.

The Highest Dynamic Range setting gives better results with longer

exposures, as well as with brighter (light polluted) skies. This setting

avoids saturated stars, provides good SNR and very low read noise.

If you preferred shorter exposures with the lowest possible read noise,

for narrow band imaging and play “lucky imaging” techniques, or because

of mount tracking limitations, we recommend the Lowest Read Noise

setting.

Trouble shooting problems with your ASI camera

Q: Why is my camera cooler not working?

A: Please check and verify that a 12V DC power cable is connected and

the red LED is on. This power cable may come from an AC-DC adapter, or

a 9V-15V battery, and the connector must be a 2.1x5.5mm center

positive standard.

The red LED indicates that the external power supply works.

The fan will only be running when you enable the camera cooler in

compatible software. The fan will not run when the cooler is not powered

and running.

Q: Why is the preview screen completely white but the FPS appears to be

normal? (in SharpCap)

A: If you can see the fps meter in SharpCap change over time, then the

camera is most likely operating correctly. This issue may occur because

the camera is overexposing. You must reduce the exposure setting or

reduce the gain setting, until you can see the image from the camera.

Questo manuale è adatto per i seguenti modelli

5

Indice

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente