ZyXEL Communications MAX208M Manuale utente

.com www.zyxel.com

WiMAX Indoor Gateway

Software Version 2.00

Edition 1, 2/2011

MAX208M

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

Admin’s User

Name and

Password:

admin / 1234

Guest’s User

Name and

Password:

guest / guest

ZyXEL Communications Corporation

LEDs and Ports

STRENGTH

POWER LED

WIMAX

INDICATORS

POWER SOCKET

LAN PORT

RESET BUTTON

ANTENNA

LINK LED

ENGLISH

Introduction

Your MAX208M lets your computer connect wirelessly to the Internet at

broadband speeds.

How It Works

A computer connects to the MAX208M (A). The device then connects

wirelessly to a WiMAX base station (B), which connects to the Internet.

Package Content

System Requirement

The computer you will use to access the device’s Web Configurator must

meet the following minimum requirements:

• 64 MB RAM

• 20 MB of available hard disk space

• One available 10/100 Mbps Ethernet port

• Internet Explorer 6, Firefox 1.5 and higher, or a compatible browser

The WiMAX Modem The Quick Start Guide The Warranty Card

ZyXEL Support Disc

containing the User’s

Guide and device

drivers

12V DC Adapter, provided

with the device

RJ-45 Ethernet cable to

connect a computer to the

MAX208M

ENGLISH

Setting Up Your Modem

This section shows you how to set up your WiMAX Modem.

Connecting the Antennas

Attach the external antennas to their connectors as follows:

Hardware Connections

You will need a valid WiMAX account to connect to the Internet.

1. Connect the Power Adapter. During start up, the Power LED blinks

as the MAX208M self-tests, then it shines a steady green.

2. Connect one end of an RJ-45 Ethernet cable to one of the LAN

ports, and the other end to the computer that you intend to connect to

the Internet. Once connected to the LAN, the LAN LED shines a

steady green. It blinks when there is activity.

Placing the MAX208M

When you are placing the MAX208M, be careful of the following:

ENGLISH

• Place the MAX208M indoors in an area free of moisture and

excessive humidity and/or heat.

• Keep the MAX208M away from other wireless devices, cordless

phones, microwave devices, or radio transmitters as they may

interfere with its connections.

• Keep the MAX208M free of obstruction.

Connecting to the Internet

This section shows you how to connect to the Internet with your

MAX208M.

1. Check your MAX208M’s WiMAX Link LED.

• If everything is connected properly and a WiMAX base station is

within range, then the WiMAX Link LED shines a steady green,

indicating a stable connection. The Strength Indicator LEDs will

turn on to show the signal strength as follows: LED 1 - low strength

signal; LEDs 1 and 2 - medium strength signal; LEDs 1, 2 and 3 -

high strength signal. If the signal strength is low or medium, you

can try to adjust the position of the device to increase the strength.

Go to step 2.

• If the WiMAX Link LED is blinking, then the MAX208M is

undergoing a self-test. If it turns a steady green shortly thereafter,

this indicates a stable connection. Go to step 2.

• If the WiMAX Link LED remains off or continues blinking, you will

not be able to connect. See the User’s Guide for more

troubleshooting steps.

2. Open a web browser.

• If your service provider’s WiMAX login page appears instead of

your default Home page, enter the login information that you were

given and follow the on-screen instructions. The MAX208M should

then automatically update itself with the settings that you need to

connect to the Internet.

• If your service provider’s WiMAX login page does not appear, then

you may need to manually set up the Internet connection (next

section).

Internet Connection Setup

This section shows you how to manually configure the MAX208M’s

Internet connection.

1. Open a web browser and enter http://192.168.1.1 in the address bar.

2. Enter the default User Name and Password (see the cover page of

this guide), and then click Login.

ENGLISH

3. The System Status screen appears. Click on the Setup Wizard

button, located on the upper right corner of the screen.

4. When the Setup Wizard opens, review the steps you will take to

configure your MAX208M then click Next to continue.

Follow the wizard until all the steps are completed. The LAN and WiMAX

setting required by the Setup Wizard should be given by your service

providers.

5. LAN Settings: Configure the network settings that allow devices

connected to your MAX208M to get on the Internet or connect to

other network services. Then Click Next.

Altri manuali per MAX208M

Indice

Altri manuali ZyXEL Communications Portale

ZyXEL Communications

ZyXEL Communications Prestige 653HWI series Manuale utente

ZyXEL Communications

ZyXEL Communications VMG3925-B10A Manuale utente

ZyXEL Communications

ZyXEL Communications P-663HN-51 Manuale utente

ZyXEL Communications

ZyXEL Communications G-4100 v2 Manuale utente

ZyXEL Communications

ZyXEL Communications LTE3301 Series Manuale utente

ZyXEL Communications

ZyXEL Communications ZyAIR G-4100 Manuale utente

ZyXEL Communications

ZyXEL Communications VMG5313-B10A Manuale utente

ZyXEL Communications

ZyXEL Communications N VDSL2 Manuale utente

ZyXEL Communications

ZyXEL Communications G-4100 v2 Manuale utente

ZyXEL Communications

ZyXEL Communications P-794H Manuale utente

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Manuale utente

ZyXEL Communications

ZyXEL Communications P-2302HWUDL-P1 Series Manuale utente

ZyXEL Communications

ZyXEL Communications PRESTIGE 2302RL - Manuale utente

ZyXEL Communications

ZyXEL Communications NBG-510S Manuale utente

ZyXEL Communications

ZyXEL Communications AMG1202-T series Manuale utente

ZyXEL Communications

ZyXEL Communications P-793H 601156 Guida di riferimento

ZyXEL Communications

ZyXEL Communications AMG1001-T Series Manuale utente

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Manuale utente

ZyXEL Communications

ZyXEL Communications PK5001Z Manuale utente

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manuale utente

ZyXEL Communications

ZyXEL Communications UAG2100 Manuale utente

ZyXEL Communications

ZyXEL Communications UAG5100 Manuale utente

ZyXEL Communications

ZyXEL Communications 2R-P1C Manuale utente

ZyXEL Communications

ZyXEL Communications P-2304R-P1 Series Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

RTA

RTA 460MCBC-N2E Scheda tecnica