The Model I provides 4 pins power
supply input terminal blocks and two
independent DC power supply
systems of PWR1 and PWR2. The
power supply supports nonpolarity
and anti-reverse connection. It can normally operate after
reverse connection. Power supply range: 12～48VDC
Model Il: AC power supply
The Model II provides 4 pins power
supply input terminal blocks and 1
AC power supply system. Power
supply range: 100～240VAC
Model Ill: DC power supply
The Model III provides 4 pins power
supply input terminal blocks and two
independent DC power supply
systems of PWR1 and PWR2. The
power supply supports nonpolarity
and anti-reverse connection. It can
normally operate after reverse connection. Power supply
range: 12～48VDC
【Checking LED Indicator】
This device provides LED indicators to monitor device’s
operating states, which has simplified the process of
troubleshooting comprehensively. The detailed status of each
LED is described in the table as below:
Model I and Model II
RUN
ON The device is powered on or
OFF The device is not powered on
Blinking
Blink once per second, the
device is running normally
Link/Act
ON The Ethernet
port has
established valid network
Blinking The Ethernet port is in an
OFF The Ethernet
established
Model III
PWR ON PWR is connected and
OFF PWR is disconnected and
5-6
ON The Port 5-6 has
established valid network
connection
Blinking The Port 5-6 is in an active
OFF The Port 5-6
has not
established valid network
connection
RJ45
LED
(1-4)
10/100M ON The Port 1-4 is in 100M
OFF The Port 1-4
Link/
ACT
ON The Port 1-4 has
established valid network
connection
Blinking The Port 1-4 is in an active
OFF The Port 1-4
has not
established valid network
connection
【Specification】
Gigabit fiber port 1000Base-FX, optional
100M copper port 10/100Base-T(X), self-adaptive
RJ45 port, self-adaptive full/half
duplex, support MDI/MDI-X
Indicator
Power indicator, running
indicator, interface indicator
Input power supply
DC dual power supply
device
Power supply range: 12~48VDC
Power protection: dual power
redundancy backup,
anti-reverse connection
AC single power supply
device
Power supply range:
100~240VAC
Access terminal 4-core 7.62mm
Model I No-load: 3.8W@24VDC
Full-load: 5.5W@24VDC
Model II No-load: 4.4W@220VAC
Model III No-load: 5.9W@24VDC
～
℃
～
℃
～
