4IPNET OWL400 Manuale utente

OWL400/410

V1.00

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 1 -

This document is protected by U S A copyrig ht l a w s a nd other l a w s a nd is the property of

4 I P N E T, I N . Y ou ma y not copy, reproduce, distribute, publ ish, displ a y, perf orm, or

modif y a ny pa rt of this publ ica tion in a ny f orm or by a ny mea ns w ithout prior w ritten

permission f rom 4 I P N E T, I N . Y ou ma y not a l ter or remov e a ny copyrig ht or other notice

f rom copies of the content. Al l other bra nd a nd product na mes a re cl a imed or

reg istered ma rk s of their respectiv e compa nies or org a niz a tions.

Al l rig hts reserv ed.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 2 -

Preface Pack ag e C o n t en t s

The 802.11 n/a compliant OWL400/410 is a Long

Range Outdoor AP/ Bridge/ CPE device that can be

used for dual purposes. First, it can be deployed as

a traditional fixed wireless Access Point (AP).

Secondly, it can be used as a Customer Premises

Equipment (CPE) that connects to the outdoor

wireless network of Wireless Internet Service

Provider (WISP).

The metal sealed OWL400/410 is compact in size

and weatherproof. Coming with a mounting kit, it

can be mounted on a pole or wall. It is suitable for

both indoor and outdoor usage with its 200mW

output power, which is higher than a typical indoor

AP (100mW).

This Quick Installation Guide (including FAQ

Instruction Guide) provides instructions for getting

started with OWL400/410.

1. OWL400/410 x 1

2. Quick Installation Guide (QIG) x 1

3. CD-ROM (with User’s Manual and QIG) x 1

4. Power Sourcing Equipment (PSE) with

AC cable x 1

5. Mounting Kit x 1

It is recommended to keep the original

packing material for possible future shipment

when repair or maintenance is required. Any

returned product should be packed in its

original packaging to prevent damage during

delivery.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 3 -

System Overview

OWL400

1 Power Green LED ON indicates power on, and OFF indicates power off

2 WLAN Green LED ON indicates system ready

3 LAN Green LED ON indicates connection; BLINKING indicates

transmitting data; OFF indicates no connection

4 PoE Connector For connecting to the Power Sourcing Equipment (PSE)

5 Reset Press more than 5 seconds and release to reset the system to its

default settings

6 Primary N-type Antenna

Connector For connecting to an antenna

7 N-type Connector For connecting to an antenna

Note:

Reset Back to Factory Default:

Unscrew the screw beside the PoE hole. Press and hold the button for seconds. You can

use a toothpick to help you reach the button.

The system is meant to be used in only one mode at a time. Before you start with any

configuration, you should first decide which mode to use it in. Please prevent constant

switching from one mode to another during usage as it is easy for users to misconfigure the

settings.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 4 -

OWL410

1 Power Green LED ON indicates power on, and OFF indicates power off

2 WLAN Green LED ON indicates system ready

3 LAN Green LED ON indicates connection; BLINKING indicates

transmitting data; OFF indicates no connection

4 PoE Connector For connecting to the Power Sourcing Equipment (PSE)

5 Reset Press more than 5 seconds and release to reset the system to its

default settings

6 Built-in patch antenna 10 dBi (Horizontal: 110 degree; Vertical: 60 degree)

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 5 -

H a rd wa re I n sta l l a tio n

OWL400/410

The following diagram is a basic network topology which can be used for testing and configuring the

OWL400/410.

Installation Steps:

Step 1. Connect the antennas to the connectors.

Step 2. Connect the PSE (POWER & DATA OUT) to the PSE 1 connector on the lower panel.

Step 3. Connect one end of an Ethernet cable to the PSE 2 connector on the lower panel and the other end

to a computer.

Step 4. Connect the power cord to the PSE.

Step 5. Power on the PSE in order to supply power to the OWL400/410.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 6 -

G ettin g Sta rted

4ipnet OWL400/410 supports web-based configuration. OWL400/410 is a dual-mode system, AP Mode as the

default mode for the first time entering the system, which also can be configured as either an access point (AP

Mode) or a gateway (CPE Mode) based on your needs. It is required to follow the respective installation

procedures provided to properly set up the desired mode for this system.

•Default IPAddress of Web Management Interface:

The default IP address and Subnet Mask for the AP mode and CPE mode are as follows:

Mode AP Mode CPE Mode

IP Address 192.168.1.1 192.168.1.1

Subnet Mask 255.255.255.0 255.255.255.0

•Default User Name and Password:

There is only one management account for AP mode, root. In addition, there are two system management

accounts for CPE mode to maintain the system, root and admin, and each has different levels of management

capabilities. The root account is empowered with full privileges while the admin account is with partial ones.

The default user name and password for both the root and admin account are as follows:

Mode AP Mode CPE Mode

Management

Account Root

Account Admin

Account

User Name root root a dmin

Password a dmin a dmin a dmin

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 7 -

Step 1: IP Segment Setup for Administrator PC

Set a static IP address on the same subnet mask as OWL400/410 in TCP/IP of the administrator PC, such as

the following example. Do not duplicate the IP address used here with the IP address of OWL400/410 or any

other devices within the same network.

>> Example of IP Segment:

The valid range of IP address is 1 ~ 254. However, 1must be avoided as it is already used by OWL400/410.

Below depicts an example of using 100 (the underlined value can be changed as desired).

IPAddress: 192.168.1.100

Subnet Mask: 255.255.255.0

Step 2: Launch Web Browser

Launch a web browser to access the web management interface of AP mode by entering the default IP

address, http://192.168.1.1/, in the URL field, and then press Enter.

Using an incorrect default IP address will result in no Login page

shown in the web browser. Please make sure a correct IP

address is used for the desired mode.

Step 3: System Login

The system manager Login Page will then appear.

Enter “root” in the User name field and “admin” in the Password field, and then click Login to log in.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

- 8 -

Step 4: Login Success

After a successful login to OWL400/410, a System Overview page of web management interface will appear,

To logout, simply click on the Logout button at the upper right hand corner of the interface.

Note:

By default, AP mode is enabled. Therefore, the

administrator must access the system via theAP

mode login page for the first time. The administrator is

then able to switch between modes afterwards.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

O W L 4 0 0 / 4 1 0 L o n g R a n g e O u t d o o r A P / B r i d g e / C P E ENGLISH

C o mmo n Settin g s

Step 1: Mode Confirmation

Ensure the Operating Mode is currently in AP mode.

Click on the Status button and then select the System Overview tab. The Operating Mode is at the

System section on the System Overview page.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali 4IPNET Punto di accesso wireless

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente