Aaeon EPIC-8526 Manuale utente

EPIC Board EPIC-8526

EPIC-8526

Intel®Embedded Pentium®M

and Celeron®M Processors

DDR 266 SODIMM up to 1GB

Up to 24-bit Dual-Channel

LVDS TFT LCD

6 USB 2.0 / 5 COMs

EPIC-8526 Manual Rev.A 1st Ed.

June 2008

EPIC Board EPIC-8526

This document is copyrighted, 2008. All rights are reserved. The

original manufacturer reserves the right to make improvements

to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated,

or transmitted in any form or by any means without the prior

written permission of the original manufacturer. Information

provided in this manual is intended to be accurate and reliable.

However, the original manufacturer assumes no responsibility

for its use, or for any infringements upon the rights of third

parties that may result from its use.

The material in this document is for product information only

and is subject to change without notice. While reasonable

efforts have been made in the preparation of this document to

assure its accuracy, AAEON assumes no liabilities resulting

from errors or omissions in this document, or from the use of the

information contained herein.

AAEON reserves the right to make changes in the product

design without notice to its users.

EPIC Board EPIC-8526

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

 Award is a trademark of Award Software International, Inc.

 CompactFlash™ is a trademark of the Compact Flash

Association.

 Intel®, Pentium®M and Celeron®M are trademarks of Intel®

Corporation.

 Microsoft Windows®is a registered trademark of Microsoft Corp.

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

All other product names or trademarks are properties of their

respective owners.

EPIC Board EPIC-8526

iii

Packing List

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 9657666600 Jumper Cap

• 1 9681945600 Cable Kit for EPIC-8526

• 1 Cooler (for EPIC-8526-A10-02)

• 1 EPIC-8526 CPU Board

• 1 Quick Installation Guide

• 1 CD-ROM for manual (in PDF format) and drivers

If any of these items should be missing or damaged, please

contact your distributor or sales representative immediately.

EPIC Board EPIC-8526

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-3

1.3 Specifications............................................................1-4

Chapter 2 Quick Installation Guide

2.1 Safety Precautions....................................................2-2

2.2 Location of Connectors and Jumpers .......................2-3

2.3 Mechanical Drawing..................................................2-5

2.4 List of Jumpers..........................................................2-7

2.5 List of Connectors .....................................................2-8

2.6 Setting Jumpers ........................................................2-10

2.7 LVDS Operating Voltage Selection (JP1) .................2-11

2.8 Clear CMOS (JP4) ....................................................2-11

2.9 COM2 Ring/ +5V/ +12V Selection (JP14).................2-11

2.10 AT Simulates ATX (JP17).......................................2-11

2.11 LCD Inverter Power Selection (JP19).....................2-11

2.12 COM1/2 Connectors (CN5).....................................2-12

2.13 AT Power Connector (CN6)....................................2-12

2.14 LVDS Connector (CN9)...........................................2-12

2.15 Keyboard/ Mouse Connector (CN10)......................2-13

2.16 IrDA Connector (CN11)...........................................2-13

2.17 COM3 and COM4 Connectors (CN12, CN13)........2-14

EPIC Board EPIC-8526

2.18 Fan Connector (CN14)............................................2-14

2.19 TV-out Connector (CN15) .......................................2-14

2.20 LCD Inverter Power Connector (CN16) ..................2-14

2.21 COM5/ GPS Connector (CN17)..............................2-15

2.22 Audio Connector (Line-in) (CN18)...........................2-15

2.23 Front Panel Connector (CN19) ...............................2-15

2.24 Power Output Connector (CN20)............................2-16

2.25 USB5 & USB6 Connectors (USB1).........................2-16

2.26 Primary EIDE Connector (IDE1) .............................2-16

2.27 LPT Port Connector (LPT1) ....................................2-17

Chapter 3 Award BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 Award BIOS Setup....................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Appendix A Programming The Watchdog Timer

A.1 Programming .........................................................A-2

A.2 IT8712 Watchdog Timer Initial Program................A-6

Appendix B I/O Information

B.1 I/O Address Map....................................................B-2

B.2 1st Memory Address Map.......................................B-3

B.3 IRQ Mapping Chart................................................B-4

B.4 DMA Channel Assignments...................................B-4

EPIC Board EPIC-8526

Appendix C Mating Connector

C.1 List of Mating Connectors and Cables.................. C-2

EPIC Board EPIC-8526

Chapter 1 General Information 1- 1

General

Chapter

Information

EPIC Board EPIC-8526

Chapter 1 General Information 1- 2

1.1 Introduction

AAEON announces a brand new EPIC Express Board-EPIC-8526,

designed to fit in diverse applications that demand for fitting in

different space limitations and high performance.

EPIC-8256 supports socket 478-based Intel Pentium M processor

and onboard Pentium M/ Celeron M processor up to 2.0GHz with

the Front Side Bus 400MHz. The system memory of EPIC-8526 is

200-pin DDR SODIMM and is up to 1GB. Moreover, the chipset of

EPIC-8526 is Intel 852GM + ICH4.

For the network connection, EPIC-8526 deploys Realtek 8100C

10/100Base-TX chip and features two RJ-45 ports to display the

transcendent performance or you may choose optional RTL 8110S

chip features Gigabit LAN for a faster network connection. The

display chipset of EPIC-8526 is Intel 852GM integrated Graphics to

support CRT/LCD, and CRT/DVI simultaneous/ dual view displays.

In addition, EPIC-8526 accommodates a PC/104+ socket for further

expansion and also features one EIDE, one Type II CompactFlash

for storage. The rich I/O makes EPIC-8526 a great solution for

flexible I/O expansion: six USB 2.0 ports, five COM ports, and

optional IrDA header to be integrated to your systems.

EPIC Board EPIC-8526

Chapter 1 General Information 1- 3

1.2 Features

 Intel Embedded Pentium M/ Celeron M Processors Up to

2.0GHz

 SODIMM DDR 266 Max. 1GB

 Up to 24-bit Dual-channel LVDS TFT Panel

Multi-Display: CRT, TV-out, LVDS and DVI

 Dual 10/100Base-TX Ethernet (Optional Gigabit LAN)

 AC97 2.0 Codec 2 CH Audio

 PC/104+ Socket Expansion

Indice

Altri manuali Aaeon Hardware per computer

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente