Aaeon SBC-456 Manuale utente

SBC-456/456E

Half-size 486 CPU Card with

Flat Panel/CRT SVGA Interface

FCC STATEMENT

THISDEVICECOMPLIESWITHPART15FCCRULES.OPERA-

TIONISSUBJECTTOTHEFOLLOWINGTWOCONDITIONS:

(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFER-

ENCE.(2)THISDEVICEMUSTACCEPTANYINTERFERENCE

RECEIVEDINCLUDINGINTERFERENCETHATMAYCAUSE

UNDESIREDOPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS"A" DIGITAL

DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE RPEASON-

ABLE PROTECTION AGAINTST HARMFUL INTERFER-

ENCEWHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENER-

ATES,USES, AND CAN RADIATE RADIO FREQUENCY

ENERGYAND, IFNOTINSTATLLEDANDUSED IN ACCOR-

DANCEWITH THE INSTRUCTION MANUAL, MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICA-

TIONS. OPERATION OF THIS EQUIPMENT IN A RESIDEN-

TIALAREA IS LIKELY TO CAUSE HARMFUL INTERFER-

ENCE IN WHICH CASE THE USER WILL BE REQUIRED

TOCORRECT THE INTERFERENCE AT HIS OWN EX-

PENSE.

This document is copyrighted, 1998, by AAEON Technology Inc.

All rights are reserved. AAEON Technology Inc. reserves the right

to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of AAEON Technology Inc. Information provided in

this manual is intended to be accurate and reliable. However,

AAEON Technology Inc. assumes no responsibility for its use, nor

for any infringements upon the rights of third parties which may

result from its use.

Acknowledgements

ALI is a trademark of Acer Laboratories, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

AMI is a trademark of American Megatrends, Inc.

AutoCAD and AutoShade are trademarks of Autodesk, Inc.

CHIPS Logotype is a registered trademark; Chips 65550 is a

trademark of Chip and Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Lotus, 1-2-3, and Symphony are trademarks of Lotus Development

Corp.

Microsoft Windows®and MS-DOS, are registered trademarks of

Microsoft Corp.

SMC is a trademark of Standard Microsystems Corporation.

TurboDLD Classic is a trademark of Panacea Inc.

UMC is a trademark of United Microelectronics Corporation.

WordPerfect is a trademark of WordPerfect Corporation.

VESA®is a registered trademark of Video Electronics Standards

Association.

All other product names or trademarks are properties of their

respective owners.

Part No. 2047456000 SBC-456 A1.1 4th Edition

August 1999

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1SupportingCD-ROM

• 1 SBC-456/456ECPUcard

• 1 Harddisk drive (IDE) interface cable (40 pin)

• 1 Floppy disk drive interface cable (34 pin)

• 1 6-pin mini-DIN dual outlet adapter for keyboard and PS/2

mouse

• 1 Parallel port adapter (26 pins) and COM 2 adapter (for RS-232/

422/485)kit

• 1RJ-45adapter for 10Base-T Ethernet (SBC-456E only)

• PC/104 Module mounting supports

• 1 bag of screws and miscellaneous parts

If any of these items are missing or damaged, contact your distribu-

tor or sales representative immediately.

Notice

DearCustomer,

Thank you for purchasing the SBC-456/456E board. The user

manual is designed to help you to get the most out of the SBC-

456/456E, please read it thoroughly before you install and use the

board. The product that you have purchased comes with two-year

limited warranty, but AAEON cannot be responsible for misuse of

the product. Therefore, we strongly urge you first read the

manual before using the product.

To receive the lastest version of the user manual, please visit our

Web site at:

http://www.aaeon.com.tw

Contents

Chapter 1: General Information ................................... 1

Introduction ........................................................................... 2

Features.................................................................................. 3

Specifications ......................................................................... 4

Board layout........................................................................... 6

Card dimensions.................................................................... 7

Chapter 2: Installation .................................................. 9

Jumpers and connectors .................................................... 10

Locating jumpers and connectors .................................... 11

Setting jumpers ................................................................... 12

Safety precautions ............................................................... 13

Installing DRAM (SIMMs) ............................................... 14

InstallingSIMMs .....................................................................14

Removing SIMMs ...................................................................14

IDE hard drive connections (CN1) .................................. 15

Connecting the hard drive .......................................................15

IDE LED.................................................................................16

Display connector (CN9, CN2) ......................................... 17

Floppy drive connector (CN3) .......................................... 19

Connecting the floppy drive.....................................................19

Parallel (printer) connector (CN4) ................................... 20

Installing the retaining bracket.................................................20

Power connector (CN5)...................................................... 21

Serial port connectors (CN8, CN6) .................................. 22

RS-232 connector....................................................................22

RS-232/422/485 connector (CN6)...........................................23

Ethernet connectors (CN7) ............................................... 24

Keyboard and PS/2 mouse connectors (CN10, CN11).. 24

Ethernet link/active signal LED (J2)(J3)........................ 25

Buzzer or external speaker (J4)....................................... 26

Reserved IR connector (J5) ................................................. 26

ClearCMOS (J6) .................................................................. 27

Power LED and keylock (J7)............................................... 27

Fan power connector (J8) .................................................... 28

LCD SHF/ASHF clock selections (JP1) .............................. 28

LCD driving voltage setting (JP2)....................................... 29

DOCaddress setting(JP3)................................................... 29

Hardwarereset (JP4) ............................................................ 30

RS-232/422/485select (JP5) ................................................. 30

DiskOnChip socket (U13) .................................................... 31

Chapter 3: AMIBIOS Setup ......................................... 33

GeneralInformation ............................................................ 34

StartingAMIBIOSsetup......................................................... 34

AMIBIOS main menu............................................................. 34

Using a mouse with AMIBIOS setup...................................... 35

Using the keyboard with AMIBIOS setup .............................. 35

StandardCMOSsetup ......................................................... 36

AdvancedCMOS setup........................................................ 38

Advancedchipset setup........................................................ 44

Powermanagementsetup .................................................... 47

PowerManagement/APM .................................................... 48

PCI/Plug and play setup ...................................................... 49

Peripheralsetup .................................................................... 53

Changesupervisorpassword ............................................... 56

Auto configuration with optimal settings........................... 57

Auto configuration with fail safe setting ............................ 58

Save settings and exit ........................................................... 59

ExitingAMIBIOS ................................................................. 60

Chpater 4: Flat Panel/CRT Controller Display Drivers

and Utilities ......................................... 61

Softwaredrivers .................................................................... 62

Hardwareconfiguration .......................................................... 62

Necessaryprerequisites........................................................... 63

Before you begin .................................................................... 63

Windows95 ........................................................................... 64

Windows 3.1 .......................................................................... 72

Driver installation .................................................................... 72

OS/2 ....................................................................................... 73

WindowsNT3.51................................................................... 75

Driver installation .................................................................... 75

WindowsÔNT4.0 ................................................................. 76

Driver installation .................................................................... 76

Chapter 5: Ethernet Software Configuration ........ 77

Ethernetsoftwareconfiguration.......................................... 78

Appendix A: Watchdog Timer Demo Pro

gram ....................................... 79

Programmingthewatchdogtimer....................................... 80

How to program the WATCHDOG TIMER ........................... 80

Demoprogram........................................................................ 81

Appendix B: Installing PC/104 Modules ...... 83

Installing PC/104 modules ................................................... 84

Chapter 1 General Information 1

CHAPTER

General

Information

This chapter provides background

informationfor theSBC-456/456E.

Sections include:

• Card specifications

• Board layout

2SBC-456/456E User Manual

Introduction

TheSBC-456/456E is an all-in-one single board 486 computerwithan

onboardflatpanel/CRTSVGAcontrollerand PCIEthernet

interface (SBC-456E). It packs all the functions of an industrial

computer and its display capabilities onto a single, half-size card.

This means the SBC-456/456E is your absolute best solution for

embedded applications.

The onboard PCI-bus, flat panel/CRT SVGA controller uses the

CHIPS 65550 chipset with up to 2 MB of video memory (onboard

1MB). This chipset, used with the local PCI-bus, enables 32-bit

graphic throughput at up to 33 MHz. Excellent for display-intensive

applications, it supports various LCD types including TFT, STN, B/

W, and EL.

The onboard Ethernet Realtek RTL 8029AS PCI bus Ethernet

controller supports remote boot ROM functions (SBC-456E only).

TheSBC-456/456Esupports the M-Systems DiskOnChip 2000

(optional) which is a new generation of high performance single-

chip Flash Disk. It provides a Flash Disk (as a BIOS expansion)

which doesn't require any bus, slots, or connectors. It is also the

optimal solution for Single Board Computers because of its small

size, easy integration, plug-and-play functionality, and its low power

consumption. The DiskOnChip is available in capacities from 2MB

to 144MB and fits in a standard 32-pin DIP socket.

Another feature of the SBC-456/456E is the inclusion of a high

speed, local bus IDE controller. This controller supports (through

ATA PIO) mode 3 and mode 4 hard disks, enabling data transfer

rates in excess of 11 MB/second. Up to four IDE devices can be

connected, including large hard disks, CD-ROM drives, tape backup

drives, or other IDE devices. The built-in, enhanced IDE controller

provides a 4-layer, 32-bit, posted write buffer and a 4-layer, 32-bit

read-prefetch buffer to boost IDE performance.

Altri manuali per SBC-456

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Aaeon Hardware per computer

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente