Aaeon ACP-1104 Manuale utente

Multi-Touch Panel PC ACP-1104

ACP-1104

10.1” Multi-Touch Panel PC

Intel®Celeron® Processors

RS-232/422/485

USB 3.0, MiniCard, HDMI

ACP-1104 Manual 1st Ed

May 26, 2015

Multi-Touch Panel PC ACP-1104

This document is copyrighted, 2015. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, nor for

any infringements upon the rights of third parties, which may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON, assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Multi-Touch Panel PC ACP-1104

Acknowledgments

Intel®, AtomTM are registered trademarks of Intel®Corporation.

Microsoft®Windows is a registered trademark of Microsoft®

Corporation.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

C&T is a trademark of Chips and Technologies, Inc.

UMC is a trademark of United Microelectronics Corporation.

ITE is a trademark of Integrated Technology Express, Inc.

All other product names or trademarks are properties of their

respective owners.

Multi-Touch Panel PC ACP-1104

Packing List

Before you begin installing your Panel PC, please make sure that the

following items have been shipped:

ACP-1104 Multi-Touch Panel PC

RJ-45 COM Port Cable x 2

Power Adapter x 1

Product DVD with User’s Manual (in pdf), drivers and

utilities

VESA Mount

Panel Mount

If any of these items are missing or damaged, you should contact your

distributor or sales representative immediately.

iii

Multi-Touch Panel PC ACP-1104

Safety & Warranty

Please read the following safety instructions carefully. It is advised

that you keep this manual for future references

1. Disconnect this device from any AC supply before cleaning.

2. While cleaning, use a damp cloth instead of liquid or spray

detergents.

3. For any pluggable equipment, the power outlet must be installed

near the device and easily accessible.

4. Keep this device away from humidity.

5. Place this device on a solid surface during installation. Dropping

it or letting it fall could cause damage.

6. The openings on the device’s enclosure are for dissipating heat.

DO NOT COVER THE OPENINGS.

7. Watch out for high temperatures that may occur during system

operation.

8. Make sure the voltage of the power source is correct before

connecting the device to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the device should be noted.

11. If the device is not to be used for a long time, disconnect it from

the power supply to avoid damage by transient over-voltage.

12. Never pour any liquid into the openings. This could cause fire or

electric shock.

13. As most electronic components are sensitive to static electrical

Multi-Touch Panel PC ACP-1104

charge, be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist strap

and contain all electronic components in any static-shielded

devices.

14. If any of the following situations arises, please the contact

our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner

as described in this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the

device

15. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -10° C (14°F) OR ABOVE 60° C (140° F) TO

PREVENT DAMAGE.

16. External equipment intended for connection to signal input/output

or other connectors, shall comply with relevant UL / IEC standard

(e.g. UL 1950 for IT equipment and UL 60601-1 / IEC 60601

series for systems – shall comply with the standard IEC

60601-1-1, Safety requirements for medical electrical systems.

Equipment not complying with UL 60601-1 shall be kept outside

the patient environment, as defined in the standard.

17. When the temperature of CPU is higher than 35°C, the frequency

of CPU will be adjusted automatically. For example, if the

Multi-Touch Panel PC ACP-1104

temperature of Intel Core i7 is 40°C, the frequency of the CPU

will be between 1.8~1.3 GHz.

FCC

This device complies with Part 15 FCC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired

operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer’s instructions and your local government’s recycling or

disposal directives.

Multi-Touch Panel PC ACP-1104

Classification

1. Degree of production against electric shock: not classified

2. Degree of protection against the ingress of water: IPX1

3. Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

4. Mode of operation: Continuous

5. Type of protection against electric shock: Class I equipment

vii

Multi-Touch Panel PC ACP-1104

Safety Symbol Description

The following safety symbols are further explanations for your

reference.

Attention, consult ACCOMPANYING

DOCUMENTS.

Ground wire

Protective Ground wire.

viii

Multi-Touch Panel PC ACP-1104

China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Panel PC/ Workstation

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

液晶模块

○

光驱

○

触控模块

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006

标准规定的限量要求以下。

：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006

标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Indice

Altri manuali Aaeon Pannello touch

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente