Aardee ARO-60RCT Manuale utente
ARO-60RCT Electric Oven with Hotplate
User’s Guide
Thank you for your purchase.
As a new aardee user, please take
time to read the manual to make the
best use of your aardee appliance.
Thank you
Team aardee
Table of contents
Before using the appliance 1
Safety measures 1
Before plugging in 2
Diagram 3
How to operate the oven 4
How to use rotisserie 5
How to use the hotplate 6
How to bake 6
How to broil 6
How to toast 6
Troubleshooting 7
Cleaning and maintenance 8
Recipe 8
Service center 10
Warranty 10
Before using
Read the instructions properly before using the unit.
1. Remove all packaging including protective
foam/cellophane and labels.
2. Dispose the packaging properly and keep it out of reach of
children.
3. Ensure that all parts are complete as shown/mentioned in
this manual.
Safety Measures
Use the iron only for its intended domestic use.
The oven MUST always be turned off before plugging in or
unplugging from power outlet for cleaning, servicing or
moving purposes.
To protect against electric shock, do not immerse cord and
any parts of the oven into water or any other liquid.
Do not let the cord hang over the edge of the table.
Do not let the power cord touch any hot surface.
Never use unauthorized accessories/attachments with the
oven as this may cause hazard and or injury.
Never place the oven near any hot gas or electric burner.
Place the oven at least four inches from each side to allow
proper air circulation.
Do not put anything on top and bottom of the oven when
in use.
The oven must be placed far from curtains, draperies and
alike.
Always hold the power plug and never yank the cord.
Be extra careful when moving a drip pan that contains hot
oil or other hot liquid.
Do not use metal foil for covering any part of the oven as it
may overheat.
1
For cleaning, never use metal scouring pad since pieces
can break off the pad and touch electrical parts therefore
creating a risk of electric shock.
Metal utensils and large-sized food items must not be
inserted in the toaster oven as they may create a fire
hazard.
Do not place plastic, paper and alike inside the oven.
Always use pot holders or gloves while putting or removing
items from the hot oven.
Avoid scratching the door surface.
Before plugging in
Make sure your electricity supply is the same with the
required voltage of the appliance.
Do not use the product if power cord is damaged. It must
be replaced by the manufacturer or the authorized
reseller/distributor.
Ensure the oven is unplugged and TIME CONTROL is set to
OFF.
Wash all the accessories in hot, soapy water using a soft
cloth.
Dry the accessories thoroughly and put them into their
proper places inside the oven.
2
Diagram
Parts of the oven
A:Housing
B:Front Plate
C:Door Handle
D:Glass Door
E: Lower Door Frame
F: Temperature Control Knob
G: Oven Switch Knob
H: Hotplate Control Knob
I: Timer Control Knob
J:Oven Lamp
K:Hotplate Lamp
3
L:Foot
M:Rotisserie
N: Wire Rack
O: Bake Tray
P: Bake Tray handle
Q: Rotisserie Handle
R: Big Hotplate (1000W)
S: Small Hotplate (600W)
How to use the oven
Once all the parts are placed properly inside the oven,
we recommend running the appliance at the highest
temperature (250˚C) on the toast function for about 15
minutes in order to eliminate any packing residue that
may remain after shipping and all traces of odour.
For the initial operation, smoke and minimal smell may
occur.
Get to know the functions and accessories
Temperature control – you can set the temperature
between 100˚C and 250˚C for baking, broiling or toasting.
Timer control – to use this, turn to the right (clockwise) to
toast or use as a timer. Once timer is up, a bell ring comes
off.
Function control – there are four options, namely upper
heater with rotisserie, lower heater, upper and lower heater
with rotisserie and OFF.
Neon lamp – choose the desired function and its
corresponding light will turn on.
4
Convection fan – once your desired temperature and
function has been set, the convection fan will start
operating
Stove mode selector – there are four options to select: right
hotplate, left hotplate, left & right hotplate and OFF.
Baking tray – to be used in broiling and roasting. Also can
be used to catch the drippings when rotisserie is in use.
Tray handle – used to pick up the wire rack and baking tray
if they are hot.
How to use the rotisserie
1. Set the temperature control to desired heat.
2. Set the function control to rotisserie .
3. Insert the first spit onto the skewer by pointing inward then
secure it using the provided thumbscrew.
4. Place the skewer across the center of the food you are
going to prepare. Ensure the food is at the center before
inserting the second spit on the skewer. Secure it again
using a thumbscrew.
5. Insert the end-point of the skewer into the drive socket and
the other end on the skewer support.
6. Switch on the power and turn the timer knob to your desired
cooking time.
7. The cycle is completed when the timer knob reaches the
OFF position.
8. To remove the food, lift up the skewer by using the rotisserie
holder.
9. Ensure that both hooks are evenly placed at the edge of
the skewer. Please lift up the one end which rests on the
support first then slowly remove the skewer out from the
drive socket.
10.Place the food on a cutting board and remove it from the
skewer by unscrewing the spit.
5
How to use the hotplate
Left hotplate (1000W)
Operation:
1. Place the food on the left hotplate.
2. Turn the hotplate control knob to .
3. Once the food is cooked, turn the knob to OFF.
Right hotplate (600W)
Operation:
1. Place the food on the left hotplate.
2. Turn the hotplate control knob to .
3. Once the food is cooked, turn the knob to OFF.
How to bake
1. Place the removable rack into the desired position.
2. Put the baking tray inside the oven and close it.
3. Turn the timer knob to the desired cooking time.
4. Select the heater selector knob to BAKE .
5. Once baking is done, turn the timer to OFF position to turn
off the oven.
How to broil
1. Insert the removable bake rack with food and bake tray.
2. Keep the glass door half open.
3. Turn the heat, selector knob to BROIL .
4. Once the broiling is finished, turn the timer to OFF position to
switch it off.
6
How to toast
1. Turn the function control knob to TOAST .
2. Place the food to be toasted onto the wire. The wire rack
should be positioned in the middle of the oven.
3. Turn the timer control knob to OFF.
4. A bell ring sound comes off to signal the end of the cycle.
Note: When sliding trays out of the oven, always support the rack.
Troubleshooting
Please refer to the table below for common queries on this unit as
it may save you time and money. If your concern is not found on
the list or your issue persists then kindly call our service centre.
Problem
Possible causes
Solutions
Oven does not
turn on
The power
cord is not
plugged in
correctly
A fuse has
blown or circuit
breaker has
tripped.
The power
supply does
not meet the
required
voltage of the
oven.
Unplug and Insert again
the power cord properly
and securely to the wall
socket.
Have a technician check
if a fuse has blown,
change it if necessary.
Reset the circuit breaker if
needed.
Make sure the home
power supply meets the
required voltage of the
oven.
Oven does not
reach the set
temperature
The glass door
is not closed
properly.
Ensure the glass door is
closed.
Smoke is
coming out of
the oven
It’s the initial
operation of
the oven.
A flammable
material such
as paper is
inside the
oven.
For the initial operation,
smoke is likely to come out
as it burns the protective
substance applied on it
during production.
Remove any flammable
materials.
7
Indice
Altri manuali Aardee Forno
