AAxeon LNP-600N Manuale utente

6-port Industrial Managed PoE Ethernet Switch
User’s Manual
Version 1.2

Aaxeon Technologies, LLC
1
Table of Content
Getting to Know Your Switch........................................................................3
1.1 About the LNP-600N/LNP-602N Managed Industrial Switch................................... 3
1.2 Software Features.................................................................................................... 3
1.3 Hardware Features................................................................................................... 3
Hardware Installation.....................................................................................4
2.1 Installing Switch on DIN-Rail.................................................................................... 4
2.1.1 Mount LNP-600N/LNP-602N Series on DIN-Rail ................................................ 4
2.2 Wall Mounting Installation ........................................................................................ 5
2.2.1 Mount LNP-600N/LNP-602N Series on wall........................................................ 5
Hardware Overview........................................................................................7
3.1 Front Panel............................................................................................................... 7
3.2 Front Panel LEDs................................................................................................... 10
3.3 Bottom Panel.......................................................................................................... 10
3.4 Rear Panel ..............................................................................................................11
Cables...........................................................................................................12
4.1 Ethernet Cables...................................................................................................... 12
4.1.1 100BASE-TX/10BASE-T Pin Assignments........................................................ 12
4.2 Fibers ..................................................................................................................... 13
WEB Management........................................................................................14
5.1 Configuration by Web Browser .............................................................................. 14
5.1.1 About Web-based Management........................................................................ 14
5.1.2 Basic Setting...................................................................................................... 16
5.1.2.1 Switch setting ............................................................................................ 16
5.1.2.2 Admin Password ....................................................................................... 16
5.1.2.3 IP configuration ......................................................................................... 17
5.1.2.4 SNTP Configuration .................................................................................. 18
5.1.2.5 Backup & Restore ..................................................................................... 21
5.1.2.6 Upgrade Firmware..................................................................................... 21
5.1.2.7 Factory Default.......................................................................................... 22
5.1.2.8 System Reboot.......................................................................................... 22
5.1.3 Port Configuration.............................................................................................. 23

Aaxeon Technologies, LLC
2
5.1.3.1 Port Control............................................................................................... 23
5.1.3.2 Port Status................................................................................................. 23
5.1.4 Redundancy....................................................................................................... 24
5.1.4.1 Fast Recovery Mode................................................................................. 24
5.1.4.2 Redundant Ring ........................................................................................ 24
5.1.4.3 RSTP......................................................................................................... 26
5.1.5 SNMP Configuration .......................................................................................... 28
5.1.5.1 SNMP – Agent Setting.................................................................................... 28
5.1.5.2 SNMP –Trap Setting ................................................................................. 29
5.1.6 VLAN.................................................................................................................. 30
5.1.6.1 VLAN Configuration – Port Based............................................................. 30
5.1.7 Warning.............................................................................................................. 31
5.1.7.1 Fault Alarm ................................................................................................ 31
5.1.8 Front Panel ........................................................................................................ 36
5.1.9 Save Configuration ............................................................................................ 36
5.1.10 LLDP.............................................................................................................. 37
5.1.11 Power over Ethernet (P.O.E.)........................................................................ 37
5.1.12 Auto-Ping Check............................................................................................ 39
5.1.13 Schedule........................................................................................................ 40
Technical Specifications .............................................................................41

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
3
Getting to Know Your Switch
1.1 About the LNP-600N/LNP-602N Managed Industrial
Switch
The LNP-600N/LNP-602N switch is a cost-effective and powerful industrial switch with many
features. These switches can work under wide temperature and dusty environment and
humid condition.The LNP-600N/LNP-602N support Power over Ethernet, a system to
transmit electrical power with data to remote devices over standard twisted-pair cable. The
LNP-600N/LNP-602N switch has 4 X 10/100TX PSE (Power Sourcing Equipment) ports
which are fully compliant with IEEE 802.3af standard.
1.2 Software Features
World’s fastest Redundant Ethernet Ring (Recovery time < 10ms over 250 units
connection)
Supports Ring Coupling, Dual Homing and RSTP over Redundant Ring
Support fast recovery mode
Easy web configuration
1.3 Hardware Features
Wide Operating Temperature: -40 to 75oC
Storage Temperature: -40 to 85 oC
Operating Humidity: 5% to 95%, non-condensing
4 10/100Base-T(X) Ethernet port with PSE provides up to 25 watts
10/100Base-T(X) Ethernet port
100Base-FX Fiber port

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
4
Hardware Installation
2.1 Installing Switch on DIN-Rail
Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the
DIN-Rail. It is easy to install the switch on the DIN-Rail:
2.1.1 Mount LNP-600N/LNP-602N Series on DIN-Rail
Step 1: Slant the switch and mount the metal spring to DIN-Rail.
Step 2: Push the switch toward the DIN-Rail until you heard a “click” sound.
Metal Spring

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
5
2.2 Wall Mounting Installation
Each switch has another installation method for users to fix the switch. A wall mount panel
can be found in the package. The following steps show how to mount the switch on the
wall:
2.2.1 Mount LNP-600N/LNP-602N Series on wall
Step 1: Remove DIN-Rail kit.
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.
Just like the picture shows below:

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
6
The screws specification shows in the following two pictures. In order to prevent switches
from any damage, the screws should not be larger than the size that is used in the switch.
Pozidrive
Step 3: Mount the combined switch on the wall.

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
7
Hardware Overview
3.1 Front Panel
The following table describes the labels that stick on the LNP-600N/LNP-602N.
Port Description
10/100 RJ-45 fast
Ethernet ports
10/100Base-T(X) RJ-45 fast Ethernet ports support
auto-negotiation.
Default Setting :
Speed: auto
Duplex: auto
Flow control : disable
Fiber port 100BaseFX
P.O.E. Port Port 1 ~ 4 contain PSE function compliant with IEEE802.3af
P.O.E. specifications.
ResetPush reset button 2 to 3 seconds to reset the switch.
Push reset button 5 second to reset the switch into Factory
Default.

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
8
LNP-600N
1. LED for PWR1. When the PWR1 links, the green led will be light on.
2. LED for PWR2. When the PWR2 links, the green led will be light on.
3. LED for PWR3. When the PWR3 links, the green led will be light on.
4. LED for R.M. (Ring master). When the LED light on, it means that the switch is the ring
master of Redundant Ring.
5. LED for Ring. When the led light on, it means the Redundant Ring is activated.
6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.
7. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
8. 10/100Base-T(X) Ethernet ports.
9. LED for Ethernet ports status.
10. 10/100Base-T(X) Ethernet ports.
11. LED for Ethernet ports status.
12. LED for P.O.E. power supplied.

LNP600N / LNP-602N User’s Manual
Aaxeon Technologies, LLC
9
LNP-602N
1. LED for PWR1. When the PWR1 links, the green led will be light on.
2. LED for PWR2. When the PWR2 links, the green led will be light on.
3. LED for PWR3. When the PWR3 links, the green led will be light on.
4. LED for R.M. (Ring master). When the LED light on, it means that the switch is the ring
master of Redundant Ring.
5. LED for Ring. When the led light on, it means the Redundant Ring is activated.
6. LED for Fault Relay. When the fault occurs, the amber LED will be light on.
7. Reset button. Push the button 3 seconds for reset; 5 seconds for factory default.
8. 10/100Base-T(X) Ethernet ports.
9. LED for Ethernet ports status.
10. 100BaseFX fiber port.
11. LNK/ACT LED for fiber port.
12. LED for P.O.E. power supplied.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali AAxeon Interruttore


















