ab PULSe 4K MINI Manuale utente
4K UHD Satellite Receiver
User manual
2
Contents
Important
Safety instruction1.1 3
4
4
4
5
6
8
9
14
15
16
1.2
1.3
1.4
2.1
3.1
3.2
4.1
5.1
6.1
7.1
Waste disposal
Environmental protection
Battery note
Front panel/ Rear panel
Remote control(RCU) / Buttons
Information about RCU and batteries
First installation / Installation Wizard
OSD display
Product description
Declaration of conformity
Please read this manual carefully and keep it.
We expressly reserve the right to make technical changes or changes in operation - which
serve to improve the device or which increase the safety standard - even without a separate
announcement.
An E2 Linux Receiver is very extensive and is developed every day. Therefore,it is very
difficult to create a manual according to the current state. The manual was created based
on the software version openATV 6.4.
A function can change, evolve or even disappear after a certain amount of time.
The actual appearance of the product may differ from the photograph of the instructions
and on the packaging.
All information is provided without warranty. Printing errors,mistakes and changes reserved.
This document may only be reprinted or copied in whole or in part with the express,
written approval of the manufacturer. Any type of reproduction,distribution,translation
or transmission in any form,electronically or mechanically,including photocopying,
recording or storage on data media without the approval of the manufacturer,violates the
applicable copyright laws and will be prosecuted.The copyright of these operating
instructions remains with the manufacturer.
3
1.1Safety instruction
This device complies with international safety standards.
Before commissioning, please read the safety instructions carefully and
Keep the operating instructions within easy reach.
Observe the warnings on the device and in the operating instructions.
Never allow children to use electrical appliances unattended.
Disconnect from the mains during prolonged absence: when the unit is on for a longer
period of time Unattended (for example, holidays), you should completely disconnect it
from the mains.
Lightning protection: To protect the receiver, switch it off during thunderstorms and pull
the receiver Power plug and the antenna cable. This protects your receiver from
overvoltage damage.
Connecting the peripheral devices: Disconnect the device from the power supply before
disconnecting the device Connect or disconnect cables to antennas,TV sets and other
devices.
Environmental conditions: Protect the device from moisture and heat and set it
no direct sunlight.Open fire sources,such as burning ones
Candles, must notbe placed on the device. Avoid putting the receiver in areas
with insufficient ventilation. Keep a clearance of at least 10cm
over and at least 5 cm from the side of the device, so that the heat generated unhindered
can be dissipated. Do not place objects filled with liquids, eg.Vases,
on the device. Avoid the penetration of foreign bodies and liquids into the device.
Do not expose the device to dripping or splashing water.
Mains connection:100 240V Ac, 50 / 60Hz. First connect the receiver with
the power grid after you have completely wired it. Avoid overloading the
Socket, the power supply lines or a power supply. This could be to fire or one
lead electric shock.
Installation: The rubber feet can cause color changes in connection with furniture surfaces.
If necessary, place the device on a suitable surface.
Faults: In case of damage to the mainscable or the device immediately unplug the mains
plug from the mains socket. Never try to open or repair the device yourself.
Batteries: Children may take batteries in their mouths and swallow them. Leaking
batteries can damage the remote control. If the receiver is not used for along time, remove
the batteries from the remote control.
Use only genuine parts and accessories: Use only original parts or parts recommended by
your dealer to prevent damage to your device or injury. Failure to observe this warning will
void the device warranty. Every intervention and every repair must only be carried out by a
qualified specialist!
4
1.2 Waste Disposal
1.3 Environmental protection
1.4 Battery note
Any other use is considered improper and can lead to property damage, possibly even
personal injury. The manufacturer assumes no responsibility for damage or injury resulting
from failure to observe the safety instructions or improper handling the device. Settings
on the receiver may only be made by persons with appropriate knowledge of consumer
electronics. This also means that every person who assembles, connects, operates, cleans
or disposes of this receiver has read the complete operating instructions of the device in
order to ensure the intended use. Keep the operating instructions for this purpose.
Electronic devices are not household waste, but must be disposed of
properly in accordance with Directive 2002 / 96 / EC of the EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste
electrical and electronic equipment(WEEE). Please dispose of this device
at the end of its use for disposal at the designated public collection points.
Packaging and packaging aids that are nolonger needed
are recyclable and should always be recycled.
Used batteries are not to be disposed in household waste.
These must be handed in at a collection point. Information
about the collection points can be obtained from your local
municipality.
Legislators have clearly regulated the disposal of batteries. Batteries must
be returned free of charge by the dealer or by municipal collection points in
normal household quantities. Batteries may no longer be disposed of with
household waste. Take advantage of the free return options! Protect your
environment. Return used batteries.
Pb = battery contains lead
Cd = battery contains cadmium
Hg = battery contains mercury
Pb Cd Hg
Intended use: The digital receiver is used to receive digital TV or Radio programs in
the private sector. It is exclusively intended for the stated purpose and may only be
used for it. This includes the observance of all information in this manual, especially
the safety instructions.
5
2.1 Front panel/ Rear panel
A Power Button (standby and operating mode)
1 1x CA card reader
2 1x CI module interface
3LNB input Tuner
4S/PDIF (Digital audio output)
5Micro SD card reader
6Connection for Infrared-Sensor
7 HDMI connection (to TV)
8 LAN 10/100 Mbit/s Network connection
9USB 2.0 connection
10 USB 3.0 connection
11 External Power supply (DC 12V / 2A)
12 Mechanical power switch
321
A
4 5 6 7 8 109 11 12
3.1 Remote control (RCU) / Buttons
On / Off button (operation / standby)
Turn sound on / off
Videotext on / off
Select audio track
Help button (quick selection)
Show movie folder
Select subtitle
Switch between TV / radio programs
Fast rewind
Play function
Timeshift function
Fast playback
Record button
Pause function
Stop function
Information about the
current program
Show Favorites
Volume control
louder / quieter
Channel switching
Switch programs up / down
Menu - Menu control
Exit - exit Menu
Show movie folder
Show EPG
Electronic program guide
6
PVR
3.1 Remote control (RCU) / Buttons
- Navigate in Menu
(up / down / right / left)
- ▲ / ▼ Show program list
- ◀ / ▶ Show graphic info bar EPG
Confirmation button in the menu
Color buttons
Each key is assigned a specific
function, which can be assigned
differently depending on the menu.
A distinction is often made between
long and short key presses
Numeric keys for program
selection and alphanumeric input
during programming (1-0 / A-Z)
Show History Zap
Control of the text cursor (L/R)
7
3.2 Information about RCU and batteries
Observe the following instructions to avoid damage or battery leakage:
• DO NOT use new and old batteries together!
• DO NOT use two different batteries!
• Remove the batteries from the remote control if you will not be using them for a long time!
Always aim the remote at the receiver -not at your TV. The distance should not be greater
than 7m. The angle should not exceed 30 °.
If you want to place the receiver behind your
TV set or in a TV cabinet, use the IR sensor.
(Illustration can deviate).
Open the battery cover in the
direction of the arrow and remove
it upwards
Insert the two batteries correctly
into the battery compartment as
shown.
Pay attention to the correct
polarity when inserting the
batteries!
1.)
2.)
3.)
30
30
8
max. 7m
9
4.1 First installation / Installation wizard
The FIRST INSTALLATION WIZZARD starts with the first installation after your purchase.
When you use this receiver for the first
time, the automatic installation wizard
starts and guides you through initial
programming. Press the RED button
to change your language.
First select your input (HDMI or JACK).
Use ▲ / ▼ buttons on your remote
control to select and confirm your
selection with the OK button.
Choose your next menu, to the receiver
some screen solutions from your tv
device from read soil. Choose you yes
/ no with the keys ▲ / ▼ on your
remote and confirm your selection
with the OK button.
Your possible resolutions are now
displayed. Select your desired
resolution (video Mode) with the
▲ / ▼ buttons on your remote
control and confirm your selection
with the OK button.
e.g.: 720p, 1080p, 1080i, 576p,
576i, 480p, 2160p
In next menu, select the refresh rate
with the ▲ / ▼ buttons on the
remote control and confirm your
selection with the OK button.
e.g50 Hz, multi, 60 Hz, auto
Indice
Lingue:
Altri manuali ab Ricevitore
