ABB RELION REF615R Manuale utente
—
RELION® PROTECTION AND CONTROL
REF615R
DNP3 Communication Protocol Manual
Document ID: 1MRS240048-IB
Issued: 2019-07-02
Revision: C
Product version: 4.1
© Copyright 2019 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third party, nor
used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and may
be used, copied, or disclosed only in accordance with the terms of such license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product
names mentioned in this document may be trademarks or registered trademarks of their
respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
www.abb.com/mediumvoltage
www.abb.com/substationautomation
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or
product description and are not to be deemed as a statement of guaranteed properties. All
persons responsible for applying the equipment addressed in this manual must satisfy
themselves that each intended application is suitable and acceptable, including that any
applicable safety or other operational requirements are complied with. In particular, any
risks in applications where a system failure and/or product failure would create a risk for
harm to property or persons (including but not limited to personal injuries or death) shall
be the sole responsibility of the person or entity applying the equipment, and those so
responsible are hereby requested to ensure that all measures are taken to exclude or
mitigate such risks.
This product has been designed to be connected and communicate data and information
via a network interface which should be connected to a secure network. It is the sole
responsibility of the person or entity responsible for network administration to ensure a
secure connection to the network and to take the necessary measures (such as, but not
limited to, installation of firewalls, application of authentication measures, encryption of
data, installation of anti virus programs, etc.) to protect the product and the network, its
system and interface included, against any kind of security breaches, unauthorized access,
interference, intrusion, leakage and/or theft of data or information. ABB is not liable for
any such damages and/or losses.
This document has been carefully checked by ABB but deviations cannot be completely
ruled out. In case any errors are detected, the reader is kindly requested to notify the
manufacturer. Other than under explicit contractual commitments, in no event shall ABB
be responsible or liable for any loss or damage resulting from the use of this manual or the
application of the equipment.
Conformity
This product complies with the directive of the Council of the European Communities on
the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for use
within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is
the result of tests conducted by ABB in accordance with the product standards EN 50263
and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and
EN 60255-27 for the low voltage directive. The product is designed in accordance with the
international standards of the IEC 60255 series and ANSI C37.90. The DNP3 protocol
implementation in this product conforms to "DNP3 Intelligent Electronic Device (IED)
Certification Procedure Subset Level 2", available at www.dnp.org. This product
complies with the UL 508 certification.
Table of contents
Section 1 Introduction............................................................................3
This manual.............................................................................................. 3
Intended audience.................................................................................... 3
Product documentation.............................................................................4
Product documentation set..................................................................4
Document revision history................................................................... 4
Related documentation........................................................................4
Symbols and conventions.........................................................................5
Symbols...............................................................................................5
Document conventions........................................................................ 5
Section 2 DNP3 overview......................................................................7
DNP3 standard......................................................................................... 7
Physical layer.......................................................................................7
Data link layer......................................................................................7
Transport pseudo-layer....................................................................... 8
Application layer parameters............................................................... 9
Communication modes........................................................................9
Section 3 Vendor-specific implementation.......................................... 11
DNP3 link modes.................................................................................... 11
DNP3 data objects.............................................................................11
DNP3 serial link mode....................................................................... 11
DNP3 TCP/IP mode...........................................................................12
DNP3 point settings................................................................................ 12
Binary input points............................................................................. 12
Binary output status points and control relay output blocks.............. 12
CROB index (point) types.............................................................13
Control modes.............................................................................. 14
Binary output status points........................................................... 16
Analog inputs.....................................................................................17
Analog data scaling...................................................................... 18
Fault record time stamp................................................................19
DNP3 points............................................................................................20
Point configuration.............................................................................20
Class assignment.............................................................................. 20
Table of contents
REF615R 1
Communication Protocol Manual
Section 4 DNP3 parameters................................................................23
Parameter descriptions...........................................................................23
Parameter list..........................................................................................26
Section 5 Tolerances...........................................................................29
DNP3 timing considerations................................................................... 29
Section 6 Glossary.............................................................................. 31
Table of contents
2REF615R
Communication Protocol Manual
Section 1 Introduction
1.1 This manual
The communication protocol manual describes a communication protocol supported by
the protection relay. The manual concentrates on vendor-specific implementations.
1.2 Intended audience
This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering the communication setup in a substation
from a protection relay's perspective.
The system engineer or system integrator must have a basic knowledge of communication
in protection and control systems and thorough knowledge of the specific communication
protocol.
1MRS240048-IB C Section 1
Introduction
REF615R 3
Communication Protocol Manual
1.3 Product documentation
1.3.1 Product documentation set
Planning &
purchase
Engineering
Installation
Commissioning
Operation
Maintenance
Decommissioning,
deinstallation & disposal
Quick installation guide
Brochure
Product guide
Operation manual
Installation manual
Engineering manual
Technical manual
Application manual
Communication protocol manual
IEC 61850 engineering guide
Point list manual
GUID-3983CF6E-DF22-4183-B387-D67F3BB9593C V1 EN
Figure 1: The intended use of documents during the product life cycle
1.3.2 Document revision history
Document revision/date Product version History
A/2013-11-22 4.0 First release
B/2016-10-24 4.1 Content updated to correspond to the
product version
C/2019-07-02 4.1 Content updated
Download the latest documents from the ABB Web site
http://www.abb.com/substationautomation.
1.3.3 Related documentation
Name of the document Document ID
DNP3 Point List Manual 1MRS240051-IB
Section 1 1MRS240048-IB C
Introduction
4REF615R
Communication Protocol Manual
Altri manuali per RELION REF615R
4
Indice
Altri manuali ABB Staffetta
ABB
ABB COV-6 Manuale utente
ABB
ABB RELION REF615R Manuale di installazione e funzionamento
ABB
ABB COV-6 Manuale
ABB
ABB TA 450 SU V1000 Manuale utente
ABB
ABB COQ Manuale
ABB
ABB REJ 523 Manuale del prodotto
ABB
ABB Tmax PR222DS/P Istruzioni utente
ABB
ABB SPAJ 142 C Manuale elenco delle parti
ABB
ABB PMA Manuale
ABB
ABB SA-1 Manuale
ABB
ABB REF 610 Manuale del prodotto
ABB
ABB Relion 615 series Manuale utente
ABB
ABB TF65 Manuale utente
ABB
ABB CA-16 Manuale
ABB
ABB KF Manuale
ABB
ABB TA 200 DU V1000 Manuale utente
ABB
ABB Relion 615 series Manuale utente
ABB
ABB REU 610 Manuale del prodotto
ABB
ABB REL-300 Manuale utente
ABB
ABB SSR42 Manuale utente
