Acard ADR-7016L Manuale utente
User Manual
Version 1.1
8/16CH MPEG4 Standalone DVR
ADR- 008L/ ADR- 016L
Statement
The information of the product in this manual is subject to change without prior notice and
does not represent a commitment on the part of vendor, who assumes no liability or
responsibility for any errors that may appear in this manual.
This manual contains materials protected under International Copyright Laws. All rights
reserved. No part of this manual may be reproduced, transmitted or transcribed without the
written consent of the manufacturer.
1
Table of Contents
Section1 Introduction...........................................................................................................................3
1.1 Product Overview......................................................................................................................3
1.2 Product Features........................................................................................................................3
1.3 Product Description...................................................................................................................3
1.4 Product Specifications...............................................................................................................4
1.5 Package .....................................................................................................................................4
Section2 Syste Appearance & Installation .......................................................................................5
2.1 Front Panel.................................................................................................................................5
2.2 Rear Panel..................................................................................................................................7
2.3 HDD Installation........................................................................................................................9
Section3 Menu....................................................................................................................................12
3.1 Menu Display...........................................................................................................................12
3.2 Menu Tree................................................................................................................................13
Section4 Menu Setup .........................................................................................................................15
4.1 TIME........................................................................................................................................16
4.2 RECORD.................................................................................................................................18
4.3 SCHEDULE.............................................................................................................................20
4.4 MOTION.................................................................................................................................21
4.5 ALARM...................................................................................................................................22
4.5.1 ALARM INPUT...............................................................................................................22
4.5.2 BUZZER..........................................................................................................................22
4.6 NETWORK.............................................................................................................................24
4.7 ADVANCED............................................................................................................................25
4.7.1 SYSTEM..........................................................................................................................25
4.7.2 DISPLAY.........................................................................................................................27
4.7.3 CAMERA.........................................................................................................................28
4.7.4 DISK FORMAT...............................................................................................................29
4.7.5 BACKUP.........................................................................................................................30
Section5 Searching for Playback .......................................................................................................31
Section6 Live Display .......................................................................................................................32
Section7 Backup using CF card ........................................................................................................34
Section8 PTZ Control.........................................................................................................................34
Section9 FW Update...........................................................................................................................35
Section10 Re ote Monitoring and Control via Ethernet...................................................................36
10.1 Control DVR re otely over the web.....................................................................................36
10.2 Web troubleshooting..............................................................................................................43
APPENDIX 1. Alar Input/Output Pin Descriptions (16CH)...........................................................44
APPENDIX 2. CF card Co patible List............................................................................................46
2
Section1 Introduction
1.1 Product Overview
esigned for globally increasing surveillance requirements, A R-7008L/ 7016L is a high
performance standalone igital Video Recorder. It takes the advanced MPEG4
compression format to solve the storage problem of huge amount of video, and the
friendly UI design also enables users even unfamiliar with computer operations can easily
control this VR. Furthermore, the system stability and scalability can fulfill all your
surveillance requirements. With Triplex support, Live, Record and Network can be
performed simultaneously. This high-quality VR is absolutely the best choice for your
security surveillance.
1.2 Product Features
●MPEG4 compression format, 1 resolution
●8/16 ch all real-time recording & display
●eSATA interface for external storage expansion
●Multiple recording modes
●Independent channel resolution, quality & frame rate settings
●User-friendly GUI & Multi-language OS
●CF card for firmware update & data archiving
●Mouse control
●Triplex： Live, Record & Network
●Network function
1.3 Product Description
DR-7008L DR-7016L
Compression MPEG4 MPEG4
Channel 8 16
Recording 60fps at 1 120fps at 1
udio In/Out 2/1 2/1
3
1.4 Product Specifications
DR-7008L DR-7016L
Video Video Input：8ch (BNC)
Loop Out：8ch (BNC)
Main Monitor Out：BNC, S-Video
& VGA
Call Monitor Out：BNC*1
Video Compression：MPEG4
isplay Mode：Full, 4, 8, 9
Video Input：16ch (BNC)
Loop Out：16ch (BNC)
Main Monitor Out：BNC, S-Video
& VGA
Call Monitor Out：BNC*1
Video Compression：MPEG4
isplay Mode：Full, 4, 8, 9, 16
udio In/out: 2/1 In/out: 2/1
Recording Resolution Adjustable: 1, Half- 1, CIF
FPS:
60fps at 1(NTSC), 50fpa at 1(PAL)
FPS:
120fps at 1(NTSC), 100fpa at 1(PAL)
Mode：Manual, Schedule, Alarm, Motion, Event & Always
Storage Internal:
Support SATA H *1 (3.5”)
External:
Support eSATA RAI
larm In/out: 8/2 In/out: 16/2
Network Remote Live video Monitoring
Remote control
PTZ Pelco- & Pelco-P protocol
Power C 12V <84W
Dimension 430(W) x 88(H) x 230( ) mm
1.5 Package
●igital Video Recorder*1
●Power Adapter & Power Cord*1
●Screw Bag (for fastening H )
●Support C *1
●User Manual*1
●IR remote Controller*1
●Mouse*1
4
Section2 System ppearance & Installation
2.1 Front Panel
1. Channel Selection buttons
●Number buttons can be used to display given channel on monitor and input
password.
2. Function buttons
●a) PTZ (Pan, Tilt and Zooming)
The camera(s) with panning, tilting and zooming function would be connected with
one and some of video inputs of VR. In order to control PTZ function of the
camera, PTZ button should be pressed first. And then direction buttons for panning
and tilting can be pressed.
●b) Sequential Display button
If this button is pressed, display channels would start to rotate sequentially
according to the cycle time set up in display setting menu.
NOTE: Sequential display icon would be shown on the left-up side of the monitor
after sequential display is turned on.
●c) Display Mode Selection
isplay mode selection button is pressed for switching display modes, single
picture, Quad-split, 8-split, 9-split, 16split would be switched.
●d) Z-, Z+
Used for zoom out/ in under PTZ mode.
●e) Save & Esc
After system setting in menu, this button is used to save the settings and escape to
upper menu.
●f) MENU
This button is pressed to enter menu for system setting.
5
●g) ESC
This button is pressed to return upper menu.
●h) SE RCH
This button can be used to enter playback sub-menu for searching out proper
recorded file for playback.
●i) FUNC
This button is reserved for future use.
●j) LOCK
In order for only authorized person to operate buttons in front panel, this LOCK
button can be utilized. If this button is pressed, all of buttons in front panel are not
operated at the same time LOCK LE ON. To release button locking, password will
be requested after pressing LOCK button. If correct password is input, button
locking will be released.
3. Direction buttons and Enter Button
●a) irection buttons are used to move LEFT, RIGHT, UP and OWN in menu.
●b) ENTER button is used to select parameter in the menu. And in playback, it is
used to select one of listed file for playback after searching recorded files.
4. REC/ STOP, REW(◄◄), FF(►►), PL Y/ P USE (►/ II), and STOP( ■ ) buttons
●a) ●/■ button can be pressed to start recording while emergency recording is
needed and press to stop recording again. This is a toggle button. When VR is
under emergency recording, will appear on right and up side of the monitor.
NOTE: Whatever recording mode for each channel is set as, ●/■ button can
be pressed manually for all channel recording while emergency happens.
b) REW button can be used for high speed backward playback. It support 2 to 16
times playback speed.
●c) FF button to do high speed forward playback. It support 2 to 16 times playback
speed.
●d) PL Y/ P USE is used to freeze playback and also restart playback while pause.
●e) STOP button is used to stop playback
5. LED Indicators
●a) POWER
This green LE will turn “ON” when Power is “ON”.
●b) REC
This red LE will turn “ON” during recording.
●c) L RM
This red LE will turn “ON” when motion detection or alarm have been triggered.
●d) LOCK
This red LE will turn “ON” while LOCK button is working.
●e) HDD
This red LE will blink while recording or playback.
●f) CF
This red LE will will turn “ON” when CF card is inserted. And it will blink while
firmware upgrade or backup.
6. CF slot inserting CF card for data backup and FW upgrade.
7. USB port for mouse connecting only
6
2.2 Rear Panel
1. 8/16CH Video Inputs
●8/16 channel composite video inputs with BNC connectors. NOTE:NTSC and PAL
video sources for 8/16CH video inputs can not be mixed. If they are mixed, VR
can’ not be operated properly.
2. 8/16CH Loop through outputs
●8/16 channel composite video outputs with BNC connectors. If the connection of
loop-through video outputs into another video equipments is requested, 8/16CH
Loop-through outputs can be utilized for it.
3. Video Outputs: 2 BNC, 1 S-Video & 1 VG
●the BNS connector marked “MONITOR”, S-Video and VGA output are used for main
monitoring. The other BNC connector marked “CALL” is used for spot monitoring,
which displays all of connected video channels sequentially and pop up the channel
with event triggered.
4. 2CH udio input (RC ) and 1CH udio Output (RC )
●Audio signal input and output with RCA jack. Connect the audio source to audio
input and audio output to your amplifier because the VR don’t amplify audio
output. A speaker with an amplifier will be needed for audio playback. The audio
input can be from an amplified source or directly from a microphone.
5. Ethernet Port
●Connect a Cat5 cable with an RJ-45 jack to the VR connector. Remote PC viewer
software via network enables you to access live viewing and other available
functions.
7
6. eS T Port for External Storage Expansion
●eSATA device like RAI system is supported for storage expansion, you can
connect it to eSATA port via eSATA cable. Make sure that you have turned on the
eSATA external storage device before VR power on.
7. larm input and relay output
●8/16 alarm inputs and 2 relay output with NO, NC.
8. Fan
●System Fan.
9. Power Input (from dapter)
●Connect the adapter to the VR for C power supply. ( C 12V / 7A).
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Acard Registratore digitale
