Acard ADR-7616 Manuale utente
User Manual
Version 1.3
8CH/16CH H.264 Standalone DVR
ADR-7616
Statement
The information of the product in this manual is subject to change without prior notice and
does not represent a commitment on the part of vendor, who assumes no liability or
responsibility for any errors that may appear in this manual.
This manual contains materials protected under International Copyright Laws. All rights
reserved. No part of this manual may be reproduced, transmitted or transcribed without the
written consent of the manufacturer.
3
Table of Contents
Section1 Introduction...........................................................................................................................5
1.1 Product Overview......................................................................................................................5
1.2 Product Features........................................................................................................................5
1.3 Product Specifications...............................................................................................................5
1.4 Package .....................................................................................................................................6
Section2 System Appearance & Installation .......................................................................................7
2.1 Front Panel.................................................................................................................................7
2.2 Rear Panel................................................................................................................................10
2.3 HDD Installation......................................................................................................................12
Section3 Menu....................................................................................................................................15
3.1 Menu Display...........................................................................................................................15
3.2 Menu Tree................................................................................................................................16
Section4 Menu Setup .........................................................................................................................18
4.1 TIME........................................................................................................................................19
4.2 RECORD.................................................................................................................................21
4.3 SCHEDULE.............................................................................................................................23
4.4 MOTION.................................................................................................................................24
4.5 ALARM...................................................................................................................................25
4.6 NETWORK.............................................................................................................................28
4.7 ADVANCED............................................................................................................................31
Section5 Live Display .......................................................................................................................41
Section6 Backup.................................................................................................................................45
Section7 PTZ Control.........................................................................................................................45
Section8 F/W Update..........................................................................................................................46
Section9 Remote Monitoring and Control via Ethernet.....................................................................47
9.1 Control DVR remotely over the web.......................................................................................47
9.2 Web troubleshooting................................................................................................................56
APPENDIX 1. Alarm Input/Output Pin Descriptions (16CH)...........................................................57
APPENDIX 2. CF card Compatible List............................................................................................59
APPENDIX 3. Play process after backing up DVR files to USB device...........................................60
4
Section1 Introduction
1.1 Product Overview
Designed for globally increasing surveillance requirements, ADR-7616 is a high
performance 16ch standalone Digital Video Recorder. It takes H.264 compression format
to not only improve video quality but also extend recording time over the same hard disk
capacity, and the friendly UI design also enables users even unfamiliar with computer
operations can easily control this DVR. Specially, the advanced remote function of 3G
surveillance and CMS is added so that users can simultaneously operate and control
multiple DVRs that are distributed in different areas through the network interface. This
product also supports Pentaplex, which enables Live, Record, Playback, Backup and
Network to be performed simultaneously. This high-quality DVR is absolutely the best
choice for your security surveillance.
1.2 Product Features
●H.264 compression format, 120fps at D1 for recording
●16ch all real-time recording & display
●eSATA interface (support over 2TB RAID)
●Multiple recording modes
●Independent channel resolution, quality & frame rate settings
●User-friendly GUI & Multi-language OSD
●CF card & USB 2.0 drive for firmware update & file backup
●Support built-in DVD-RW for file backup
●Support mouse control
●Pentaplex: Live, Record, Playback, Backup & Network
●Event notification via E-mail
●Support 3G mobile surveillance
●Support CMS (option)
1.3 Product Specifications
Specifications 7616
Video
Video Input BNC*16
Loop Out BNC*16
Main Monitor Out BNC*2, S-Video*1 & VGA*1
Call Monitor Out BNC*1
Compression
Format H.264
Display Mode Full, 4, 8, 9, 16
Audio Audio Input 16
Audio Output 2
Record Resolution
(Adjustable)
D1:720*480(576), Half-D1:720*240(288),
CIF:320*240(288) (NTSC(PAL))
5
FPS 120(100)fps at D1, 240(200)fps at Half-D1,
480(400)fps at CIF (NTSC(PAL))
Mode Manual, Schedule, Alarm, Motion, Event,
Always
Storage Internal Support SATA HDD*4 (3.5”)
External Support eSATA RAID
Alarm Input/Output 16/4/1
Network
Via Browser Remote Monitoring & Remote control
3G mobile Yes
CMS Option
Other
PTZ Pelco-D, Pelco-P protocol
Power DC 19V <96W
Dimension 430(W) x 88(H) x 340(D) mm
1.4 Package
●Digital Video Recorder*1
●Power Adapter & Power Cord*1
●Screw Bag
1. Black screws are used for screwing the two Mount Brackets to the DVR.
2. The 8 silver screws in one pack are used for screwing DVD-RW
3. The 24 silver screws in one pack are provided for screwing HDDs.
●Support CD*1
●User Manual*1
●IR remote Controller*1
●Batteries (AAA)*2 (used in IR remote controller)
●Mount Bracket*2
6
Section2 System Appearance & Installation
2.1 Front Panel
1. DVD-RW
●This can be used for file backup.
2. Jog and Shuttle
●Jog and shuttle enable user to operate DVR easier in handling such as fast forward,
fast reverse playback and one frame movement in still picture.
3. LED Indicators
a) REC
This red LED will turn “ON” during recording.
b) ALARM
This red LED will turn “ON” when motion detection or alarm have been triggered.
c) NET
This green LED will turn “ON”, while data through network is transmitting.
d) USB
This red LED will turn “ON” during data backup or F/W upgrade through USB drive.
e) LOCK
This red LED will turn “ON” while LOCK button is working.
f) Remote Controller receiver
Remote controller sensor input window.
4. Channel Selection buttons
●Channel selection button from CH1 to CH16 can be used to display given channel
on monitor.
5. Function buttons
a) FUNC
This button is reserved for future use.
b) LOCK
In order for only authorized person to operate buttons in front panel, this LOCK
button can be utilized. If this button is pressed, all of buttons in front panel are not
operated at the same time LOCK LED ON. To release button locking, password will
be requested after pressing LOCK button. If correct password is input, button locking
7
will be released.
c) PTZ (Pan, Tilt and Zooming)
The camera(s) with panning, tilting and zooming function would be connected with
one and some of video inputs of DVR. In order to control PTZ function of the
camera, PTZ button should be pressed first. And then direction buttons for panning
and tilting can be pressed.
d) Sequential Display button
If this button is pressed, display channels would start to rotate sequentially according
to the cycle time set up in display setting menu.
NOTE: Sequential display icon would be shown on the left-up side of the monitor
after sequential display is turned on.
e) Display Mode Selection
Display mode selection button is pressed for switching display modes, single picture,
Quad-split, 8-split, 9-split, 16split would be switched.
f) REC/ STOP button
●/■button can be pressed to start recording while emergency recording is needed
pressed manually for all channel recording while emergency happens.
g) Search button
This can be used to find out proper recorded file for playback or backup. Searching
menu can be displayed by pressing this button.
h) REW(◄◄)
This button can be used for high speed backward playback. It support 2 to 16 times
playback speed.
i) PLAY/ PAUSE (►/ II)
If this button is pressed, playback picture will be frozen. If it is pressed again,
playback will continue to play.
j) STOP button
This button is used to stop playback
k) FF(►►)
Press FF button to do high speed forward playback. It support 2 to 16 times
playback speed.
l) ESC
This button is pressed to return upper menu.
m) Save & Esc
After system setting in menu, this button is used to save the settings and escape to
upper menu.
n) MENU
This button is pressed to enter menu for system setting.
6. Direction buttons and Enter Button
a) Direction buttons are used to move LEFT, RIGHT, UP and DOWN in menu. They also
can be used to input password in OSD keyboard. ENTER button is used to select
and save parameter in the menu. And also in playback it is used to select one of
listed file for playback after searching recorded files .
b) Z-, Z+
Used for zoom out/ in under PTZ mode.
8
7. Power Button (Power On/ Off button)
This Power button can be pressed to turn off DVR power. When this button is
pressed,password is requested. When right password is input, DVR power will be
turned off.
8. USB 2.0 connector
Used for F/W upgrade and data backup.
9. CF slot inserting CF card for F/W upgrade and data backup.
Please refer to Appendix2 for CF compatible list
9
2.2 Rear Panel
1. FAN
System fan
2. 16ch video inputs
16 channel composite video inputs with BNC connectors . NTSC or PAL video sources
can be connected in DVR. But NTSC and PAL video sources for 16ch video inputs can
not be mixed. If they are mixed, DVR can’ not be operated properly.
3. 16ch loop through outputs
16 channel composite video outputs with BNC connectors. If the connection of
loopthrough video outputs into another video equipments is requested, 16ch
loopthrough outputs can be utilized for it.
4. 16ch audio input (RCA)
Connect the audio source to audio input.
5. 2ch Audio Output (RCA)
Audio output to your amplifier.
6. 3ch composite video output and 1 S-Video output
Two video output (MON1 and MON2) and one S-Video are same video output, used to
monitor live, playback pictures. The other is used to monitor SPOT output which
displays all of connected video channels sequentially.
7. Power Input (from Adapter)
Connect the adapter to the DVR for DC power supply. (DC 19V).
8. VGA Output
VGA output can be connected to LCD monitor or CRT monitor.
9. RS232 (It can be utilized for future option.)
10. Alarm input and relay output 16 alarm inputs and 4 relay output with NO, NC
To make secure connections on the Alarm Connector Strip, press and hold the button
10
Indice
Altri manuali Acard Registratore digitale
