Acard ARS-2020 Copy Smart Manuale utente
1
CONTENTS
Chapter1. IntroductionofCopySmart ............................................................. 2
1.1 Overview...................................................................................................... 2
1.2 Feature and specifications ........................................................................... 4
Chapter2.CopySmarthardwareinstallation ................................................... 6
2.1 Verify your package contents ...................................................................... 6
2.2 Preparing for installation.............................................................................. 7
2.3 Installtion of CD-R/RW dirve....................................................................... 8
2.4 Installation of CD-ROM dirve .....................................................................11
2.5 Installation of Copy Smart Cabinet .............................................................14
Chapter3.CopySmartasastand-aloneCDDuper ..........................................17
3.1 Copy Smart control panel ...........................................................................17
3.2 Operation of control panel ..........................................................................18
Chapter4.CopySmartashostedCDdrives .....................................................21
4.1 Connect Copy Smart to host computer.......................................................21
4.2 Cofigruing Copy smart................................................................................21
4.3 Hardware requirement .................................................................................21
4.4 Software requirement ..................................................................................21
4.5 Copy Smart DIP switch adjustment ............................................................22
Chapter5. CopySmartMonitor .......................................................................23
5.1 Copy Smart Monitor utility .........................................................................23
Appendix A. CD drives fully supported by CopySmart ....................................................25
Appendix B. How to avoid failure on duplication ..............................................................26
Appendix C. SCSIDE in brief ....................................................................................................27
Appendix D. SCSIDE utility ......................................................................................................28
Appendix E. Technical supports ...............................................................................................31
Appendix F. How to enable LUN function on ACARD SCSI adapter ..........................32
Appendix G. Benchmark of Copy Smart...............................................................................33
2
ChaCha
ChaCha
Chapter 1.pter 1.
pter 1.pter 1.
pter 1. IntrIntr
IntrIntr
Introduction ofoduction of
oduction ofoduction of
oduction of
ARS-2020 CopARS-2020 Cop
ARS-2020 CopARS-2020 Cop
ARS-2020 Copy Smary Smar
y Smary Smar
y Smartt
tt
t
1.1Overview
PC users who want to backup their CD normally have go through
many steps by turning on their computer, launching the software,
setting up various parameters, and tiding up their computer some-
times up to one hour to get a CD backup. Obviously, a standalone
CD-ROM duplicator will easily resolve the little inconvenience and
drawback mentioned above.
There are some standalone SCSI type CD copier on the market, but
for those PC user who already have an IDE CD-ROM drive and an
IDE CD-R/RW drive, the only solution of having the standalone CD
duplicator is buy a new set of SCSI CD-ROM drive and the CD-R/
RW drive to assemble one.
ACARD Technology wants to help the PC users to protect their IDE
investment(s) by introducing the first standalone IDE CD duplicator
ARS-2020 Copy Smart, which allow the PC users putting their IDE
CD-ROM drive and CD-R/RW drive into a smart standalone
machine.
The ARS-2020 Copy Smart have its own switching power supply
(AC 110V~230V) which are special designed to provide the steady
power which required by the laser burning operation of the CD-R/
RW drive. Four simple pushbuttons panel is designed to provide copy
modes selection and one button easy copy operation.
And ARS-2020 Copy Smart have special designed, a very powerful
Chapter 1. Introduction of Copy Smart
3
fan installed which can keep it cool to protect your CD drives.
ACARD technology further add more values to PC users by making
the ARS-2020 Copy Smart connectable to a PC host computer, this
allow the PC users copy their valuable data from their PC to ARS-
2020 Copy Smart. A bonus Ultra SCSI add-on adapter, an ARS-
2020 SCSI interface extension and two duplication software are
provided by ACARD technology without additional cost. With the
optional True-50 50X (or 56X) CD-ROM drive, the ARS-2020 Copy
Smart users now have a 50X-plus Ultra SCSI CD-ROM, this will
make the ARS-2020 Copy Smart users a world class 50X Ultra
SCSI CD-ROM club member with just a minimum cost.
All this can be only possible by the ACARD continuous development
of both IDE and SCSI RISC chip and the patented SCSIDE
technology. The SCSIDE technology is a highly integrated System
On Chip (SOC) design based on a RISC IDE, a RISC SCSI and high
speed RISC CPU for two way SCSI-IDE command and data
translation. The RISC CPU command set is further implemented by
a flash ROM which provide the plug-and-play ATAPI drive function.
Chapter 1. Introduction of Copy Smart
4
1.2 Feature & Specificaions
1. Dedicated power supply and powerful fan for high precision steady CD
burning requirement.
2. Dimension:180mm(W)x165mm(H)x290mm(D)
3. Pushbutton for copy mode selection which including:
-Test
-Test & copy
-Copy
-1X Copy
-Quick erase of CD-RW
4. Pushbutton for Write Speed selection which including:
-Auto
-16X/14X
-12X/10X
-8X/6X
-4X/2X
5. One pushbutton start
6. One pushbutton stop
7. Self diagnostics when power on
8. Progress light indication
9. Plug and Play ATAPI IDE CD-ROM support
10. Standalone IDE to IDE CD COPYcontroller
11. Standalone SCSI to Dual IDE command/data conversion controller
12. Build-in ACARD SCSIDESOC(system on chip)
13. Standard Ultra-SCSI (20MB/sec) interface to host computer
14. Single SCSI ID selection with two SCSI LUN support
15. One PCI Ultra SCSI adapter for PC
16. Flash ROM for future drive support upgrade
17. CD format supported: All format
-DATACD
Chapter 1. Introduction of Copy Smart
5
-Audio CD
-VCD, and other CD format
18. OS support:
-Win95/98/ME
-WinNT/2000
-Linux
19. Software Bundle:
-Ha! CD Burner Copy Software
-Copy Smart Monitor
-SCSIDEutility
20. Optional: True-5050XSCSI CD-ROM-Auto
Chapter 1. Introduction of Copy Smart
6
ChaCha
ChaCha
Chapter 2.pter 2.
pter 2.pter 2.
pter 2. CopCop
CopCop
Copy Smary Smar
y Smary Smar
y Smart hart har
t hart har
t hardd
dd
dww
ww
warar
arar
are installae installa
e installae installa
e installationtion
tiontion
tion
2.1 Verify your package content
When you open the ARS-2020 box, you should find the following items:
1. MALARS2020X010-0 Operation manual (x1)
2. AEC6710S2P22C00 Ultra-SCSI PCI adapter (x1)
3. CBL50HPM50HPMR-0 50 pins Ultra-SCSI external cable (x1)
4. CBL40X3X40C00F-0 IDE internal cable (x2)
5. CASARS20200000-0 ARS-2020 main system (x1)
6. CDD5X74X6801X2 CD Software (x1)
7. STDCDRX50XI00I-0 True-50 50X CD-ROM drive(optional)
8. STDCDRWXXXI00I-0 CD-R/RW drive (optional)
9. POWCODXUS00000-0 Powercord
If your system come with the optional CD-ROM drive and CD-R/RW drive,
all you have to do is connect the power cord to the ARS-2020 and turn on
the power on the back plane. And after the about 45 second self
diagnostics, you are ready to go.
If your system come with the optional CD-ROM drive, you may have to
install your own CD-R or CD-RW drive. Please follow the following proce-
dure of installation.
Chapter 2. Copy Smart hardware installation
ARS-2020 main system ( x 1 )
Ultra-SCSI PCI adapter ( x 1 )
Operation manual ( x 2 )
CD software ( x 1 )
50-pin Ultra-SCSI
external cable ( x 1 )
IDE internal cable ( x 2 )
Power cord ( x 1 )
* CD-ROM and CD-R/RW drives are optional
7
2.2 Preparing for installation
Step 1: Remove the back cover of Copy Smart.
Step 2: Remove the metal sleeve of Copy Smart.
Chapter 2. Copy Smart hardware installation
8
2.3 Installation of CD-R/RW dirve
Step 1: Adjust your CD-R/RW drive to master drive. (Please refer to your
CD-R/RW drive user’s manual)
Step 2: Place your CD-R/RW drive into lower drive bay of Copy Smart.
(Please Note!! CD-R/RW drive must be installed to lower drive bay only!!)
Chapter 2. Copy Smart hardware installation
9
Step 3: Connect IDE cable from Copy Smart controller board to 40-pin IDE
interface connector of CD-R/RW drive.
Step 4: Connect one of 4-pin DC power cords to the DC input connector of
CD-R/RWdrive.
Chapter 2. Copy Smart hardware installation
10
Step 5: Screw up the device from sliding.
Chapter 2. Copy Smart hardware installation
Indice
Altri manuali Acard Magazzinaggio
