Accu-Scope EXI-600 Manuale utente
MANUAL
73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F)
www.accu-scope.com • info@accu-scope.com
EXI-600
RESEARCH GRADE
INVERTED BIOLOGICAL
MICROSCOPE SERIES
User Manual
This manual is written for EXI-600 research grade inverted biological microscope. To ensure the safety,
obtain optimum performance and to familiarize yourself fully with the microscope, it is strongly
recommended that you read this manual carefully before operating the microscope and put this manual in
a place easy to get for reference.
EXI-600 Research
Grade Inverted
Biological Microscope
User Manual
The warning and notice signal used in this manual
We provide you the most safety and reliable instruments, but improper operate and ignorance of
precautions may lead to a personal injury or a loss of property. To insure the right operating method,
we hope you read this manual carefully before you use the product. Besides, it’s highly recommended
you to put this manual in a place easy to get for easy reference.
In this manual the safety notices will be emphasized by the below symbols, please obey the
statement of these symbols.
The meaning of symbols on the product
Symbol Meaning
Conductor protect terminal
Caution of hot! Remind you of this situation:
The lamp house and spaces nearby will get hot when using. Do
not touch the lamp house in 30 minutes when it’s closed and when
it’s on. The lamp house may still extremely hot after it’s closed,
please ensure enough cooling time before replacing the bulb
This symbol appears in the electrical name board to remind you to
make sure the voltage of your area is the same to the input voltage
Turn on the power , rotate the brightness knob to adjust the
brightness of the field of view
Turn off the power
UV radiation
Turn off the power before open the device
Symbol Meaning
WARNING Ignore this symbol may lead to a serious personal injury even death.
NOTICE Ignore this symbol may lead to a personal injury or a property loss.
CONTENTS
Safety precautions ......................................................................................4
Ⅰ. Structure and names ........................................................................................................5
Ⅱ. Applications ....................................................................................................................6
Ⅲ. Assembly .....................................................................................................................7
Ⅳ. Operating and adjusting..............................................................................................15
Ⅴ. Basic observation ...........................................................................................................20
Ⅵ. Microscopy imaging .................................................................................................24
Ⅶ. Technical specifications .................. ...............................................................................26
Ⅷ. Configuration diagram ..................................................................28
Ⅸ. Trouble shooting ..................................................................................................29
Ⅹ.Maintenance ........................................................................................................31
Ⅺ. Product standard ..............................................................................................................31
Ⅻ. Company information .....................................................................................................31
Safety Precautions
1. Avoid placing the microscope in a place exposed to direct sunlight, with high
temperature, with high humidity or easily vibrated, make sure the platform is flat,
horizontal and stable enough. ( weight of the mainframe is 29.5kg)
2. When moving the microscope, hold the transport handle tightly and keep a distance
between the microscope and the platform before actually moving it.(shown in picture
above)
3. If bacterial solution or water is dripped over the stage, objective or observe tube, turn
off the power supply immediately and wipe out the solution, otherwise the instrument
maybe damaged.
4.
When operating, the lamp house can be considerably hot, make sure there is enough
space around the lamp house for heat dissipation to avoid the heat accumulates and
damage the instrument.
XD 5.
Before turn on the power of lamp house, make sure the power supply is connected properly.
Before replacing the bulb or fuse, turn off the power and wait until the lamp house cooled
Lamp House
Transport handle
Lamp House
Transport handle
completely.
★the indicate bulb: 12V 100WHAL high brightness halogen bulb (OSRAM)
★the fuse should load the correct melting current, do not use a temporary fuse in case of
the broken circuit.
6. Connect the power wires correctly, make sure the instrument is grounded in case of
lightning stroke.
7. Use the dedicated electric wires.
8.
The halogen lamp can radiate UV light thus may cause a burn of eyes and skins. Do
not see through the light directly and take protective measures when using the
microscope as much as possible.
9. The product should store in a place with shelter and no acid gas, alkali, organic solvent
or any harmful substances around.
★a 3-pin plug is reserved for the machine for safety concern , the machine is grounded
through the 3-pin plug. Do not use any other adapter plug or e the safety performance
may decrease.
★Do not put the instrument in a place where is hard to cut off the melting current.
★The protective offered by the device may be damaged if the device is not used in
the way indicated by our company.
Ⅰ
Structure and Names
Pic. 1
Component names:
1 Power switch
2 Left camera port
3 Left coarse/fine focusing handwheel
4 Side ports converter(light path convert—left and right side ports/observe)
5 Eyepiece
6 Trinocular tube
7 Brightness adjustment knob
8 Transmitted illumination shutter
9 Reflected illumination shutter
10 Right coarse/fine focusing handwheel
11 Middle magnification converter
12 Right camera port
13 X/Y axis handwheel of sample stage
14 Multifunction module turntable
15 Field diaphragm of reflected light
16 Aperture diaphragm of reflected light
17 3-hole filter spile
18 Obejective converter
19 Sample stage
20 Turntable condenser
21 Condenser centring screw
22 Lifting handwheel of condenser
23 Transmitted illumination support
24 12V 100W illumination lamp house
25 Filter support
26 Field diaphragm of transmitted light
Ⅱ
Applications
The EXI-600 inverted biological microscope is mainly used to study the cells, cultured
organization and sediment in culture bottles and culture dishes using transmitted and reflected
light.
This device can be used in bright field, dark field, phase contrast, differential
interference contrast, polarized light and fluorescence observation.
Main application of this device: study of human blood and tissue samples, observation
of the connection, activity and growth between live cells, drug reaction, minimally invasive,
external fertilization, toxicity test, digital record, automatic continuous time-point
observation, single molecule detection, etc.
Ⅲ
Assembly
Preparation before assembly and operation of the microscope
Tear down the packaging of the mainframe and the accessories.
The packaging include of mainframe, eyepieces, objectives, condenser support, lamp
house and other accessories such as filters, DIC blocks, dust-proof shield, tools and user
manual. The optional accessories will be packaged individually.
1. Tear down all the packaging, check the goods and confirm the accordance with the
products you purchased.
2. Dismantle the transport handles shown in pic.2.
Put the mainframe in a vibrate-proofed platform and then dismantle the handle with 4mm
hexagon screwdriver.
★Please take proper preservation of the handles.
Altri manuali per EXI-600
1
Indice
Altri manuali Accu-Scope Microscopio
Accu-Scope
Accu-Scope EXC-400 Series Manuale del proprietario
Accu-Scope
Accu-Scope 3000-LED series Manuale utente
Accu-Scope
Accu-Scope 3025-LCD Manuale utente
Accu-Scope
Accu-Scope MT-40 Series Manuale utente
Accu-Scope
Accu-Scope 3012-LED Manuale utente
Accu-Scope
Accu-Scope EXI-410 Series Manuale utente
Accu-Scope
Accu-Scope 3052-LED Manuale utente
Accu-Scope
Accu-Scope 3025-2 Manuale del proprietario
Accu-Scope
Accu-Scope EXC-120-PL Manuale utente
Accu-Scope
Accu-Scope Excelis HD Manuale utente
Accu-Scope
Accu-Scope 3078-HDR Manuale utente
Accu-Scope
Accu-Scope EXC-350-PH Manuale utente
Accu-Scope
Accu-Scope 3025 Series Manuale utente
Accu-Scope
Accu-Scope 3025 Manuale del proprietario
Accu-Scope
Accu-Scope EXC-120 SERIES Manuale utente
Accu-Scope
Accu-Scope 3055 Manuale utente
Accu-Scope
Accu-Scope 3025 Series Manuale utente
Accu-Scope
Accu-Scope 3050 Series Manuale utente
Accu-Scope
Accu-Scope 3012 Manuale del proprietario
Accu-Scope
Accu-Scope EXS-210 Manuale utente
