ACME LED-GBF Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali ACME Proiettore

ACME

ACME theatre spot 150 TS-150 CW Manuale utente

ACME

ACME REFracted RLS 100 Manuale utente

ACME

ACME TS-300M CW Manuale utente

ACME

ACME LED-192RGB Manuale utente

ACME

ACME CB-348TC Manuale utente

ACME

ACME Super Splash Manuale utente

ACME

ACME BARRAGE LED-248 Manuale utente

ACME

ACME DMX 512 Manuale utente

ACME

ACME CM-108 RGB Manuale utente

ACME

ACME LITE PANEL 900 LP-900 WW BD30 Manuale utente

ACME

ACME LED-ST2000 Manuale utente

ACME

ACME CP?64 BD15 Manuale utente

ACME

ACME TV PANEL100 Manuale utente

ACME

ACME LED-CTL6 Manuale utente

ACME

ACME TV PANEL200 Manuale utente

ACME

ACME MEGA STROBE 5000 RGB Manuale utente

ACME

ACME IM-5S-ELC Manuale utente

ACME

ACME LP-900 Manuale utente

ACME

ACME Dynamic 25 Spin LED?GF25 Manuale utente

ACME

ACME BW-545 Manuale utente

ACME

ACME Butterfly quard Manuale utente

ACME

ACME Invincibled LED-767RGBWII Manuale utente

ACME

ACME LED-7474 Manuale utente

ACME

ACME LED-LP400 Manuale utente

Manuali Proiettore popolari di altre marche

VIZULO

VIZULO Micro Martin Guida utente

EuroLite

EuroLite LED IP FL-100 SMD Manuale utente

Cooper Wheelock

Cooper Wheelock XB12 Manuale utente

Allen + Roth

Allen + Roth 17624-000 Manuale utente

ADJ

ADJ 4 STAGE PAK Manuale utente

Cooper Lighting

Cooper Lighting EGL91SW233 Manuale utente

Max

Max 37496 Manuale utente

BEGA

BEGA 85 143 Manuale utente

Beamz

Beamz 151.226 Manuale utente

EuroLite

EuroLite LED IP FL-8 Manuale utente

Ledj

Ledj PERFORMER 36 RGB Manuale utente

Perel

Perel ELS3 Manuale utente

Perel

Perel ELS3WD Manuale utente

LumX

LumX LM 36130 Manuale utente

Xtricity

Xtricity 4-80053 Manuale utente

Stahl

Stahl 6521/4 Series Manuale utente

Ecosense

Ecosense EcoSpec Manuale utente

Ayrton

Ayrton minipanel FX Manuale utente

User Manual

LED-GBF

1. Safety Instruction

Please keep this User Manual for future consultation. If you sell the unit

to another user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before

using the unit.

Before operating, ensure that the voltage and frequency of power supply

match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to

avoid electric shock.

The unit must be installed in a location with adequate ventilation, at least

50cm from adjacent surfaces. Be sure that no ventilation slots are

blocked.

Disconnect mains power before replacement or servicing.

Replace only with the same type.

Make sure there are not flammable materials close to the unit while

operating, as it is fire hazard.

Use safety cable when fixes this unit.

In the event of serious operating problem, stop using the unit

immediately. Never try to repair the unit by yourself. Repair carried out by

unskilled people can lead to damage or malfunction. Please contact the

nearest authorized technical assistance center and always use the same

type spare parts.

Do not touch any wire during operation as high voltage might be causing

electric shock.

2. Installation

You can install the unit on the truss or ceiling. Use clamps to fix the unit to

truss. Always ensure that the unit is firmly fixed to avoid vibration and

slipping while operating. Always ensure that the structure to which you are

attaching the unit is secure. Also always use a safety cable that can hold 10

times of the weight of the unit when installing the fixture.

3. Technical Specification

Gobo Wheel: 15 gobos + white

Power supply: AC 100V/120V/230~250V, 50/60Hz

Power consumption：31W

LED:1 x 10 W Cool White

Dimension：246 x 192 x162 mm

Weight：2.8 kg

For power supply, do not connect in series much more than 19 units,

use another mains supply for next 19 units.

4. Function Instruction

○

1 Safety Ring: Keep the installation safe.

○

2 Gobo wheel switch: Use to set the state of gobo wheel. Set it to

mode, gobo wheel will rotate automatically; set it to mode, gobo wheel

will stop rotating; set it to mode, gobo wheel will rotate to music.

○

3 Reflector Dish: Use to set the state of reflector dish. Set it to mode,

reflector dish will rotate automatically; set it to mode, reflector dish will

stop rotating; set it to mode, reflector dish will rotate to music.

○

4 Mains output: Connect to supply mains power for the next unit.

○

5 Mains input: Connect to supply mains power.

○

6 Microphone: Receive music for the sound active.