60-479 Poznań, ul. Strzeszyńska 56, tel./ fax 061-8439-371
.aco.com.pl
Features:
Works together with digital systems CDNV
and Inspiro
Works as a outside door bell
Ringing volume control
Magnetic handset hang-up mechanism
old-function allows hanging up the
receiver and not disconnecting
Additional function button to operate
external devices
Many handsets can be connected to the
same address
Full support of privacy during
conversation
Individual conversation volume control
(integrated amplifier)
1 – Additional function button; 2 – Basic door opening button; 3 – Ringing volume control switch
Mounting the hand et
After opening the enclosure mount the basis on the all using expansion bolts, the ire is lead
out through hole in the basis. The handset address (usually apartment number) is
programmed using jumpers CODE / ADDRESS, the number beside the jumpers should give
the apartment number after adding up.
Operating the hand et
In order to take the call, pick up the receiver hile it is ringing. During the conversation it is
possible to open the door at the panel that is calling ith button No. 2 (optionally – different
devices can be controlled ith function button No. 1)
Conversation ends automatically after hanging-up.
In standby mode it is possible to set ringing volume, door bell volume (s itch 3). During the
conversation the door bell can be heard in the receiver.
It is possible to open the door or additional gate ithout established connection or picking-up
the receiver through pushing button 2 (this function has to be enabled in the panel) –
confirmation of opening the door is a single tone. If the line is busy and opening the door is not
possible, the triple tone sounds.
If there are more handsets connected to the same physical address and if one of them is
picked up hile all are ringing, the others automatically disconnect (the conversation can not
be heard from other handsets). In case of mixed installation ith handsets / video monitors
and need of connecting more monitors to the same address, you have to use INS-MPR
monitors from ACO range.
Connection diagram
In case of higher amount of handsets you need to consider po er consumption in order to buy
appropriate po er supply (in standby mode and hile many ring at the same time – see
„Technical data”)
1
2
3
