If user want access into Ceiling AP from PC, can be Wireless connection; or LAN cable
connection, but the LAN cable should be designed as follow, and our ceiling AP should
be under Gateway (Default Mode) and AP operation mode!
3. When powered by 24V/1A PoE, this ceiling AP can be PoE power supply for another
ceiling AP from Wan port or Lan port
Attention: line 4,5 must be positive electrode, Line 7,8 must be negative electrode in
RJ45 Port.Just as the picture shows below, Device A’s WAN port connect with 24V/1A
PoE Power Adapter, then A’s LAN port supply 12V/1A power for B.
