ACTi GNR-330 Manuale utente

Quick Installation Guide

GNR-330

64-Channel 6-Bay RAID Tower Standalone NVR

V2017.02.06

2 Standalone NVR Quick Installation Guide

Thank you for purchasing ACTi Standalone Network Video Recorder. This guide

contains all the information you need to quickly set up ACTi INR server system

via local interface.

For detailed instructions on installation, operation and how to log in to INR as

a web client, please refer to the product manuals provided on ACTi corporate

website.

The items below are prerequisite for installation:

• Network cameras

• Network cables

• Network switch

• Monitor (with VGA or HDMI cable)

• USB mouse

• AtleastoneACTi-certied3.5-inchSATAharddisk

Findthecertieddiskmodelsathttp://www.acti.com/hddselector

BEFORE YOU START

Standalone NVR Quick Installation Guide 3

UNPACK

AT A GLANCE

Storage Disk Bays x 6

Power Button

Power Status LED Indicator

USB Ports x 2

Front Panel

Rear Panel

HARDWARE INSTALLATION

USB Ports x 4

VGA Port

LAN1 Port LAN2 Port

AC Power Connector

eSATA Port

HDMI Port / Display Port

Display Port

Line-in

Line-out

Mic-in

This package contains:

• GNR x 1

• HDD Tray Keys Pack x 1

• Disk Screws Pack x 1

• Quick Installation Guide x 1

• Power Cord x 1

• Universal Converter x 1

• Warranty Card x 1

4 Standalone NVR Quick Installation Guide

HARD DISK INSTALLATION

TURN OFF THIS UNIT before you move the trays. Repeat the following steps

to install the disks into Storage Disk bays.

REMOVE THE TRAY

Step 1

Slide the lock tab up, the

hinge tab will pop out by

itself.

Step 2

Pull the hinge tab to 90

degress from the front,

and pull out the tray.

INSTALL THE TRAY

Step 4

Place your thumb on the lock to push

the tray into position in the chassis.

Step 5

Press the hinge tab until it clicks into

place.

MOUNT THE DISK

Step 3

Mount the disk by lock-

ing it with supplied disk

screws to the bottom of

the tray.

CONNECT THE DEVICES

The examle below displays a network consisting of only INR, network cameras

and required peripherals. Please remember to enable the DHCP service on your

router for INR to obtain an IP address automatically. Power Source

Switch

Cameras

eSATA

Storage

USB Devices

VGA Monitor

Note

To assign a static IP address to INR, enter

Windowsandcongurethenetwork

settings in Network and Sharing Center.

Standalone NVR Quick Installation Guide 5

START-UP

CREATE HARDWARE RAID

1. On the unit’s front panel, press down Power Button to turn on the unit.

2. As this unit starts up, you will enter Windows logon screen. Input the

password“123456“tologinasadministrator.

Note

Before removing or in-

serting the hard disk

trays, please make sure

the unit is turned off.

Moving the trays while

the unit is operating

can cause damage to

the disk.

AsthisunitsupportshardwareRAIDconguration,youcanmakediskarraysusing

the bundled software utility.

1. On Windows Desktop, double-click on the shortcut to initialize the

RAID management utility.

2. On Basic RAID Conguration tab, select a RAID type and click on “Apply“.

3.Afterthecongurationiscomplete,theRAIDinformationwillappear.

6 Standalone NVR Quick Installation Guide

CREATE DISK VOLUMES

Use Windows Disk Management to create disk volumes so that INR can

access the available storage space.

1. In Windows Search Box, search and enter “computer management”.

SOFTWARE CONFIGURATION

2. Select “Disk Management”, right-click on a disk title and select “Initialize

Disk”, choose “GPT” as the partition style and click on“OK”.

3.Right-click on the initialized disk and select the volume type to make a new

volume.

Standalone NVR Quick Installation Guide 7

4. On New Volume Wizard window, make sure you assign the desired drive

letter and give a proper label name to this volume.

Note

TomakeaStripedvolume,aMirroredvolumeoraRAID-5volume,itisrecommendedtoselect

disks of the same model and capacity.

Note

For detailed instructions on choosing the RAID types and troubleshooting hard disk issues,

please refer to System Administrator’s manual provided on ACTi Download Center at

http://www.acti.com/downloadcenter

5.After the volume is created, it is shown on volume list and is ready for

recording.

8 Standalone NVR Quick Installation Guide

On Windows Destop, double-click on

to enter NVR interface. Input the default

account and password to log in.

Account: admin

Password: 123456

“123456”isthedefaultpasswordofNVR

system administrator’s user account. For

security reasons, please remember to change it.

CREATE USERS

On NVR screen, click Setup button to enter Setup page and then Users tab.

1. Select “User Groups”, click “Add” to start adding a new user group.

2. Input group ID and click “Apply”.

3.Click on the title bar of Users panel, click “Add” to start adding a new user.

4. Input user’s Account, Password, Email address and select its User Group,

and then click “Apply”.

Standalone NVR Quick Installation Guide 9

SELECT STORAGE DRIVES

1. Go to Setup page and then Storage tab.

ADD CAMERAS

1. Go to Setup page and then Devices tab.

Search Cameras

Use “Search Cameras” to auto-search

the network for ACTi cameras, or

“Search ONVIF Cameras” for

ONVIF-compliant cameras of any

brand. After selecting your desired

cameras, click “Apply”.

Add Camera Manually

If you are adding a camera located

in another network, use “Add

Camera Manually”. Fill in Media

Type, Protocol, IP Address, HTTP

Port, Account and Password. Finally,

click “Get Device Settings” and then

“Apply”.

To nd ONVIF-compliant

cameras, input the correct

accountandpassowrdrst,

and then click to start

searching.

2. Click “Add”.

3.Choose a search

method based

on your network

environment and

camera brand.

2. On Disk Drive

List, de-select C

Drive, and select

other storage

drives.

3.Click “Apply“.

10 Standalone NVR Quick Installation Guide

CONFIGURE CAMERA SETTINGS

1. Go to Setup page and then Devices tab. Choose the camera from Camera

List.

2. Select Basic, Video, PTZ, or Preset Tourtabtocongurerelatedsettings.

SET RECORDING SCHEDULE

The recording service automatically starts full-time recording for a newly added

camera. You can modify the recording schedule to suit your needs.

1. Go to Setup page and then Schedule tab. Select the camera from Camera

List.

2. Choose a recording mode: or

Schedule Recording: Records video continuously during the scheduled

session.

Event Recording:Recordsvideobasedonspecictriggerssuchaswhena

motion is deteced by the camera.

Note

If you have any question during system installation, please feel free to contact our engineers via

ACTi Customer Help Desk platform at http://www.acti.com/CHD

3.Drag on the time

tabletodene

the time session.

4. Click “Apply“.

Indice

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente