ACTi INR-410 Manuale utente
Quick Installation Guide
INR-410
INR-420
INR-430
200-Channel 8-Bay Rackmount Standalone NVR
2 Standalone NVR Quick Installation Guide
Thank you for purchasing ACTi Standalone Network Video Recorder. This guide
contains all the information you need to quickly set up ACTi INR server system
via local interface.
For detailed instructions on installation, operation and how to log in to INR as
a web client, please refer to the product manuals provided on ACTi corporate
website.
The items below are prerequisite for installation:
• Network cameras
• Network cables
• Network switch
• Monitor (with VGA or HDMI cable, depending on your INR model)
• USB mouse
• AtleastoneACTi-certied3.5-inchSATAharddisk
Findthecertieddiskmodelsathttp://www.acti.com/hddselector
BEFORE YOU START
Standalone NVR Quick Installation Guide 3
HARDWARE INSTALLATION
AT A GLANCE
This package contains:
• INR x 1
• HDD Tray Keys Pack x 1
• Disk Screws Pack x 1
• Front Cover x 1
UNPACK
• Power Cord x 1
• Universal Converter x 1
• Warranty Card x 1
• Quick Installation Guide x 1
USB Ports x 4
Disk Bays x 8
USB Ports x 2
VGA Port
AC Power Connector
PS/2 Connector
LAN2 Port
Front Panel
Rear Panel
eSATA Port
(INR-410: 2ports)
(INR-420: 1port)
(INR-430:1port)
HDMI Ports x 2
Power Switch
USB Ports x 2
8 7 6 5 4 3 2 1
In INR-410 and INR-420,
this bay contains System
Disk;
do not remove it
LAN1 Port
4 Standalone NVR Quick Installation Guide
RACKMOUNT THE UNIT
This unit is designed to be mounted on a standard server rack, which
occupies2U(3.5″)ofverticalspace.
INR Sliding Rail Kit
HARD DISK INSTALLATION
REMOVE THE TRAY
Step 1
Slide the lock tab aside,
and the hinge tab will
pop out by itself.
Step 2
Hold the tab lever and
pull out the tray.
INSTALL THE TRAY
Step 4
Place your thumb on
the lock to push the
tray into position in the
chassis.
Step 5
Press the hinge tab
until it clicks into place.
MOUNT THE DISK
Step 3
Loosen the two
screws on the tray to
remove the dummy
disk. Secure the hard
disk on the tray with
the provided disk
screws. Make sure the
disk connector faces
towards the SATA
contacts inside the unit.
Make sure this unit is turned off, and insert the hard disks into the disk bays
following the sequence of tray numbers.
1. Allowaminimumof5cmclearanceatthe
frontandtherearforfront-to-backairowof
the unit.
2. Prepare a rack shelf rated for the unit’s
weight or purchase the rail kit from ACTi,
and install that to support the entire unit.
3.Secure the unit onto the rack.
Standalone NVR Quick Installation Guide 5
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network cameras
and required peripherals. Please remember to enable the DHCP service on your
router for INR to obtain an IP address automatically.
Note
To assign a static IP address to INR, enter
Windowsandcongurethenetwork
settings in Network and Sharing Center.
Power Source
eSATA Storage
USB DevicesMonitor
Switch
Cameras
START-UP
ATTACH THE FRONT COVER
AfteryounishconguringINRsystem,remembertolockthedisktraysusing
the provided keys and attach the front cover to the unit’s front panel.
Step 2
Press the latch and push the right end
Step 1
Align the left end hooks
to the holes on the
unit’s left handle.
1. On the unit’s rear panel, press down the Power Switch
to the side with “ l ” mark.
2. On the unit’s front panel, press down Power Button to turn on the unit.
3.As this unit starts up, you will enter Windows logon screen, and input the
password “123456“ to log in as administrator.
towards the unit’s right
handle until it clicks
into place.
Without Front Cover
With Front Cover
6 Standalone NVR Quick Installation Guide
CREATE HARDWARE RAID (OPTIONAL)
(This section is an optional step for INR-420 and INR-430 only.)
INR-420/INR-430supportshardwareRAIDconguration,andthemaking of
disk arrays is done with the bundled software HighPoint Web RAID.
1. On Windows Desktop, double-click on the shortcut to initialize High
Point Web RAID Management Software.
2. Log in with default username/password: RAID/hpt
3.SelectLogical then Create Array, create an array by selecting its Array
Type and disks, and then click “Create”.
4. Select Logical, the new array will appear on Logical Device Information list.
Standalone NVR Quick Installation Guide 7
SOFTWARE CONFIGURATION
3.Right-click on the initialized disk and select the volume type to make a new
volume. On New Volume Wizard window, make sure you assign a proper
drive letter to the volume.
4. After the volume is created, it is shown on volume list and is ready for
recording.
Use Windows Disk Management to create disk volumes so that INR can
access the available storage space.
1. In Windows Search Box, search and enter
“computer management”.
2. Select “Disk Management”, right-click on a disk title and select “Initialize
Disk”, choose “GPT” as the partition style and click on“OK”.
CREATE DISK VOLUMES
8 Standalone NVR Quick Installation Guide
LOG IN
On Windows Destop, double-click on
to enter NVR interface. Input the default
account and password to log in.
Account: admin
Password: 123456
“123456”isthedefaultpasswordofNVR
system administrator’s user account. For
security reasons, please remember to change it.
CREATE USERS
On NVR screen, click Setup button to enter Setup page and then Users tab.
1. Select “User Groups”, click “Add” to start adding a new user group.
2. Input group ID and click “Apply”.
3.Click on the title bar of Users panel, click “Add” to start adding a new user.
4. Input user’s Account, Password, Email address and select its User Group,
and then click “Apply”.
Standalone NVR Quick Installation Guide 9
SELECT STORAGE DRIVES
1. Go to Setup page and then Storage tab.
ADD CAMERAS
1. Go to Setup page and then Devices tab.
Search Cameras
Use “Hybrid Search” to auto-search
the network for all cameras, or
“ONVIF Search” for
ONVIF-compliant cameras of any
brand. After selecting your desired
cameras, click “Apply”.
Add Camera Manually
If you are adding a camera located
in another network, use “Add
Camera Manually”. Fill in Media
Type, Protocol, IP Address, HTTP
Port, Account and Password. Finally,
click “Get Device Settings” and then
“Apply”.
To nd ONVIF-compliant
cameras, input the correct
accountandpassowrdrst,
and then click to start
searching.
2. Click “Add”.
3.Choose a search
method based
on your network
environment and
camera brand.
2. On Disk Drive
List, de-select C
Drive, and select
other storage
drives.
3.Click “Apply“.
10 Standalone NVR Quick Installation Guide
CONFIGURE CAMERA SETTINGS
1. Go to Setup page and then Devices tab. Choose the camera from Camera
List.
2. Select Basic, Video, PTZ, or Preset Tourtabtocongurerelatedsettings.
SET RECORDING SCHEDULE
The recording service automatically starts full-time recording for a newly added
camera. You can modify the recording schedule to suit your needs.
1. Go to Setup page and then Schedule tab. Select the camera from Camera
List.
2. Choose a recording mode: or
Schedule Recording: Records video continuously during the scheduled
session.
Event Recording:Recordsvideobasedonspecictriggerssuchaswhena
motion is deteced by the camera.
Note
If you have any question during system installation, please feel free to contact our engineers via
ACTi Customer Help Desk platform at http://www.acti.com/CHD
3.Drag on the time
tabletodene
the time session.
4. Click “Apply“.
3.Cllick“Apply“
to save the
settings.
Altri manuali per INR-410
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali ACTi Registratore digitale
ACTi
ACTi ENR-420 Manuale utente
ACTi
ACTi INR-340 Manuale utente
ACTi
ACTi ENR-220P Manuale utente
ACTi
ACTi INR-350 Manuale utente
ACTi
ACTi ENR-030-V5.03.01.01-AC Come usare
ACTi
ACTi XNR-4200 Manuale utente
ACTi
ACTi INR-413 Manuale utente
ACTi
ACTi ENR-110 Manuale per l'uso e la cura
ACTi
ACTi ENR-190 Manuale utente
ACTi
ACTi INR-406 Manuale utente
ACTi
ACTi ZNR Series Manuale utente
ACTi
ACTi GNR-330 Manuale utente
ACTi
ACTi GNR-350 Manuale utente
ACTi
ACTi ENR Series Manuale utente
ACTi
ACTi INR-411 Manuale utente
ACTi
ACTi INR-415 Manuale utente
ACTi
ACTi ENR-620P Manuale utente
ACTi
ACTi ENR-1000 Manuale utente
ACTi
ACTi INR-100 Manuale utente
ACTi
ACTi NVR 3.0 Manuale utente
