ACTi ACM-3401 Series Manuale utente

Megapixel IP Dome

ACM-3401

Megapixel Day&Night IP Dome

ACM-3411

Ver. 080130

Quick Installation Guide

0-1

0Getting Started

1.1 PACKAGE CONTENTS

ACM-3401/3411 Power Adaptor (Option)

Product CD Accessory

Warranty Card Drill Template

Drill template

0-2

1.2 PHYSICAL DESCRIPTION

1. Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button. Reconnect the

power cable while continuing to hold the reset button.

Step 3: Keep holding the reset button depressed for a while,

release the reset button. The unit will start up with factory default

settings.

2. Ethernet Port

The IP device connects to the Ethernet via a standard RJ45

connector. Supporting NWAY, this IP device can auto detect the

speed of local network segment (10Base-T/100Base-TX

Ethernet).

3. Power Input

If your power input is DC12V. Please follow the description on

the connector to connect to power.

0-3

4. Audio Input / Output

The IP device supports audio input and output with terminal

block.

PIN NAME DESCRIPTION

1 12V DC Power Input

2 GND Ground Pin

0-1

1.3 BASIC CONNECTIONS

Follow the procedures below to connect the IP device to the respective

apparatuses.

1. Connect the power adaptor to IP device

2. Connect IP device’s ethernet port to an Ethernet (RJ45 connectors). If your

IP device has PoE built-in, you can regard it as a PD and connect it

directly to a PSE device like PoE switch.

3. Connect a PC to the Ethernet hub (RJ45 connectors)

NOTE: You may find a support package for help you getting familiar

with PoE. Please visit our web site, and get the support document

TS-00040.

1-2

1Quick Tour

This section guides you with a quick tour on this IP device.

2.1 Configure this IP Device

2.1.1 Make sure network environment

Default IP of this IP device is 192.168.0.100. Please make sure this IP device and

your PC are on the same network segment before running the installation.

Please set the settings as below.

IP address: 192.168. 0.xxx

Subnet mask: 255.255.255. 0

(NOTE: xxx should be a number

from 1 to 254, but 100 is

excepted.)

1-3

2.1.2 Open Internal Explorer with IP address

NOTE: If your web browser is earlier than IE6, then download IE6 is

recommended.

NOTE: This IP device default IP address is set to 192.168.0.100

2.1.3 Login with default administrator’s account & password

NOTE: Default administrator account is set to Admin, password is set to

123456, and click button.

1-4

2.1.4 Preview the video

2.1.5 Set the new IP address

1-5

*IP Address : The default IP address is 192.168.0.100.

*Subnet Mask : The default subnet mask is 255.255.255.0

*Click button

NOTE: In your Client PC, please make sure the setting of Network

Connections Type is set to Auto Negotation, since this IP device follows

MII standard. Otherwise, you might not see the live image.

IMPORTANT: After the IP address is changed, please record this IP

address. There’s no way to connect to the IP device if user forgets the

new IP address.

2.1.6 Check Default Video Setting

2.1.7 Click Save Reboot to restore all settings and please wait about 30 seconds

for system reboot.

Altri manuali per ACM-3401 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ACTi Telecamera IP

ACTi

ACTi TCM-4201 Manuale utente

ACTi

ACTi ACM-4200 series Manuale utente

ACTi

ACTi ACM-4201 Manuale utente

ACTi

ACTi ACM-8511 Manuale utente

ACTi

ACTi KCM-5211 Manuale utente

ACTi

ACTi B21 Manuale utente

ACTi

ACTi ACM-4201 Manuale utente

ACTi

ACTi TCM-5611 Series Manuale utente

ACTi

ACTi TCM-1511 Istruzioni per l’uso

ACTi

ACTi ACM-1310 series Manuale utente

ACTi

ACTi ACM-3701E Manuale utente

ACTi

ACTi Indoor Dome Series E610 Manuale utente

ACTi

ACTi ACM-5611 Manuale utente

ACTi

ACTi TCM-4301 Manuale utente

ACTi

ACTi ACM-1430 series Istruzioni per l’uso

ACTi

ACTi CAM-5120 Manuale utente

ACTi

ACTi ACM-5811 series Manuale utente

ACTi

ACTi KCM-3211 Manuale utente

ACTi

ACTi CAM-5100 Manuale del proprietario

ACTi

ACTi ACM-4201 Istruzioni per l’uso

ACTi

ACTi ACM-4000 Istruzioni per l’uso

ACTi

ACTi TCM-56x1 series Manuale utente

ACTi

ACTi TCM-7811 Istruzioni per l’uso

ACTi

ACTi CAM-5200S Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente