ACTi ACM-3701 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali ACTi Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Megapixel IP Dome

ACM-3401

Megapixel Day&Night IP Dome

ACM-3411

Ver. 080130

Quick Installation Guide

Megapixel IP Mini Dome

ACM-370x series

Ver. 090518

Quick Installation Guide

0-1

0Getting Started

1.1 PACKAGE CONTENTS

ACM-3701/ACM-3703 Product CD

Warranty Card Drill Template

Mount Screws Allen/Hex Key

RJ45 Field Installable Feed M12 Field Installable Feed

Through Adaptor (ACM-3701 Only) Through Adaptor (ACM-3703 Only)

1

0-2

1.2 PHYSICAL DESCRIPTION

ACM-3701 ACM-3703

1. Ethernet Indicator LED

The LED will indicate ethernet speed and active states after IP

camera has connected completely.

2. Power LED

The LED will light up after IP camera has successfully completed

the boot process

3. Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button. Reconnect

the power cable while continuing to hold the reset button.

Step 3: Keep holding the reset button depressed around 16

seconds, release the reset button. The unit will start up with

factory default settings.

0-3

Model

ACM-3701

ACM-3703

Picture

Type

Rugged RJ-45 Connector

Rugged M12 Connector

4. Ethernet Port

The IP device connects to the Ethernet via a female RJ-45

industrial connector(ACM-3701) or a male M12 D-code Ethernet

connector(ACM-3703)

The Ethernet port supporting Power over Ethernet.

Supporting NWAY, this IP device can auto detect the speed of

local network segment (10Base-T/100Base-TX Ethernet).

1-1

1.3 BASIC CONNECTIONS

Follow the procedures below to connect the IP device to the respective

apparatuses.

1. Connect this IP device’s ethernet port to an Ethernet (RJ45/ M12

connector). IP device has only PoE built-in, you must regard it as a PD and

connect it directly to a PSE device like PoE switch.

2. Connect a PC to the Ethernet hub

1Quick Tour

NOTE: You may find a support package for help you getting familiar

with PoE. Please visit our web site, and get the support document

TS-00040.

2

1-2

This section guides you with a quick tour on this IP device.

2.1 Configure this IP Device

2.1.1 Make sure network environment

Default IP of this IP device is 192.168.0.100. Please make sure this IP device and

your PC are on the same network segment before running the installation.

2.1.2 Open Internal Explorer with IP address

Please set the settings as below.

IP address: 192.168. 0.xxx

Subnet mask: 255.255.255. 0

(NOTE: xxx should be a number

from 1 to 254, but 100 is

excepted.)

1-3

NOTE: If your web browser is earlier than IE6, then download IE6 is

recommended.

NOTE: This IP device default IP address is set to 192.168.0.100

2.1.3 Login with default administrator’s account & password

NOTE: Default administrator account is set to Admin, password is set to

123456, and click button.

2.1.4 Preview the video

1-4

2.1.5 Set the new IP address

*IP Address : The default IP address is 192.168.0.100.

1-5

*Subnet Mask : The default subnet mask is 255.255.255.0

*Click button

NOTE: In your Client PC, please make sure the setting of Network

Connections Type is set to Auto Negotation, since this IP device follows

MII standard. Otherwise, you might not see the live image.

IMPORTANT:After the IP address is changed, please record this IP

address. There’s no way to connect to the IP device if user forgets the

new IP address.

2.1.6 Check Default Video Setting

2.1.7 Click Save Reboot to restore all settings and please wait about 30 seconds

for system reboot.