ActionTec ScreenBeam Mini Manuale utente

Wireless Display

Receiver

Model # SBWD50A

Installation Guide

This Installation Guide will walk you through the easy steps

to set up your ScreenBeam Mini Receiver. During this

process, we’ll show you how to :

AInstall the Receiver

B1Connect Using

Intel WiDi App

B2Connect Using

Windows 8.1 or Higher

B3Connect Using WiFi

Miracast-Enabled Device

Part No: 0530-0703-000

Welcome!

Step2Plug the ScreenBeam Mini Display Receiver into an

available HDMI port on your HDTV.

Step3Plug the male connector (smaller end) of the USB

cable to the ScreenBeam Mini USB micro-port labled “Power.”

AInstall the Receiver

Congratulations on your purchase of a ScreenBeam Mini

Wireless Display Receiver. The Mini Wireless Display Receiver

connects to your compatible Intel WiDi or Miracast wireless

display-capable device, and displays the device’s screen on

your HDTV.

Step1Get the ScreenBeam Mini Wireless Display Receiver

and USB cable from the ScreenBeam Mini box.

Step4Plug the male connector (larger end) of the USB

cable to a USB port on your HDTV.

B1Connect Using Intel WiDi App

Step5Turn on your TV and switch the input source until

you see the Ready to Connect screen.

Note: If your device’s OS is Windows 8.1 or higher, proceed to

section B2(“Connect Using Windows 8.1 or Higher”) for

connection instructions.

The ScreenBeam Mini Receiver is now connected to your

HDTV. Proceed to one of the next three sections of this Guide

(depending on the device you are using to connect to

ScreenBeam Mini) to nish the connection procedure.

Note: If you cannot plug the Receiver into an HDMI port on

your TV (due to other components, or a poorly accessible

port), use the supplied HDMI cable to connect the Receiver.

Step2The device scans for

available receivers. Select the same

receiver name as seen on the HDTV

and click Connect. (The Connect

Automatically checkbox is optional.)

Step3Wait until the Receiver

displays a PIN on the HDTV, and a

PIN entry box on the screen of the

WiDi device. Enter the PIN in the

PIN entry box on the WiDi device,

then click Continue.

Step1Find the Intel Wireless Display application on the

device and launch it. To nd the application, go to Windows

Search on your device and search for“Intel WiDi” in your apps.

Note: ScreenBeam Mini only supports the 2.4GHz wireless

frequency. Make sure your device is not connected to a 5GHz

wireless router prior to connecting ScreenBeam Mini.

Step4The HDTV displays

messages to show the status of the

connection process.

Step5AConnection Successful

screen appears on your device’s

screen, as well as on the HDTV.

Note: Make sure the device supports Intel Wireless Display

(WiDi) software version 3.5 or higher. To nd out what version

of Intel WiDi your device has, enter the Intel WiDi application

and click Help, then navigate to the “About WiDi” section. To

obtain the latest Intel WiDi software and drivers, go to:

http://www.intel.com/go/wirelessdisplayupdate

Display Tip: If the edges of the device screen cannot be

seen on the HDTV, adjust cropping. To do this, enter the

WiDi application and click Settings. Navigate to the “Picture

and Sound” section, click Adjust cropping…, and adjust the

HDTV picture by clicking plus (+) or minus (-).

B2 Connect Using Windows 8.1 or Higher

Step1From the Windows desktop,

navigate to the Charms menu and

select Devices. You can also use the

shortcut keys, Windows + K.

Step2From the Charms menu,

click the Project icon.

Step3From the Project screen,

select Add a wireless display.

Step4Select the ScreenBeam

Receiver from the list.

Step5Enter the PIN as displayed

on the television screen, then

connect and display.

Note: If you are running Windows 8.1 and the screens above

do not appear, go to http://www.actiontec.com/widi81 for

the latest software updates.

Step1On a Miracast-enabled Android device, locate and

open the Wireless Display Application.

B3Connect Using Miracast-Enabled Device

You can connect to ScreenBeam Mini from a Miracast-enabled

Android device, such as a smartphone, tablet, or game console

(nd the wireless display feature in Settings). Also, the device

should be running the latest software for best performance.

Note: The name of the Wireless Display Application depends

on the device type and model. Refer to the device’s carrier or

manufacturer user manual for more details.

Step2The Wireless Display Application scans for available

receivers. Select the ScreenBeam Receiver from the list.

Step3Wait for the device to associate with the Receiver.

When it does, the device’s screen will be displayed on the HDTV.

Go to http://www.actiontec.com/support for product

support, updates, and more information including:

• Firmware Updates • Troubleshooting • Registration • FAQs

CProduct Support & Additional Information

FCC Information and Copyright

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment .This equipment should be installed and operated with minimum distance 20cm

between the radiator& your body. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Questo manuale è adatto per i seguenti modelli

Altri manuali ActionTec Ricevitore

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec ScreenBeam 1000 EDU Manuale utente

ActionTec

ActionTec ScreenBeam Pro SBWD100A EDU Manuale utente

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec SBWD50A Manuale utente

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec ScreenBeam Mini 2 SBWD60A Manuale utente

ActionTec

ActionTec ScreenBeam series Manuale utente

ActionTec

ActionTec ScreenBeam 960 Guida di riferimento rapido

ActionTec

ActionTec MWTV3TX Manuale utente

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec ScreenBeam Enterprise 950P Istruzioni operative e di manutenzione

ActionTec

ActionTec ScreenBeam 960 Manuale utente

ActionTec

ActionTec ScreenBeam Enterprise 950 Manuale utente

ActionTec

ActionTec SBWD50A Manuale utente

ActionTec

ActionTec ScreenBeam Enterprise SBWD700A Manuale utente

ActionTec

ActionTec SBWD50A Manuale utente

ActionTec

ActionTec ScreenBeam Mini 2 SBWD60A Manuale utente

ActionTec

ActionTec ScreenBeam Mini 2 Manuale utente

ActionTec

ActionTec ScreenBeam Mini2 Manuale utente

ActionTec

ActionTec MyWirelessTV MWTV200T Manuale utente

ActionTec

ActionTec SBWD100B Manuale utente

ActionTec

ActionTec ScreenBeam 1100 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente