Active Mobility NEOS 150 Folding Manuale utente
NEOS 150 Folding
MOBILE PATIENT LIFTING HOIST
USER MANUAL
IMPORTANT:
Do not use the Neos 150 Folding PATIENT LIFTING HOIST
without having first read this anual.
Unit 8, 110-120 Silverwater Rd, Silverwater NSW 2128
Phone: 02 9649 2111
E ail: sales@activemobility.com.au
www.activemobility.com.au
Doc Neos 1.1
NEOS 150 Folding User Manual | 2
CONTENTS
NEOS 150 Folding Overview 3
I portant safety considerations 4
NEOS 150 Folding Asse bly instructions 6
Folding instructions 7
Hoist operation and charging 8
Lifting procedures 11
Maintenance 13
Trouble shooting 14
Specifications 15
Warranty 16
Slings 17
Key to sy bols 18
Parts list 18
Log book 19
Doc Neos 1.1
NEOS 150 Folding User Manual | 3
Neos 150 Folding
Overview
The NEOS 150 Folding
is
a co pact ergono ic designed
ediu sized heavy duty obile patient lifting hoist with a
safe working load of 155kg.
This lifter is ideally suited as a co pact and lightweight hoist in
a ho e care environ ent.
The NEOS 150 Folding whilst being co pact provides
superior patient space. The NEOS 150 Folding in fact offers
ore patient space than ost other larger size lifters. The
swivel feature of the detachable yoke allows a patient to be
rotated through 360° at full lift height, thus aking the carer’s
job easier and safer.
The NEOS 150 Folding lifting range allows patients to be
lifted fro the floor, bed or chair with ease and safety.
The NEOS 150 Folding is a powered unit using trusted
industry leading LINAK co ponents, giving a safe working
load (SWL) of 150kg
Options available with the NEOS 150 Folding
Standard spreader bar
Weighing device¹
The ALLEGRO CONCEPTS range of patient lifting equip ent,
including lifters, slings and accessories, has been designed
and tested to co ply with AS ISO 10535 – 2011, (Hoists for
the transfer of disabled persons – Require ents and test
ethods)
¹
CAUTION - Weigh scale is not intended for clinical assess ent.
Doc Neos 1.1
NEOS 150 Folding User Manual | 4
IMPORTANT SAFETY CONSIDERATIONS
INTENDED USE OF THE PRODUCT
The
NEOS 150 Folding
co pact obile patient lifting hoist has
been designed to lift and transfer a less able person with the
assistance of a carer.
The
NEOS 150 Folding
should be used with one of the ALLEGRO
range of patient slings, as assessed by a co petent trained person.
NB. Not all slings and accessories are compatible with this hoist. If
you are unsure please contact ALLEGRO CONCEPTS.
The correct and appropriate use of the
NEOS 150 Folding
hoist
will reduce the risks associated with anual patient handling. The
lifting / transferring task should be assessed & planned by a trained
user.
SAFETY CONSIDERATIONS
Ensure that all users read this guide before operating the
hoist.
Do not operate the hoist without training in the safe
operation of hoists & slings. IF IN DOUBT DO NOT USE.
Only use slings which have been assessed as suitable by a
co petent trained professional.
Read the relevant sling users guide which is provided with
each sling, before use.
Do not use the hoist if there is any doubt about wear or
da age to the unit. In particular the spreader bar or the
ALLEGRO Pivot Fra e.
Do not use the hoist if there is any fraying or stitch da age
to the sling or if the sling is da aged in any other way.
DO NOT EXCEED THE SAFE WORKING LOAD OF THE
NEOS 150 Folding
HOIST 150kg
Ensure when the hoist is in use that the surrounding area is
clear and the person being lifted is clear of all obstructing
objects.
Doc Neos 1.1
NEOS 150 Folding User Manual | 5
Jib
Battery &
Control
Box
Push
Handle
Mast
Leg
Base Chassis
Spreader
Bar
Actuator
Direction of Travel
Doc Neos 1.1
NEOS 150 Folding User Manual | 6
ASSEMBLY INSTRUCTIONS
NEOS 150
Folding
The ALLEGRO range of patient lifting and transfer hoists are fully
asse bled, load tested and certified at the factory before being partially
dis antled for packing and shipping.
Use the instructions below as a guide to asse ble your
NEOS 150
Folding
hoist
.
1. Re ove lifter co ponents fro protective packing and lay out
on a s ooth surface to prevent da age to powder coating on
lifter sub asse blies.
2. Lift the ast asse bly and slide into ast holder receiving
socket on base chassis. Ensure the ast asse bly is
co pletely engaged in the ast socket. Insert the locating bolt
through the chassis and base and tighten the locking levers to
prevent ove ent between ast and base chassis.
3. Attach lift actuator to jib, by aligning actuator clevis with actuator
ount bracket. Insert bolt and tighten nylock nut.
4. Attach push handle asse bly with bolts supplied with handle
asse bly.
5. Attach battery by clipping battery pack on top of control box.
6. Plug the lift actuator cable into port 1 positioned on the
underside of the control box, ensuring it is driven fir ly ho e in
the socket.
7. Your
NEOS 150 Folding
hoist
uses a anual leg
adjust ent via a foot pedal. This leg adjuster does not need any
further asse bly.
8. Plug the handset lead into the large socket on underside of
control box. (See next diagra ) ensure align ent of tongue on
handset plug with groove in control box handset connection
port. When aligned press ho e fir ly. A s ear of Vaseline on
the o ring ay assist if plug is tight.
9. Check operation of lifter via handset, ensuring that the RED
EMERGENCY STOP BUTTON ON THE CONTROL BOX IS
RELEASED. Turn the knob quarter turn clockwise to release.
Doc Neos 1.1
NEOS 150 Folding User Manual | 7
FOLDING INSTRUCTIONS
1. Lower boo or jib to its lowest position and press the safety
stop button.
2. Close legs to it narrowest position
3. Pull lever on base to close legs co pletely
4. Secure the boo to the ast with the catch provided under
the lower part of the ain actuator.
5. Undo hand lever on side of chassis and re ove ast
location bolt
6. Gently lift the ast up a little and fold down towards front.
7. Secure ast with straps located at end of legs.
8. Insert Mast locking bolt thru the location holes and tighten
with the hand levers
9. Hoist can be lifted by the handles and oved, using the rear
wheels as a trolley.
Doc Neos 1.1
NEOS 150 Folding User Manual | 8
HOIST OPERATION AND CHARGING
HANDSET
The handset activates the lift actuator by the use of two low
pressure buttons, protected by a strong plastic cover. These
are sy bolised by arrows (diagra ). The arrows indicate the
direction of travel to raise or lower the hoist jib. When either
button is released the jib will re ain in position.
The
NEOS 150 Folding
hoist incorporates an actuator
driven leg opening adjust ent. Two buttons will be seen on
the handset with arrows and sy bolised legs indicating the
direction of travel. This function allows an unrestricted range
of leg adjust ent.
The handset is also fitted with a battery indicator light. This
will flash when the batteries reach a axi u discharge of
18 volts. NB the light will only flash when the hoist is under
load.
The connection for the handset is located on the underside
of the control box.
Handset Port
Lift Actuator –
Port 1
Doc Neos 1.1
NEOS 150 Folding User Manual | 9
ACTUATOR
The
NEOS 150 Folding
obile patient lifting hoist uses a LINAK
single speed actuator with an e ergency controlled lowering release
handle. (Lift up red tab located at base of actuator). This allows the
patient to be lowered in the event of a fault in the hoist or deep
discharged batteries.
CHARGING
The
NEOS 150 Folding
is supplied with a LINAK external wall
ount charger. This is powered by plugging the 3 pin plug into a
standard 240V ac outlet
To recharge the battery pack, perfor the following steps
1) Release battery pack fro control box by pulling the handle
on the pack towards you. Use both hands to support the
battery pack when re oving or replacing it.
2) Clip the battery pack fro the control box onto the charging
unit, ensuring it is seated properly on the charger base
3) Charger will auto atically activate the charging sequence
CHARGING INDICATOR DISPALY
GREEN ains power on light will be illu inated when
connected to 240 v power supply.
ORANGE LIGHT illu inated indicates battery currently
charging.
ORANGE LIGHT will extinguish when battery pack is fully
charged.
Doc Neos 1.1
NEOS 150 Folding User Manual | 10
NEOS 150
Folding
External Charging Unit
CHARGING DOs & DON’Ts
DO
Do charge the battery whenever possible. This will extend the battery
life. A large nu ber of cycles can be obtained fro operating on the
batteries, but battery lifeti e is reduced with frequent discharging.
Do inspect all cables particularly the ains power cable on
the charger for any da age; replace where necessary.
Do stow the handset and if fitted with charger, the ains
power cable when transporting the hoist.
Do clean the actuators, control box, charger, battery and
handset at regular intervals to re ove dust and dirt.
DON’T
Don’t allow the batteries to fully discharge before connecting
to charger. The batteries are a lead acid gel type that can be
trickle charged continuously and have a high current
discharge capacity. The batteries are not the nickel cad iu
type and ust not be periodically fully discharged. Battery
life is greatly reduced by deep or co plete discharging of the
batteries. Longer lifeti e is obtained by aintaining fully
charged batteries.
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
